P90 Red Dot Sight

[fumoffu]

I have a echo1 e90 with rails. I install a decent red dot sight and calibrate it. Works really well. Also, the red dot on the p90 have a smaller fov.

Just get a p90 with rails


fumoffu

[Azathoth]

Originally Posted by kullwarrior

additional note:
The P90 RDS is actually call
Ring Sights MC-10-80

The optics falls under the ITAR export for US so basically you're gonna have to ask an American to risk himself exporting it out. (If he got caught he can be jailed)
The alternative is get a export permit which cause like $800USD for a $500 sight

In canada PS90 with the integrated sights are like $3400CDN, and don't forget the upper is the serialized part so good luck getting a sight off them.

Arent the optics made and available in europe thus allowing you to bypass ITAR?

[kullwarrior]

Originally Posted by Azathoth

Arent the optics made and available in europe thus allowing you to bypass ITAR?

If you can get them there of course, but during my 1 year window shopping there werent any place selling in Europe, the only place that had them was Gun broker (no longer) and impact guns.

[Kos-Mos]

Originally Posted by fumoffu

I have a echo1 e90 with rails. I install a decent red dot sight and calibrate it. Works really well. Also, the red dot on the p90 have a smaller fov.

Just get a p90 with rails


fumoffu

Both where TM P90s

That is the reason why you have to aim properly.

If you hold the rifle the way it is intended, you have no problem at all sighting the little aperture.

Smaller also means a way smaller reflection for the target to spot you and less reflections from ambient light to prevent you from seeing the target.

[DarkAngel]

I agree, the P90 RDS works fine. Ive used it countless times with no issues. I use the irons as well on the left side (im right handed) when i need snap reflex.

Those bitching about the rds just dont know how to use it >.>

I plan to pick up a RS one in the future (Cause i love the ring sights) and I use a First Factory Rail top if I ever want to mount a sight onto it (Though I rarely do as the RDS works beautifully). At least then you keep the look of the P90 without making it into the abortion more commonly known as the TR.

[Danke]

I don't thing the P90 dot is that bad per se but it is a generation removed from the level of current replica sights.

Maybe this a new job for Huang, a decent ring replica.

[ackme]

I think it's too low to view easily with goggles and it has a very narrow angle in which you can see it. It's What I found best is to take it off and drill two holes in the side and put a reflex sight in, it's a hundred times better. You have to get a reflex sight that has the left side part of the mount (from the back) removable and take that off. A standard reflex sight will fit without any further modification. I've attached a few pics to show what I'm talking about:

[Kos-Mos]

Originally Posted by ackme

I think it's too low to view easily with goggles and it has a very narrow angle in which you can see it. It's What I found best is to take it off and drill two holes in the side and put a reflex sight in, it's a hundred times better. You have to get a reflex sight that has the left side part of the mount (from the back) removable and take that off. A standard reflex sight will fit without any further modification. I've attached a few pics to show what I'm talking about:

That is actually looking decent. Ditch the M4 mag adapter and use oversized P90 mags like a real man though.

If you are not using a paintball mask, you should be able to sight properly. I have some Bolle T-800 and have no problem with it. Just like in real steel, you have to tuck the rifle hard on your shoulder and into your cheek to aim. If you don't the rifle flies around... Just shooting practice...