Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tanio Koba twist barrel - fps versus energy

:

Upgrades & Modifications

Reply
 
Thread Tools
Old March 23rd, 2010, 19:11   #16
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Illusion's already done extensive testing on the matter (so you don't have to), just take his word for it. Really, he DOES know what he's talking about lol
ThunderCactus is offline   Reply With Quote
Old March 23rd, 2010, 19:25   #17
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
So what's the consensus on this?

A TK Twist barrel on something like a Hi-Capa 5.1 should double effective range and give you tighter groupings (as it shoots at about 1J)?

I'm actually considering running a pistol as a "forward scout/recon" but I have to do a lot of research and info gathering before figuring out the setup I'm going to use and equipment that I need to buy.
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old March 23rd, 2010, 20:23   #18
Sportco
would-be wine thief
 
Sportco's Avatar
 
Join Date: Dec 2009
Location: St-Hilaire
From what I can make of it the tk twist barrel is simply a balanced system in which you you bleed hi pressure air around the BB. So the BB is basicly surfing the inside of an annular wave...

For this to work you have to factor in acceleration within the barrel lenght 0 to 300 fps.

Your first constant to control acceleration will be BB mass
So constant BB size and constant will be BB weight are essential...

Because lo weight BB = quick acceleration not enought pressure bleeding to create
the hi pressure buffer you need.

High weight BB = to slow acceleration to much bleeding PROBABLY turbulence and restriction upstream

Now that you have control over the mass you must accelerate you work on the bleeding with the crestes (or grooves) in the barrel. Same problem has with the BB weight.

To big to much bleed, to small not enought bleed to create buffer

The twist (again balanced according to speed/acceleration) in the barrel keeps the air from the high pressure wave plastered again the walls to restrain its effect (turbulence etc) on the BB.

So from knowing this I would have to guest that someowe... I japan 300 fps must be somewhat popular...

or that they could not manage tuning at higher FPS

((this is over simplied has there must be a lost to consider in actual overall barrel size to allow optimal lateral movement within the vortex..))

Regards,

Pete

So yes... only works with .20 BB and 330 FPS must be a Maximum... faster then that precision degradation must be.... horrible
__________________

Level 3 Directory assistance operator
Level 1 skapegoat
It ain't the years, it's the miles.

Last edited by Sportco; March 23rd, 2010 at 20:27.. Reason: addition...
Sportco is offline   Reply With Quote
Old March 23rd, 2010, 23:55   #19
Con Murder
 
Con Murder's Avatar
 
Join Date: May 2009
Location: Lethbridge Alberta Canada
I say put a TK twist on it if you play indoor or where there is no wind or bushes. With 330fps I had trouble shooting through small bushes with very little density, that and I could see the winds take the bb (especially .2) and now play between 360-370 fps. Honest though I feel a need for more range as some hot guns that are shorter barrel length outrange me.
__________________
Con Murder
Dark Rhino
L.A. Airsoft
Con Murder is offline   Reply With Quote
Old March 24th, 2010, 00:48   #20
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
I just ordered a Systema M100 Spring to put with a 509mm TK Twist into my M16, I was told about 350 Fps Maximum and according to 2004 spring chart, this would pull 360 new, so decreasing would have got me "in the zone". I'll make outdoor test once I get the chance to measure precisely while putting 280 FPS on .25 and after that with the new spring, to compare the grouping at equal distance and conditions.
audi_bhoy is offline   Reply With Quote
Old March 24th, 2010, 08:47   #21
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Quote:
Originally Posted by Con Murder View Post
I say put a TK twist on it if you play indoor or where there is no wind or bushes. With 330fps I had trouble shooting through small bushes with very little density, that and I could see the winds take the bb (especially .2) and now play between 360-370 fps. Honest though I feel a need for more range as some hot guns that are shorter barrel length outrange me.
Heavier BBs will fix those issues for you, minimum 0.25g, but 0.28g are better.

Quote:
Originally Posted by audi_bhoy View Post
I just ordered a Systema M100 Spring to put with a 509mm TK Twist into my M16, I was told about 350 Fps Maximum and according to 2004 spring chart, this would pull 360 new, so decreasing would have got me "in the zone". I'll make outdoor test once I get the chance to measure precisely while putting 280 FPS on .25 and after that with the new spring, to compare the grouping at equal distance and conditions.
You'll notice that the spring chart was done with an P90 (chosen for it's well sealing hop up unit) and there are also upgraded (for sealing and efficiency) parts in there, so the chart isn't 'perfect', even though it's well done. But ya, Modify 100 springs tend to sit guns around 360fps as well.

Last edited by CDN_Stalker; March 24th, 2010 at 08:52..
CDN_Stalker is offline   Reply With Quote
Old March 24th, 2010, 16:38   #22
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
Then it might just suit in as well, it is rated 365 on the chart, I've heard that max FPS with a TK twist was around 350, now there's proof that it suits best under 330, so I think I'll be in the optimum zone while I might have little air leaks, but I tried different nozzles and this one doesn't leak. Can't wait to see if I can reach a sniper-like grouping
audi_bhoy is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 19:38.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.