14mm die for suppresser

[Nateman332]

Hey, I was wondering if anyone knows the die I should use to thread an outer barrel to fit a 14mm ccw suppresser? Of course I know I need a 14mm die but is it national course or fine exctra.

Sent from my SGH-I337M using Tapatalk

[cetane]

M14x1.0 is the size you need. It's not common in right hand (cw), even less common in left hand threads (ccw)

[Kokanee]

ebay is your friend; found one a year ago for a very reasonable price.

[Tankdude]

I have a set collecting dust.

You can buy them from www.e-taps.com

Price used to be ok, but the exchange is killer right now.

[freshblake]

Be sure to get the die starter too.

[XZIVR]

I have a lathe and can cut them as long as there's space on the barrel to chuck it in...

[Red Dot]

Worst case contact pestobanana on here, he had a set of die and taps from me.

eBay that from China is your best bet though.

[Nateman332]

Originally Posted by XZIVR

I have a lathe and can cut them as long as there's space on the barrel to chuck it in...

It's on a revolver, so you can't Chuck it without it being out of balance.

Originally Posted by Nateman332

Hey, I was wondering if anyone knows the die I should use to thread an outer barrel to fit a 14mm ccw suppresser? Of course I know I need a 14mm die but is it national course or fine exctra.

Sent from my SGH-I337M using Tapatalk

Sent from my SGH-I337M using Tapatalk

[Nateman332]

Originally Posted by Red Dot

Worst case contact pestobanana on here, he had a set of die and taps from me.

eBay that from China is your best bet though.

Great, thanks. I tried aclands granger in town but 14mmX1.25 is the smallest they have. So eBay it is.

Sent from my SGH-I337M using Tapatalk

[Nateman332]

Originally Posted by cetane

M14x1.0 is the size you need. It's not common in right hand (cw), even less common in left hand threads (ccw)

Thanks, just what I was looking for.

Sent from my SGH-I337M using Tapatalk