G&P stock gears

[yerfdoggnahc]

I'm trying to pull a PDI 170% with a turbo motor, would stock G&P gears do the job? If not, what gears do you recommend (Systema and Prommy gears are way too expensive for me).

[iKliiu]

There has been reports of G&P gears snapping near the axle quite often. Try SHS gears for cheap prices.

[HKGhost]

If you're trying to pull a heavy spring, a high torque motor is what you need and not a turbo. High torque gears alone can only help so much but it's better than stock. Get a good high torque motor (not System) and a big battery or lipo should be enough to pull that spring with stock gears.

[yerfdoggnahc]

Originally Posted by HKGhost

If you're trying to pull a heavy spring, a high torque motor is what you need and not a turbo. High torque gears alone can only help so much but it's better than stock. Get a good high torque motor (not System) and a big battery or lipo should be enough to pull that spring with stock gears.

DO you think a G&P M160 turbo charger , Systema standard ratio gears and a PDI 170% would work? btw, i'm using a intellect 9.6v 3600mah nimh