This is the KJ 10/22 thread

Strelok · August 19th, 2011, 20:23

A-derp.

Got a stock on it, finally. But it'll be temp unless I can fix up some 'mistakes' i've made whilst dremeling and sanding, lol.

Aaanyway, the whole cycling thing seems to be an on/off occurance. Just started firing it with this stock fitted and it seems to be fine... Hm, I'm curious, would overtightening the screws have anything to do with it possibly? I still have that damn bolt-lock problem and the mag is seated properly.

Rob121 · August 20th, 2011, 11:42

Thanks for the help with how to fix the mags, they are all working now. Has anybody had problems with the hop up not working? Every few games I have to take apart my gun and put the hop up back together.

Hurley895 · August 20th, 2011, 12:09

I read once the hop up does not like cheap ammo...but that's all aitrsoft guns.

Styrak · August 20th, 2011, 12:27

Quote:

Originally Posted by Rob121

Thanks for the help with how to fix the mags, they are all working now. Has anybody had problems with the hop up not working? Every few games I have to take apart my gun and put the hop up back together.

I have this problem and I'm using 0.40's. I don't know if the hopup is getting greasy, or just getting worn down by BB's or what. Haven't run it for any extended length of time with 0.28's though, but I could try that and see what happens. It seems it can have HUGE overhop if you want it to with 0.25's so I don't think 0.28's would ever have the same problem. It's just with those really heavy 0.40's.

What are you running in yours?

Rob121 · August 20th, 2011, 12:36

I usually run .25 or .28 in it. I find that sometimes the hop up does not work at all.

I just took the gun apart and back together to set the hop up and gamed it today. The hop up did not work at all again. Does anybody know what else I can do to make the hop up work?

Viperfish · August 25th, 2011, 01:01

Go with the RA Tech hopup rubber, its alot harder and has a toothed bucking. also insure there is no oil on your hopup.

Styrak · August 25th, 2011, 02:03

Quote:

Originally Posted by Viperfish

Go with the RA Tech hopup rubber, its alot harder and has a toothed bucking. also insure there is no oil on your hopup.

Yes, wash the hopup rubber in soapy water.

Strelok · August 25th, 2011, 02:08

Anyone else have trouble with a sticky trigger?

I have to flick the trigger to shoot in rapid succession. If I pull it normally, it won't reset.

Oh well.

Rob121 · August 25th, 2011, 20:31

I have washed it out and it still seems to be doing the same thing, even with the screw down fully the hop up does not seem to work.

Strelok · August 26th, 2011, 00:30

Alright... Turns out my KJ is missing a screw. I was just firing it, heard a click and a spring rolled out and then got lost... I found out its that little pin inside the triggerguard behind the trigger.

Now thats all gone... Joy.

Anyone know if getting replacement KJ parts is easy at all? Goddamnit I hope I can get this fixed before sept 11.

D.Kovacs · August 26th, 2011, 20:20

Talked to Amos? He has some KJ an KWA parts on order, might have what you need.

Viperfish · September 7th, 2011, 19:00

Alright so here is an updated pic of my .22 as she sits now.

Got afew good games out of her now, the new RAtech hopup is now nicely worn in and working wonders. With propane she shoots 350 with .28s at about 1.2 Joules. on duster she is around 420 on duster with .2s.

I will be switching over to the long mags shortly at which point i will consider her a 9mm take-down rifle.

The silencer does reduce the muzzle report however as most of the noise does come out of the ejection port it really only helps with the longer distance outdoor shooting. I made the silencer out of a broken Big Dragon tracer unit.

I will start fiddling with the bolt components next.

Strelok · September 7th, 2011, 19:07

Has anyone been having any issues with their bolt locking back every odd few shots? Yet another problem i've been ahving with mine

Viperfish · September 7th, 2011, 19:29

Quote:

Originally Posted by Strelok

Has anyone been having any issues with their bolt locking back every odd few shots? Yet another problem i've been ahving with mine

it happens every so often with propane. duster rarely gives this issue. Its just bounceback from the blowback. Think of it as a stoppage. A real 10/22 will have lots of them it you use the shitty 500round saver boxes.

Styrak · September 8th, 2011, 00:39

Quote:

Originally Posted by Viperfish

With propane she shoots 350 with .28s at about 1.2 Joules.

That's 1.6 joules, not 1.2!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 20th, 2011, 12:36	#125
Rob121 Trader rating Join Date: May 2010 Location: Niagara	I usually run .25 or .28 in it. I find that sometimes the hop up does not work at all. I just took the gun apart and back together to set the hop up and gamed it today. The hop up did not work at all again. Does anybody know what else I can do to make the hop up work? Last edited by Rob121; August 21st, 2011 at 19:07.. Reason: Update to problem

August 19th, 2011, 20:23	#121
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	A-derp. Got a stock on it, finally. But it'll be temp unless I can fix up some 'mistakes' i've made whilst dremeling and sanding, lol. Aaanyway, the whole cycling thing seems to be an on/off occurance. Just started firing it with this stock fitted and it seems to be fine... Hm, I'm curious, would overtightening the screws have anything to do with it possibly? I still have that damn bolt-lock problem and the mag is seated properly.

August 20th, 2011, 11:42	#122
Rob121 Trader rating Join Date: May 2010 Location: Niagara	Thanks for the help with how to fix the mags, they are all working now. Has anybody had problems with the hop up not working? Every few games I have to take apart my gun and put the hop up back together.

August 20th, 2011, 12:09	#123
Hurley895 The Costco Kid Trader rating Join Date: Jul 2010 Location: St. John's NF	I read once the hop up does not like cheap ammo...but that's all aitrsoft guns.

August 25th, 2011, 02:08	#128
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Anyone else have trouble with a sticky trigger? I have to flick the trigger to shoot in rapid succession. If I pull it normally, it won't reset. Oh well.

August 25th, 2011, 20:31	#129
Rob121 Trader rating Join Date: May 2010 Location: Niagara	I have washed it out and it still seems to be doing the same thing, even with the screw down fully the hop up does not seem to work.

August 26th, 2011, 00:30	#130
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Alright... Turns out my KJ is missing a screw. I was just firing it, heard a click and a spring rolled out and then got lost... I found out its that little pin inside the triggerguard behind the trigger. Now thats all gone... Joy. Anyone know if getting replacement KJ parts is easy at all? Goddamnit I hope I can get this fixed before sept 11.

August 26th, 2011, 20:20	#131
D.Kovacs Trader rating Join Date: Jun 2009 Location: Winnipeg	Talked to Amos? He has some KJ an KWA parts on order, might have what you need.

September 7th, 2011, 19:07	#133
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Has anyone been having any issues with their bolt locking back every odd few shots? Yet another problem i've been ahving with mine

This is the KJ 10/22 thread

Airsoft Guns Discussion