good .32 .36 bbs?

hyz980517 · October 12th, 2015, 05:18

hi guys, any suggestions on some good brand .32 .36 bbs? easy to get is also very important(canadian retailer if possible), i live in great vancouver area. bio or non-bios are both fine. white color preferred. thx!

ThunderCactus · October 12th, 2015, 12:00

I didn't think anyone in BC was allowed to use non-bio?
There aren't any BBs over .30 that are truly eco-friendly

cetane · October 12th, 2015, 14:48

There was a thread started on airsoft mechanics about the new vfc ones... Curious as to how they will be...?

https://scontent-sea1-1.xx.fbcdn.net...aa&oe=56A7B5E7

https://www.facebook.com/WGCShop/pho...type=3&theater

http://www.airsoftmechanics.com/inde...23.0;topicseen

hyz980517 · October 12th, 2015, 21:16

Quote:

Originally Posted by ThunderCactus

I didn't think anyone in BC was allowed to use non-bio?
There aren't any BBs over .30 that are truly eco-friendly

big foot allows non-bio bbs

lurkingknight · October 12th, 2015, 21:26

I use bioshot .32s without issue. There was a batch that were bad but it seems to be taken care of now. I find they perform a bit better than the madbull .32s But the polish on the mabulls is a bit better, while the bioshots fly in a tighter cone.

The issue I was having was non feeding in aeg midcaps, but they worked fine in pistol, highcap or sniper mags. I had about 10 bags of good rounds, then a restock that was recalled was bad, all those bags should be off the market. The newest batch at airsoftstore is working great.

The weight on the .32 bioshots is closer to .31.

Stealth · October 13th, 2015, 00:00

Just to clarify what Lurkingknight has said, I had a batch of 0.32g Bioshots which were slightly larger in diameter and would jam up in double-stack midcaps.

That batch has been recalled and destroyed, so any new bags you grab from me will feed properly and flawlessly. I haven't had any complaints since.

KenTsui · October 13th, 2015, 16:04

Quote:

Originally Posted by Stealth

Just to clarify what Lurkingknight has said, I had a batch of 0.32g Bioshots which were slightly larger in diameter and would jam up in double-stack midcaps.

That batch has been recalled and destroyed, so any new bags you grab from me will feed properly and flawlessly. I haven't had any complaints since.

How long ago was this? Is there a way to tell which batch I got?

Stryker · October 13th, 2015, 17:03

Elite Force makes BIO's 0.32 weight bb's!

hyz980517 · October 13th, 2015, 17:58

Quote:

Originally Posted by Stealth

Just to clarify what Lurkingknight has said, I had a batch of 0.32g Bioshots which were slightly larger in diameter and would jam up in double-stack midcaps.

That batch has been recalled and destroyed, so any new bags you grab from me will feed properly and flawlessly. I haven't had any complaints since.

Do u have any .36 in stock? Or .32 performs better than .36?

lurkingknight · October 13th, 2015, 18:28

what gun are you putting these in?

SuperHog · October 13th, 2015, 20:24

What were the diameters of the defective bb's?

Most magazines are so loose it shouldn't jam them. Also I run barrels with ID of 6.05 to 6.10. So unless these bb's are so big, no wonder they jammed and how could the company ship them knowing they are so far off? The other big question, do the molds not determine the final diameter of the bb's, plus or minus tolerance?

hyz980517 · October 13th, 2015, 20:58

Quote:

Originally Posted by lurkingknight

what gun are you putting these in?

For 450fps dmr, flat hopped orga 6.13 barrel.

lurkingknight · October 13th, 2015, 23:55

Quote:

Originally Posted by SuperHog

What were the diameters of the defective bb's?

Most magazines are so loose it shouldn't jam them. Also I run barrels with ID of 6.05 to 6.10. So unless these bb's are so big, no wonder they jammed and how could the company ship them knowing they are so far off? The other big question, do the molds not determine the final diameter of the bb's, plus or minus tolerance?

not sure, I didn't have any exemplars to measure against when I started digging deeper into my feeding issue. By the time I started measuring them, I had run out of good rounds. I personally felt the bad rounds were too small since the only size relation I could test was with another brand that did feed properly but stealth is saying they were large. He would've heard more from the manufacturer.

