Modify V2 cylinder head

Eien · May 11th, 2010, 20:42

So I bought a Modify V2 cylinder head...but for some reason it's impossible to slide the tappet plate with the nozzle on... when I push it back it stays back.. now no matter how hard I lube it with cylinder grease.. it just won't go forward.. unless I force it forward..

Any suggestions? Should I use gear grease?

AngelusNex · May 11th, 2010, 20:44

O-ring inside the nozzle may be to large and gripping the cylinder head's nozzle too much.

Eien · May 11th, 2010, 21:31

Is it possible to remove the o-ring out of the nozzle and replace it with a smaller one? or I should just buy a modify nozzle...

AngelusNex · May 11th, 2010, 21:40

Should be possible. now finding one the perfect size will probably be more time/work then just buying a modify nozzle unless you happen to have a set of various sized O-rings.

Boyso · May 11th, 2010, 21:48

Are you using a Modify nozzle? My stock nozzle wouldn't slide well on my Modify Cylinder.

EDIT : Just read your 2nd post. Use a Modify nozzle :P

Airseal is good

HKGhost · May 11th, 2010, 22:02

are you sure it's not the tappet plate? It could be that the tappet plate is to wide in the mechbox and needs sanded down. Had this problem before.

Eien · May 11th, 2010, 22:09

Well.. I don't think it's the tappet plate... I tried it with my stock cylinder head and it works perfectly fine.

HKGhost · May 11th, 2010, 22:12

Then just try using a Modify one. I have tried using a different brand nozzle on a Modify cylinder head and didn't have any trouble. Just install piece by piece and closing up the MB after each install to narrow it down to find the problem.
P.S. does the nozzle fit and slide over the cylinder head easily?

Quote:

Originally Posted by Eien

Well.. I don't think it's the tappet plate... I tried it with my stock cylinder head and it works perfectly fine.

Eien · May 11th, 2010, 22:30

The nozzle fits but its freaking hard to slide over... I have to force it into it. I'll grab a modify m4 nozzle when I do a small order of parts... gonna get my ass raped if I order just one part :\

HKGhost · May 11th, 2010, 22:44

If it's hard to slide on then that nozzle is tapered inside. Try a different nozzle if you have but get a Modify one for sure.

audi_bhoy · May 12th, 2010, 18:57

Order from Airsoft Parts, and ask it to be shipped via lettermail instead, of course it will not be insured, but you will save the 10$ flat rate shipping.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 11th, 2010, 20:42	#1
Eien Trader rating Join Date: Dec 2009 Location: Toronto, Ontario	Modify V2 cylinder head So I bought a Modify V2 cylinder head...but for some reason it's impossible to slide the tappet plate with the nozzle on... when I push it back it stays back.. now no matter how hard I lube it with cylinder grease.. it just won't go forward.. unless I force it forward.. Any suggestions? Should I use gear grease?

May 11th, 2010, 21:48	#5
Boyso a.k.a. LastSpartan Trader rating Join Date: Jul 2009 Location: Québec city	Are you using a Modify nozzle? My stock nozzle wouldn't slide well on my Modify Cylinder. EDIT : Just read your 2nd post. Use a Modify nozzle :P Airseal is good __________________ NEW BACON FOR SALE! "WHEN I DIE BURY ME UPSIDE DOWN SO THE WORLD CAN KISS MY ASS" -Platoon

May 11th, 2010, 22:02	#6
HKGhost Trader rating Join Date: Nov 2009 Location: Mississauga, ON	are you sure it's not the tappet plate? It could be that the tappet plate is to wide in the mechbox and needs sanded down. Had this problem before. __________________ Please email me as I'm not on ASC too often. Custom Build \| Upgrades \| Repairs \| Maintenance Contact: ghostgunwork@gmail.com / Private Message

May 11th, 2010, 20:44	#2
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	O-ring inside the nozzle may be to large and gripping the cylinder head's nozzle too much.

May 11th, 2010, 21:31	#3
Eien Trader rating Join Date: Dec 2009 Location: Toronto, Ontario	Is it possible to remove the o-ring out of the nozzle and replace it with a smaller one? or I should just buy a modify nozzle...

May 11th, 2010, 21:40	#4
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	Should be possible. now finding one the perfect size will probably be more time/work then just buying a modify nozzle unless you happen to have a set of various sized O-rings.

May 11th, 2010, 22:09	#7
Eien Trader rating Join Date: Dec 2009 Location: Toronto, Ontario	Well.. I don't think it's the tappet plate... I tried it with my stock cylinder head and it works perfectly fine.

May 11th, 2010, 22:30	#9
Eien Trader rating Join Date: Dec 2009 Location: Toronto, Ontario	The nozzle fits but its freaking hard to slide over... I have to force it into it. I'll grab a modify m4 nozzle when I do a small order of parts... gonna get my ass raped if I order just one part :\

May 11th, 2010, 22:44	#10
HKGhost Trader rating Join Date: Nov 2009 Location: Mississauga, ON	If it's hard to slide on then that nozzle is tapered inside. Try a different nozzle if you have but get a Modify one for sure. __________________ Please email me as I'm not on ASC too often. Custom Build \| Upgrades \| Repairs \| Maintenance Contact: ghostgunwork@gmail.com / Private Message

May 12th, 2010, 18:57	#11
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Order from Airsoft Parts, and ask it to be shipped via lettermail instead, of course it will not be insured, but you will save the 10$ flat rate shipping.

Modify V2 cylinder head

Upgrades & Modifications