Customizing MP5A4

gm_gunner · April 15th, 2008, 03:05

Hey there,

I've been slowly upgrading my MP5A4, and I picked up an RAS system from Mosquito Molds, it says on the markings that it can be used for MP5, HK94, and HK53A. The part number is 97198, and I'm just wondering if anyone out there knows what I have to do to fit it onto my gun? Here's a picture of the parts that I'm dealing with.

Thanks in advance guys!

GM_Gunner

Chrios · April 15th, 2008, 04:50

It just replaces the stock handguard, so it's not a hard swap at all, especially since all the wiring is in the back of the gun.

Alls you has to do is remove the pin (upper right corner) and it'll come off.
http://cdn-www.pbreview.com/productp...6&product=3723

After that just put the RIS on, replace the pin and you're good to go. Unless something needs to be dremeled, that's all there is to it, but I had an RIS kit on my TM mp5a4 before and it wasn't an issue.

It's a fun peice of kit...Good luck with it! Cheers,

edit: the picture won't display, so you'll have to click the link to see the picture. feh.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 15th, 2008, 03:05	#1
gm_gunner Trader rating Join Date: Oct 2005 Location: Prince George	Customizing MP5A4 Hey there, I've been slowly upgrading my MP5A4, and I picked up an RAS system from Mosquito Molds, it says on the markings that it can be used for MP5, HK94, and HK53A. The part number is 97198, and I'm just wondering if anyone out there knows what I have to do to fit it onto my gun? Here's a picture of the parts that I'm dealing with. Thanks in advance guys! GM_Gunner __________________ We use words like honor, code, loyalty...we use these words as the backbone to a life spent defending something. You use 'em as a punchline.

April 15th, 2008, 04:50	#2
Chrios Trader rating Join Date: Sep 2003	It just replaces the stock handguard, so it's not a hard swap at all, especially since all the wiring is in the back of the gun. Alls you has to do is remove the pin (upper right corner) and it'll come off. http://cdn-www.pbreview.com/productp...6&product=3723 After that just put the RIS on, replace the pin and you're good to go. Unless something needs to be dremeled, that's all there is to it, but I had an RIS kit on my TM mp5a4 before and it wasn't an issue. It's a fun peice of kit...Good luck with it! Cheers, edit: the picture won't display, so you'll have to click the link to see the picture. feh.

Customizing MP5A4

Doctor's Corner