Problem with Windage/Elevation on Element See-More Sight

Short Round · May 10th, 2011, 01:08

Just got my Element C-More Sight (I believe it is this model: http://airsoft-club.com/shop/aiming-...ris-rail-black) and it works perfectly fine other then the fact that I cannot adjust the windage/elevation on the sight.

There is an Air/Up marking on the top of the sight behind the lens with a screw, for the elevation, however the screw will not budge.

There is also a screw which should adjust the windage on the side of the sight, however it does not change the positioning on the sight either.

Anyone got any advice for this problem?

Styrak · May 10th, 2011, 01:24

How did you test where it's positioned? Did you test fire, then change, then test fire?

ILLusion · May 10th, 2011, 01:32

Here's a dumb question, but did you unlock the adjustment screws first? There are two grub screws that lock the windage & adjustment screws to prevent loss of zero as you shoot. Trying to turn the adjustments without unlocking them first, can actually damage the screw or even break the sight altogether.

The manual shows which screws are the locks.

Short Round · May 10th, 2011, 01:38

I did not durp.

Un did aLl the screws, the so called marked elevation won't budge

THe_Silencer · May 10th, 2011, 02:57

Buy higer quality sights and not have to worry about such issues.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 10th, 2011, 01:08	#1
Short Round Najohn Trader rating Join Date: Aug 2009 Location: SkyDome	Problem with Windage/Elevation on Element See-More Sight Just got my Element C-More Sight (I believe it is this model: http://airsoft-club.com/shop/aiming-...ris-rail-black) and it works perfectly fine other then the fact that I cannot adjust the windage/elevation on the sight. There is an Air/Up marking on the top of the sight behind the lens with a screw, for the elevation, however the screw will not budge. There is also a screw which should adjust the windage on the side of the sight, however it does not change the positioning on the sight either. Anyone got any advice for this problem? __________________

May 10th, 2011, 01:24	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	How did you test where it's positioned? Did you test fire, then change, then test fire? __________________ Airsoft Sales and Repair/Upgrade Services

May 10th, 2011, 01:32	#3
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Here's a dumb question, but did you unlock the adjustment screws first? There are two grub screws that lock the windage & adjustment screws to prevent loss of zero as you shoot. Trying to turn the adjustments without unlocking them first, can actually damage the screw or even break the sight altogether. The manual shows which screws are the locks. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed Last edited by ILLusion; May 10th, 2011 at 01:35..

May 10th, 2011, 01:38	#4
Short Round Najohn Trader rating Join Date: Aug 2009 Location: SkyDome	I did not durp. Un did aLl the screws, the so called marked elevation won't budge Last edited by Short Round; May 10th, 2011 at 02:19..

May 10th, 2011, 02:57	#5
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	Buy higer quality sights and not have to worry about such issues. __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

Problem with Windage/Elevation on Element See-More Sight

Doctor's Corner