Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Whats Next? m4 vs acr vs sig 556

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old January 21st, 2012, 04:31   #16
Ninja_En_Short
 
Ninja_En_Short's Avatar
 
Join Date: Jul 2007
Location: France, Canada (Montréal)
Send a message via MSN to Ninja_En_Short
And stocks which are the highest volume of aftermarket parts sale, not a small thing
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes...
I can do a CTRL+ATL+DEL on your gun !

Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring)
Heavy custom builder (including painting)

Ninja_En_Short is offline   Reply With Quote
Old January 21st, 2012, 09:26   #17
Delta Charlie
 
Join Date: Feb 2011
Quote:
Originally Posted by Styrak View Post
Most decent AEG's have very similar accuracy and range.
So do you think that any of the guns that I chose would have the accuracy to become a dmr ?
Delta Charlie is offline   Reply With Quote
Old January 21st, 2012, 17:04   #18
Ninja_En_Short
 
Ninja_En_Short's Avatar
 
Join Date: Jul 2007
Location: France, Canada (Montréal)
Send a message via MSN to Ninja_En_Short
Accuracy is more about the internals actually, put a good barrel and hop up and any gun can become "suited" for DMR, but remember a "real" DMR gun is not supposed to be a gun with a 10/12" barrel.
A DMR should have a semi auto gun (at least, full auto is optional) with 14.5 (M4 length) or above (16 or 20").
Example : I've been using an SR25 (7.62x51 semi auto) with a 16" if I recall, great accuracy once modded and the length of the gun (with or without suppressor) never had been a hindrance.
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes...
I can do a CTRL+ATL+DEL on your gun !

Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring)
Heavy custom builder (including painting)

Ninja_En_Short is offline   Reply With Quote
Old January 21st, 2012, 21:15   #19
Delta Charlie
 
Join Date: Feb 2011
Question

Quote:
Originally Posted by Ninja_En_Short View Post
Accuracy is more about the internals actually, put a good barrel and hop up and any gun can become "suited" for DMR, but remember a "real" DMR gun is not supposed to be a gun with a 10/12" barrel.
A DMR should have a semi auto gun (at least, full auto is optional) with 14.5 (M4 length) or above (16 or 20").
Example : I've been using an SR25 (7.62x51 semi auto) with a 16" if I recall, great accuracy once modded and the length of the gun (with or without suppressor) never had been a hindrance.
Yeah it's funny cuz I actually have looked at certain sr-25 s and have seriously considered some of them, but a lot of them are quite pricey and again , they don't take m4 mags. I've also heard they're pretty heavy
Delta Charlie is offline   Reply With Quote
Old January 21st, 2012, 22:22   #20
Ninja_En_Short
 
Ninja_En_Short's Avatar
 
Join Date: Jul 2007
Location: France, Canada (Montréal)
Send a message via MSN to Ninja_En_Short
An assault rifle weighs an average of 3/3.5 kg without accessories but SR25 is not that much heavier than an M4 with a rail system (all equipped mine weighs about 5 kg) and after a few games or playing a bit with it at home you get used to the weight.
For the mags it may not be an issue considering two things : the amount you have and the way you play.
I have 4 Pmags (170 rounds, 30 more than the 5.56) and I mostly play real cap game which means I only have 20 round per mag so 80 in total and I don't need to reload much because as a DMR I have a role close to a sniper (difference is : much better rate of fire and I don't rearm everytime I shoot) which means I take my time aiming and only do semi auto.
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes...
I can do a CTRL+ATL+DEL on your gun !

Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring)
Heavy custom builder (including painting)

Ninja_En_Short is offline   Reply With Quote
Old January 22nd, 2012, 10:23   #21
Delta Charlie
 
Join Date: Feb 2011
Quote:
Originally Posted by Ninja_En_Short View Post
An assault rifle weighs an average of 3/3.5 kg without accessories but SR25 is not that much heavier than an M4 with a rail system (all equipped mine weighs about 5 kg) and after a few games or playing a bit with it at home you get used to the weight.
For the mags it may not be an issue considering two things : the amount you have and the way you play.
I have 4 Pmags (170 rounds, 30 more than the 5.56) and I mostly play real cap game which means I only have 20 round per mag so 80 in total and I don't need to reload much because as a DMR I have a role close to a sniper (difference is : much better rate of fire and I don't rearm everytime I shoot) which means I take my time aiming and only do semi auto.
Alright then, I may look into that. Dont suppose you'd beable to recommend any specific brand?
Delta Charlie is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 10:49.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.