|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 4th, 2012, 12:35
|
#1 |
|
Question about Ares WA2000 Upgrades
Hey all, i have recently acquired a Ares WA2000 sniper and am going to be looking at doing internal upgrades with it. A tightbore barrel and i know the inner for this one is 500mm so i was thinking of doing one of the 554mm barrel and add a suppressor on the end.
Just wondering if anyone has opinions of what VSR10 parts would be best suited for this rifle. Any help would be greatly appreciated as im not familiar with airsoft internals. thanks alot in advance, Brad
__________________
Brad "Tiny" Middel 
Last edited by likestoshootppl; February 4th, 2012 at 12:44.. |
|
|
|
February 6th, 2012, 15:25
|
#2 |
|
|
Ok guys, I've been doing a bunch of searching for inner barrels at 500mm that will fit a vsr and there arnt any. lol. so that being said, would i be better to buy a 435mm EDGI (80 bucks) and have it shorter inside the gun or to buy a PDI 554mm (190 bucks) and either trim it down or figure out some way to put a suppressor on it?
i know the longer pdi will probably be the best option i just don't know if its worth or justifiable for the 110 bucks extra. some knowledgeable opinions would really be welcomed
__________________
Brad "Tiny" Middel
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
