|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
July 14th, 2011, 21:17 | #1 |
Famas Gearbox Issue
Hi everyone! I come with a question that i need answered.
My Famas doesnt fire anymore.... Here is the run down off events: Sat for about 4 months over winter. Charged the 8.4V battery up in installed to the rilfe. Turn her on and nothing happens.... I hurd a little buzzing noise inside the gearbox area. So i hemmed and hawed if i should open up the gearbox....I did. I checked all the gears,piston,shims,and greased areas and they all checked out. The motor seems to be kinda funny tho. You cant spin it really easy. I pulled the motor right out of there and bench tested it with 8.4v straight to it and all it does is buzz... Notes: The rilfe is a TM Famas SV STOCK! No mods what so ever!!! Just a scope Never stored with the battery is it. Zero corrotion on anything Rifle is in like new condition. So in saying all the what ya think. Cooked motor after 4 months of not using it? Thanks. |
|
July 14th, 2011, 21:20 | #2 |
Official ASC Bladesmith
|
Almost read the title as FAMOUS gearbox issue.......
Motor sounds shot, and not in a good AEG way. |
July 14th, 2011, 21:27 | #3 |
Hmmm so you think the motor is cooked.
Now why the hell would the motor die when its not being used??? Now that is what gets me. I just dont understand that part. |
|
July 14th, 2011, 21:56 | #4 |
The motor is, essentially, an electromagnet turning on a central axis. If it's not turning, but your hearing a hum, then that means there's juice, but not enough to turn. A motor failing could be any number of things - old lubricants seizing up, bushings and/or brushes wearing out, carbon/oxidization buildup on brush contact points, gears locking/jamming, etc. Just replace the motor - nothing you can do unless you want to take it to an electrician.
|
|
July 14th, 2011, 22:22 | #5 |
LOL! Thanks for the great explanation slink182!
So now im going to order a new motor and see if that fixes me problem. Will up date when i get the motor in. Thanks! |
|
|
Bookmarks |
|
|