![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#16 |
Loves Furries
|
I dont believe those will fit on the kraken unless you instead the mounting bracket.
__________________
![]() If ASC were real life, there would be no Chuck Norris, only CDN_Stalker MANITOBA IVAN |
![]() |
![]() |
![]() |
#17 |
No optics will fit a Kraken unless you install some form of mounting hardwear. :\
|
|
![]() |
![]() |
![]() |
#18 |
Attaching the scope plate would probably damage the plastic receiver of the Kraken. I wouldn't recommend going that route.
__________________
![]() Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
![]() |
![]() |
![]() |
#19 |
a.k.a. greenpunk_182
|
+1 on not having magnification that far away from your face.
Try a more open red dot like the rail mounted doc sight that RM suggested or something like this http://www.airsoftparts.ca/store2/in...oducts_id=1038 can be mounted directly on the rail you have. It's more open and won't obstruct your field of view. |
![]() |
![]() |
![]() |
#20 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
I hate the look of those types of open red dots, Greenpunk.
I used my freinds on the gun, and just felt that it was too weird for my AK. I love the look of the kobra, but too bad its not availiable in a rail mountable version... I'm still stuck deciding. ugh
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. |
![]() |
![]() |
![]() |
#21 |
I got one of those tasco red dots at walmart for my kraken and it get the job done
__________________
![]() |
|
![]() |
![]() |
![]() |
#22 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
What about this red dot? I've seen these (or one very similar to it) on some AK's.
http://www.dealextreme.com/details.dx/sku.21959 Its tiny though. Jeez. Or, instead of a reddot, I should look for some weaver rail iron sights. hahaha
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. |
![]() |
![]() |
![]() |
#23 | |
Do a search on Google for "AK irondot"...
__________________
Quote:
|
||
![]() |
![]() |
![]() |
#24 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
Yea, Skru. Thats the one I was looking at. Dealextreme has a cheap clone of it. Yet, I'm unsure of the irondot. It seems to be pretty damn small. (Like, small diameter for objective/viewing.)
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. |
![]() |
![]() |
![]() |
#25 |
a.k.a. flamethis
|
Man that Irondot is not cheap.. $300 for a sight.. maybe for RS but not airsoft.
|
![]() |
![]() |
![]() |
#26 |
http://www.pbase.com/racingmaniac/image/116563944
Irondot...it is small, I'd think the height is about perfect for the sight height of AK though.... A rail mounted docter copy by king arms or something will be close enough... Last edited by RacingManiac; May 7th, 2010 at 01:42.. |
|
![]() |
![]() |
![]() |
#27 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
Dealextreme has one for cheap. Cheap enough that I could buy it, and if I dont like it, sell it for even cheaper. It looks almost identical, it just doesnt come with the plastic shell that goes outside of it or whatever that was ontop of it in the picture you posted, RacingManiac.
Unfortunately, my rail does not line up with my sights. Its the rail pictured here: http://www.socomtactical.net/images/...-mount-top.jpg I can actually see the front sight if I look under the rail...
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. |
![]() |
![]() |
![]() |
#28 |
I thought its actually a railed forearm or something. You might be able to mount magnified optic on that if you mount it far enough back.
The shell(aluminum actually) is what makes it an "irondot", its a Larue mount and protective housing around the normally somewhat flimsy fast-dot sight. |
|
![]() |
![]() |
![]() |
#29 |
I have been going through the whole "what rail will work" thing with my AK. I tried the one you have pictured above and found although it looked real nice as a scope mount it still was to far forward. I ended up getting one from Eb airsoft that goes from the rear site and attaches to the top mount on the butt stock. Sorry I don't know how to put up a link. I did have to dremel where it attaches to the butt stock because the angle is wrong but not much. The old rear site (the adjustable part) just twists off and this new rail goes in it's place and the top machine screw on the butt mount is replaced with a new longer 4 mm one and its on. If your battery goes up top you just take out the butt screw and the rail will lift up like it is hinged on the rear site. This rail even has it's own iron sites if you want to use them (much like the M4 style peep sites). Hope this is of some help. Really depends on you budget. This rail runs about $60.00 CAN, free shipping from these guys and about a week and a half to get to Ontario.
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |