mags for the AGM HK 416

iggim109 · November 7th, 2009, 02:55

Ok so i own AGM HK 416 and i have decided to buy 10 packs of 75 round of Pmag from ehobbyasia. So when i got the mags i fill them up with bbs and insert them into my HK 416. However it doesn't go all the way in and don't feed into rifle. can any one help me out here????

Dynamo · November 7th, 2009, 03:45

due to the lower angle of the mag well on the 416, the front of the Pmag catches on it.
the only real solution is to file down the fron inside edge (10-15mm square area, 3mm deep at the edge.) of the magwell. there isnt enough material on the front of the mag to file off, or you'll end up with a hole on the mag.

iggim109 · November 7th, 2009, 12:40

so then which brand of mag that works with my HK 416???

Conker · November 7th, 2009, 13:14

Any M4/M16 series mags that are NOT PMAGs should work.

iggim109 · November 7th, 2009, 20:22

alright then and i got one more question about mags. i was wondering that if m4 c-mag would work on my HK 416??

Dynamo · November 8th, 2009, 23:57

with the C-mag it's the same problem as the Pmags.

Spike · November 9th, 2009, 00:09

you could try KA mags. My classic army m4 had the same problem with pmags being too big, but I used KA mags for it now, and they work fine.

catilio · March 30th, 2010, 21:15

King Arms plastic midcaps work perfect in AGM HK416

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 7th, 2009, 02:55	#1
iggim109 Trader rating Join Date: Nov 2008 Location: coalhurst Ab	mags for the AGM HK 416 Ok so i own AGM HK 416 and i have decided to buy 10 packs of 75 round of Pmag from ehobbyasia. So when i got the mags i fill them up with bbs and insert them into my HK 416. However it doesn't go all the way in and don't feed into rifle. can any one help me out here???? __________________

November 7th, 2009, 03:45	#2
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	due to the lower angle of the mag well on the 416, the front of the Pmag catches on it. the only real solution is to file down the fron inside edge (10-15mm square area, 3mm deep at the edge.) of the magwell. there isnt enough material on the front of the mag to file off, or you'll end up with a hole on the mag. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.

November 7th, 2009, 12:40	#3
iggim109 Trader rating Join Date: Nov 2008 Location: coalhurst Ab	so then which brand of mag that works with my HK 416??? __________________

November 7th, 2009, 13:14	#4
Conker Trader rating Join Date: Jan 2007 Location: Canada / Ireland / USA	Any M4/M16 series mags that are NOT PMAGs should work. __________________ WTS: King Arms/Madbull Mk18 Mod1 - VFC Mk17 SCAR-H midcap mags, FDE - VFC Mk17 SCAR-H + PWS rail, FDE WTB/WTT: CSOR gear, BFG, Tyr, Crye, etc

November 7th, 2009, 20:22	#5
iggim109 Trader rating Join Date: Nov 2008 Location: coalhurst Ab	alright then and i got one more question about mags. i was wondering that if m4 c-mag would work on my HK 416?? __________________

November 8th, 2009, 23:57	#6
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	with the C-mag it's the same problem as the Pmags. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.

November 9th, 2009, 00:09	#7
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	you could try KA mags. My classic army m4 had the same problem with pmags being too big, but I used KA mags for it now, and they work fine.

March 30th, 2010, 21:15	#8
catilio Trader rating Join Date: Jan 2009	King Arms plastic midcaps work perfect in AGM HK416

mags for the AGM HK 416

Doctor's Corner