|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 18th, 2016, 21:07
|
#1 |
|
strike industries megafin in a KWA m4, fit?
Guys, I have a KWA RM4A1 (my first airsoft gun) and would like to know if this rail system, in this size, would fit in it:
http://www.torontoairsoft.com/Strike...rd_p_4364.html I'm a bit afraid to buy a rail longer than the actual barrel or that wouldn't hold with the stock outer barrel format. |
|
|
|
|
August 25th, 2016, 16:28
|
#2 |
|
I don't think that rail system would fit but I am not 100%. The barrel nut is standard aeg threading so most standard keymods will work. Airsoft depot has a bunch of keymods that will fit if that's what your looking for. I just installed the 16.2" wirecutter on my km4 from there and they had a bunch of different lengths of regular keymods
|
|
|
|
|
|
August 26th, 2016, 14:17
|
#3 |
|
well, it turned out it worked like a charm. extremely easy to install, no movement like any good free floating, very low profile, love it. I'll post some pictures this weekend for those curious about it.
|
|
|
|
|
|
September 5th, 2016, 20:29
|
#4 |
|
I have the same one. Very easy to grip to the small hex diameter.
The finish to grippy , edges are sharp and feel a little abrasive on bare hands. Other than that, it is super light and strong. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
