|
|
|
August 28th, 2015, 07:30
|
#196 | |
|
Quote:
__________________
aka Uncle 
|
|
|
|
|
August 29th, 2015, 16:54
|
#197 |
|
can you please be more specific? witch one will fit the cam870? just the top part that you can slide out...
|
|
|
|
|
|
August 29th, 2015, 17:30
|
#198 | |
|
|
Quote:
http://www.aps-concept.com/index.php...mation/contact
__________________
aka Uncle
|
|
|
|
|
|
August 30th, 2015, 11:44
|
#199 |
|
thanks, im looking at some models at brownells now and im uncertain if the height of the sight is 0,343 or 0,375 inches, could you measure it for me n_force? just the top bit...
http://www.brownells-sverige.se/epag...ucts/962564420 |
|
|
|
|
|
August 30th, 2015, 18:31
|
#200 | |
|
|
0.375 the whole height, 0.300 is just the sight.
Quote:
__________________
aka Uncle
Last edited by N_Force; August 30th, 2015 at 18:50.. |
|
|
|
|
|
August 30th, 2015, 19:14
|
#201 |
|
Thanks
 i just ordered it. 0.375 should work. I will get back with the result.
|
|
|
|
|
|
September 18th, 2015, 14:26
|
#202 |
|
I finally received my Cam870! I got the pistol grip model with 14" barrel.
I removed the orange tip last night, and under the orange tip is a treaded muzzle. The 14" barrel is threaded. I also measured the barrel and the total length when removed is 14" but if you mearure the barrel length from the breach while installed its only about 13.5" Not sure what furniture im going to us on my gun, its needs new furniture though for sure! I started to modify a beneli type stock from a double eagle airsoft but looks like the stock is a little big where it meets the receiver, can probably get it to work but it wont be flush with receiver so doubt ill use it. Since the barrel has the thread im thinking I will have to add the 2" breach, and a +1 extension tube .... anyone know for sure if the extension tube will be flush length wise with the 2" breacher? I dont want to have my mag tube sticking out past the barrel or breacher. Also if I use the +1 will I need a new mag tube spring? Oh, also ... my mag tube holds 5 shells, not 4 as specified? I havent shot my cam870 yet but have cycled it and have got jams quit a bit just from cycling it, I got jams loading 1 into the chamber and 4 into the tube as well as when I loaded 1 into the chamber and 5 into the tube. I will post some pics when I et a chance. |
|
|
|
|
|
September 22nd, 2015, 02:54
|
#203 |
|
Has anyone tried the competition trigger group? Is it all steel, or does it just have the Titanium nitride coated, stainless steel parts installed.
|
|
|
|
|
|
September 22nd, 2015, 09:36
|
#204 |
|
I didn't tried it, but the stock trigger group is all steel.
__________________
WE M14 GHK AKMS APS 870 |
|
|
|
|
|
September 23rd, 2015, 01:25
|
#205 |
|
Can someone tell me exactly how much length the 2" breacher will add to barrel length when installed?? ... and exactly how much length the +1 mag extension will add to the mag tube when installed??
Trying to figure out how my 14" barreled Cam870 would look with the 2" breacher and +1 mag extension installed. My Cam870 14" barrel came threaded, and the gun is also a 5 + 1 shot. |
|
|
|
|
|
September 23rd, 2015, 01:36
|
#206 | |
|
Quote:
|
|
|
|
|
|
September 23rd, 2015, 02:32
|
#207 |
|
No ...
2" breacher on 14" barrel I doubt is going to be 16" due to the threads ... trying to figure out exactly how much added length the 2" breacher would actually add to the barrel (any barrel) Also needing to know how much length the +1 mag extension will add ... I dont want to buy the 2" breacher and the +1 mag extension to find out after install that the +1 mag extension sticks out past the 2" breacher on my 14" barrel |
|
|
|
|
|
September 23rd, 2015, 09:17
|
#208 |
|
|
Check post #104 see if you have your answer.
__________________
aka Uncle
|
|
|
|
|
September 23rd, 2015, 21:17
|
#209 |
|
N_Force I saw post #104 and by that post I can see that its very close but I wasnt sure since you were unable to screw the 2" breacher on to your 14" barrel.
I was hoping you could check it out a little closer or check measurments |
|
|
|
|
|
September 24th, 2015, 22:48
|
#210 |
|
|
This is breaches barrel and end cap. Would it help?
__________________
aka Uncle
Last edited by N_Force; September 24th, 2015 at 22:51.. |
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
