|
|
|
December 5th, 2008, 20:43
|
#16 |
|
I'll bring a couple, just in case I might need to replace this or want to put it on the SV...I'll give you and someone else who's interested......
They are only $30 bucks(for 5), I am sure you can probably order it in Canada... |
|
|
|
December 5th, 2008, 21:00
|
#17 |
|
Colour me interested.
|
|
|
|
|
|
December 5th, 2008, 21:18
|
#18 |
|
|
alright...they are yours(Endymion and Tys)....
|
|
|
|
|
January 31st, 2009, 00:51
|
#19 |
|
|
I'll the the pics speak for themselves....
        I tried a set of cocking handle that uses the mounting base for the Marui Bomar, but since I had the C-More mounted by a gunsmith before I got the cocking handle, the space underneath the C-more is not enough for the stock sight. I'll have to get another cocking handle(maybe the ProG4) that fits flush to the profile of the slide... The gun is not zeroed or tuned yet. Test fired today and chronoed 370fps using .20g and PDI 6.05 barrel. Will need a bit more fitting work to get the gun working well, and I'll probably cut down the stock sight base just to temperarily have a cover for the sight cutout... Current parts list: TM Hi-Capa 5.1 Base External: Airsoft Surgeon Government length SVI Frame ProG4/ILLusion Custom Limcat Phantera Hybrid slide(~4.7" length) ProG4/ILLusion Custom Limcat matching profile compensated hybrid barrel(.38 Super Hybrid Marking) Airsoft Surgeon Spur Hammer Nova Ambi-Safety, SVI style Nova Grip Safety, SVI Style Stock Marui Grip+TruGrip ProG4 STI 2 tone magwell. Nova Trigger 9Ball Extended Slide Catch C-More Seredipity 830 RDS Internal: ProG4/ILLusion Custom Lightweight BBU with O-Ring Airsoft Surgeon Reinforced Nozzle Airsoft Surgeon Sear, Valve Striker, Hammer Strut PDI 7" 6.05 Stainless Inner Barrel ProG4/ILLusion Custom Custom 2 piece Stainless Guiderod Guarder Recoil and Hammer Spring And now, a bit of racegun porn....    
|
|
|
|
|
January 31st, 2009, 02:21
|
#20 |
|
* AV revoked *
|
damn ! Did I told you that I hate you so much right now ?
__________________
 
|
|
|
|
|
January 31st, 2009, 04:21
|
#21 |
|
GBB Whisperer
|
What's going on with your mag base bumper? LOL.
Looking really nice, though. How is the slide functioning? Is it cycling well? |
|
|
|
|
January 31st, 2009, 04:22
|
#22 | |
|
awesome Race gun, I'm loving the comp.
__________________
Quote:
|
|
|
|
|
|
January 31st, 2009, 11:08
|
#23 |
|
|
the mag bumper is wrapped in electrical tape so they don't fall off on reloading. Don't feel like getting aluminum one on those...lol
It cycles surprisingly well for next to no work....but the nozzle is a bit tight working with SD O-ring atm, I'll try the AS O-ring next.... |
|
|
|
|
January 31st, 2009, 18:25
|
#24 |
|
GBB Whisperer
|
What output valves are you using?
|
|
|
|
|
January 31st, 2009, 20:15
|
#25 |
|
|
stock, but I actually have some 9balls coming....since it was the only ones instock at eHobby last week....
|
|
|
|
|
January 31st, 2009, 23:24
|
#26 |
|
RM - why don't you just mod the stock valves?
I'll do it for you if you want...then you can compare my high flow vs. NineBall. Just send them to me USPS. A little bubble wrap, a small envelope and a stamp. My modded stock vs. Tanio Koba (open)  ...put that in your chrono and smoke it
__________________
Props to Captian KK @ http://www.ProG4.com I RUV Hi-CAPA GASUBUROBAKKUGAN http://www.aaps-federation.org/index.html 
|
|
|
|
|
February 1st, 2009, 01:43
|
#27 |
|
|
I did actually before....I could probably give that a go still....
Couple more pics   Modded the stock rear sight base to sit under the C-more so that I have a cover for the top the BBU at the moment, ordered a left side cocking handle from ProG4 for future. The Airsoft Surgeon nozzle didn't work for too long, the spring tab broke off after 20 shots. Now I am using a SD Nozzle and AS Oring with the BBU/piston, but the FPS dropped because of that. Now I am at ~345fps. Have to try to improve the seal a bit....Got the sight somewhat zeroed enough, and thanks to the low-mounting C-more the process of getting used to using a RDS seems to be not so bad....also did some trigger tuning with the stock trigger loop, with some shimming with electrical tape I got to take out the slack in the trigger and with some leaf spring bending and disconnetor modding lowered the (perceived) trigger weight as well. Had to tune the SD nozzle BB-tip to get more consistent BB loading (was misloading) and add chamfer to the 2nd and 3rd lug get the slide not stick on return to battery. Now the gun seems to cycle pretty well, it has very light recoil and fast action.... Last edited by RacingManiac; February 1st, 2009 at 01:51.. |
|
|
|
|
February 1st, 2009, 02:11
|
#28 | |
|
NAAZ's #1 fan!
|
the4th, what kind of fsp do you get on those home made valves?
__________________
Quote:
|
|
|
|
|
|
February 1st, 2009, 04:08
|
#29 | |
|
GBB Whisperer
|
Quote:
CANCEL THAT ORDER AS SOON AS YOU CAN! Seriously... I have never been more disappointed with an aftermarket "upgrade" component before, especially from such a respected and renowned company. The 9ball "high flow" valves offer absolutely NO increase in performance whatsoever. If you shot 320fps before, you'll shoot 320fps after you install those valves. And those stupid ball bearings they include don't do squat either. All they do is get stuck in the cracks and crevices of your magazines and reduce your gas capacity. If I'd ever seen poor execution on a product before, this beat it.
__________________
 Advanced Airsoft Armaments and Enhancements Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed Last edited by ILLusion; February 1st, 2009 at 04:10.. |
|
|
|
|
|
February 1st, 2009, 11:30
|
#30 | |
|
Quote:
I SECOND this motion...listen to THE4thPOWER3, mod the stock valve or go with the TK. You've spent enough on the gun, why CHEAP out on 9ballers!
__________________
Kevorkian  I SUPPORT THE USE OF SILICA BB BASTARDS! |
|
|
|
|
  |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