For a 450fps dmr, a .32 or a .36 is what I would choose. The bioshot .32s actually weigh closer to .31 if you have a scale that's precise enough to measure.
.

Stealth · October 15th, 2015, 15:48

Quote:

Originally Posted by KenTsui

How long ago was this? Is there a way to tell which batch I got?

If it's the samples you got from me they are before the defective batch.

Stealth · October 15th, 2015, 15:49

Quote:

Originally Posted by lurkingknight

not sure, I didn't have any exemplars to measure against when I started digging deeper into my feeding issue. By the time I started measuring them, I had run out of good rounds. I personally felt the bad rounds were too small since the only size relation I could test was with another brand that did feed properly but stealth is saying they were large. He would've heard more from the manufacturer.

For a 450fps dmr, a .32 or a .36 is what I would choose. The bioshot .32s actually weigh closer to .31 if you have a scale that's precise enough to measure.
.

Potentially they may be too small. I can take a look when I'm home.

They fired fine with excellent trajectory as long as you used highcaps but they would jam up in midcaps

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 12th, 2015, 05:18	#1
hyz980517 Trader rating Join Date: Feb 2015	good .32 .36 bbs? hi guys, any suggestions on some good brand .32 .36 bbs? easy to get is also very important(canadian retailer if possible), i live in great vancouver area. bio or non-bios are both fine. white color preferred. thx!

October 12th, 2015, 21:26	#5
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	I use bioshot .32s without issue. There was a batch that were bad but it seems to be taken care of now. I find they perform a bit better than the madbull .32s But the polish on the mabulls is a bit better, while the bioshots fly in a tighter cone. The issue I was having was non feeding in aeg midcaps, but they worked fine in pistol, highcap or sniper mags. I had about 10 bags of good rounds, then a restock that was recalled was bad, all those bags should be off the market. The newest batch at airsoftstore is working great. The weight on the .32 bioshots is closer to .31. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; October 13th, 2015 at 00:19..

October 13th, 2015, 17:03	#8
Stryker Trader rating Join Date: Dec 2001 Location: 'A' (eh!) land	Elite Force makes BIO's 0.32 weight bb's! __________________ MODT - tu fui ego eris

October 12th, 2015, 12:00	#2
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	I didn't think anyone in BC was allowed to use non-bio? There aren't any BBs over .30 that are truly eco-friendly

October 12th, 2015, 14:48	#3
cetane Trader rating Join Date: Jun 2010 Location: Markham & Stouffville - Ontario - Canada	There was a thread started on airsoft mechanics about the new vfc ones... Curious as to how they will be...? https://scontent-sea1-1.xx.fbcdn.net...aa&oe=56A7B5E7 https://www.facebook.com/WGCShop/pho...type=3&theater http://www.airsoftmechanics.com/inde...23.0;topicseen

October 13th, 2015, 00:00	#6
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Just to clarify what Lurkingknight has said, I had a batch of 0.32g Bioshots which were slightly larger in diameter and would jam up in double-stack midcaps. That batch has been recalled and destroyed, so any new bags you grab from me will feed properly and flawlessly. I haven't had any complaints since.

October 13th, 2015, 18:28	#10
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	what gun are you putting these in? __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

October 13th, 2015, 20:24	#11
SuperHog Trader rating Join Date: Jul 2011 Location: Toronto, Ontario	What were the diameters of the defective bb's? Most magazines are so loose it shouldn't jam them. Also I run barrels with ID of 6.05 to 6.10. So unless these bb's are so big, no wonder they jammed and how could the company ship them knowing they are so far off? The other big question, do the molds not determine the final diameter of the bb's, plus or minus tolerance? Last edited by SuperHog; October 13th, 2015 at 20:48..

good .32 .36 bbs?

Airsoft Guns Discussion