Customizing MP5A4
 

Hey there,

I've been slowly upgrading my MP5A4, and I picked up an RAS system from Mosquito Molds, it says on the markings that it can be used for MP5, HK94, and HK53A. The part number is 97198, and I'm just wondering if anyone out there knows what I have to do to fit it onto my gun? Here's a picture of the parts that I'm dealing with.
http://img514.imageshack.us/img514/9...2255nh9.th.jpg

Thanks in advance guys!

GM_Gunner

It just replaces the stock handguard, so it's not a hard swap at all, especially since all the wiring is in the back of the gun.

Alls you has to do is remove the pin (upper right corner) and it'll come off.
http://cdn-www.pbreview.com/productp...6&product=3723

After that just put the RIS on, replace the pin and you're good to go. Unless something needs to be dremeled, that's all there is to it, but I had an RIS kit on my TM mp5a4 before and it wasn't an issue.

It's a fun peice of kit...Good luck with it! Cheers,

edit: the picture won't display, so you'll have to click the link to see the picture. feh.