Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Upgrading the TM L96AWS

:

Upgrades & Modifications

Reply
 
Thread Tools
Old January 20th, 2010, 12:03   #1
Long_Bong
 
Long_Bong's Avatar
 
Join Date: Dec 2007
Location: Canada
Upgrading the TM L96AWS

Hi,

I m considering the TM L96 AWS and was wandering what would I need to do to crank it up to 450 fps with 0.2?

I m hoping to keep as much TM part as possible (assuming they are top of the line and will support 450 fps...)


Thanks for your advice
__________________
Long_Bong is offline   Reply With Quote
Old January 20th, 2010, 13:39   #2
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Japan
That's not really the way to go about upgrading a TM bolt action, because of Japanese law, these things are normally built to fail after you exceed 400 FPS.

However, PDI has a complete line of upgrades for the L96

http://www.x-fire.org/etop/tm_l96.html

I'd suggest the Palsonite VC cylinder set...

Oh.. it appears they don't have upgraded sears yet... Hrrrm... I'd keep it under 400 for now lol
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old January 20th, 2010, 13:41   #3
Rock 'N' Roll Outlaw
 
Rock 'N' Roll Outlaw's Avatar
 
Join Date: Oct 2007
Location: Mississauga, ON -- The Brotherhood Of Eternal Sleep
Doesn't it use VSR internals? If so then one could theoretically use sears designed for the VSR, along with most if not all other internal upgrades for a VSR.
__________________
My trust is in whiskey, in weed and in Slayer, its GODDAMN ELECTRIC - Pantera

Quote:
Originally Posted by Pliskin View Post
This is the equivalent to knocking on deaths door and blowing his head off with a shotgun.
Rock 'N' Roll Outlaw is offline   Reply With Quote
Old January 20th, 2010, 13:46   #4
Donster
 
Donster's Avatar
 
Join Date: Jul 2007
Location: GTA
Quote:
Originally Posted by Rock 'N' Roll Outlaw View Post
Doesn't it use VSR internals? If so then one could theoretically use sears designed for the VSR, along with most if not all other internal upgrades for a VSR.
no, they make TM L96 specific upgrades. You may be thinking of the Ares WA 2000, which is supposed to use TM VSR-10 internals.
Donster is offline   Reply With Quote
Old January 20th, 2010, 14:51   #5
hattrick
NAAZ's #1 fan!
 
hattrick's Avatar
 
Join Date: Aug 2005
Location: Toronto
Send a message via MSN to hattrick
I seem to recall seeing a rather expensive (around 200usd) upgrade kit for the TM l96 maybe on redwolf??


-alex
__________________
Quote:
Originally Posted by Brian McIlmoyle View Post
you are going to die..

maybe not from this .. and probably not today... but I assure you, you will die
hattrick is offline   Reply With Quote
Old January 20th, 2010, 15:42   #6
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Japan
Bah, Using any parts but PDI or some of the other smaller precision manufactured parts would be a huge waste.

If you're going to spend the money, you may aswell spend a little bit more to make it out-class most other rifles on the field
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old January 26th, 2010, 16:47   #7
Long_Bong
 
Long_Bong's Avatar
 
Join Date: Dec 2007
Location: Canada
Ok, going in with Amos selection of:

PDI Palsonite VC Cylinder set
PDI 2nd Sear
PDI slotted end screw
L96 130 (435 FPS)
TM L96 AWS 6.01 inner barrel
Firefly Hard Hop-up Rubber for Marui Hop system

In the TM L96,

Amos will gun doc it, I m curious to see how it turn out
__________________
Long_Bong is offline   Reply With Quote
Old May 31st, 2011, 15:57   #8
Ricochet
How much sand CAN you fit in your vagina!?
 
Join Date: Feb 2008
Location: North Delta, BC (Greater Vancouver)
Where can a guy acquire a TM L96 in Canada new? And How much?
Ricochet is offline   Reply With Quote
Old June 16th, 2011, 20:18   #9
the man behind the rifle
 
the man behind the rifle's Avatar
 
Join Date: May 2011
Location: montreal
Quote:
Originally Posted by Ricochet View Post
Where can a guy acquire a TM L96 in Canada new? And How much?
theres a million dollar question, i see all these post of tm aws and other rare guns for canada and i always wonder where people get them from. i got a tm vsr-10 of redwolf after an expensive shiping cost and seperating the gun into parts. even that was extremly lucky to have got accross the border
the man behind the rifle is offline   Reply With Quote
Old June 16th, 2011, 20:24   #10
Cactus-man
 
Cactus-man's Avatar
 
Join Date: Mar 2011
Location: Saint-Nicolas,Quebec
Send a message via MSN to Cactus-man Send a message via Skype™ to Cactus-man
Answer is Simple: AV

In My case I ain't AV'ed and I have beauty weapons that my own heart made out
__________________
Jean I has retired because of excessive beating and shooting, but his legacy will go on forever
Cactus-man is offline   Reply With Quote
Old June 16th, 2011, 20:59   #11
the man behind the rifle
 
the man behind the rifle's Avatar
 
Join Date: May 2011
Location: montreal
o
the man behind the rifle is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 05:40.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.