TM M92F BB Rolling out

cav. · May 6th, 2014, 15:08

Hay guys, I have a M92F with Guarder upgrades, a hammer spring and a PDI piston head upgrade from stock. My issue with the gun is that sometimes bb rolls out, or double shoot. Once in awhile it kind of almost goes auto? For the Guarder sldie upgrade, you're suppose to modify this part:

I didnt modify the part shown...not sure if that would affect it?

cav. · May 6th, 2014, 17:10

Huh strange, it seems it was the 150% spring causing the problem. I guess when the slide racks bad, the force going back to the front must lodge the BB a little further up causing the BB to go over the hop-up.

Switched back to the stock spring and the slide has a hard time locking back with an empty mag due to the slide being heavier

Now what can I do to get the 150% working without it pushing the BB to far out? Should I sand the nozzle a wee bit, or cut the spring a little?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 6th, 2014, 15:08	#1
cav. Trader rating Join Date: Mar 2013 Location: Etobicoke, Ontario	TM M92F BB Rolling out Hay guys, I have a M92F with Guarder upgrades, a hammer spring and a PDI piston head upgrade from stock. My issue with the gun is that sometimes bb rolls out, or double shoot. Once in awhile it kind of almost goes auto? For the Guarder sldie upgrade, you're suppose to modify this part: I didnt modify the part shown...not sure if that would affect it? __________________ Red Miao Airsoft Last edited by cav.; May 6th, 2014 at 17:53..

May 6th, 2014, 17:10	#2
cav. Trader rating Join Date: Mar 2013 Location: Etobicoke, Ontario	Huh strange, it seems it was the 150% spring causing the problem. I guess when the slide racks bad, the force going back to the front must lodge the BB a little further up causing the BB to go over the hop-up. Switched back to the stock spring and the slide has a hard time locking back with an empty mag due to the slide being heavier Now what can I do to get the 150% working without it pushing the BB to far out? Should I sand the nozzle a wee bit, or cut the spring a little? __________________ Red Miao Airsoft Last edited by cav.; May 6th, 2014 at 17:53..

TM M92F BB Rolling out

Doctor's Corner