|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 20th, 2014, 20:10
|
#1 |
|
Western Arms 1911 not blowing back far enough
WA 1911 Hi capa running on propane w/ silicone oil added
Only about every other shot will actually load the next BB because the slide doesn't go all the way back. Any ideas? |
|
|
|
March 20th, 2014, 20:40
|
#2 |
|
Did you try lubing the slide a bit?
|
|
|
|
|
|
March 20th, 2014, 22:52
|
#3 |
|
Banned
|
try using duster gas
|
|
|
|
|
March 20th, 2014, 23:28
|
#4 |
|
You may have a weak hammer spring or the flow valve on the mag is gummed up. Try cleaning the flow valve on the mag and give it a drop of oil. If that fails, then the issue lies in the gun.
__________________
Please email me as I'm not on ASC too often.  Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
|
|
|
March 21st, 2014, 00:22
|
#5 |
|
|
At times it will not blow back at all, but it will fire the bb properly.
Any metal lubricant good for all the moving parts in the slide? Last edited by DeWee; March 21st, 2014 at 10:16.. |
|
|
|
|
March 21st, 2014, 01:55
|
#6 |
|
|
Use silicone oil or grease for all moving parts. But if you're very careful, lithium grease is good on moving metal parts. Don't get it on the rubber.
__________________
Please email me as I'm not on ASC too often. Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
