Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   Kraken shooting to the left (https://airsoftcanada.com/showthread.php?t=56933)

Strelok April 14th, 2008 00:30

Kraken shooting to the left
 
Hey, a freind and I just got our Kraken AKs', I've noticed that they both shoot to the left (If you were to aim down the sights, the bbs would be shooting to the left sight post), exactly the same, Would this be a hopup problem or bad barrel?

Thanks!
________
No2 vaporizer

TokyoSeven April 14th, 2008 00:34

Id say hopup. Take it out reset it, replace it if possible. I hear its one of things that is recommened to be replaced when you purchase a kraken.

Strelok April 14th, 2008 00:45

Quote:

Originally Posted by TokyoSeven (Post 694024)
Id say hopup. Take it out reset it, replace it if possible. I hear its one of things that is recommened to be replaced when you purchase a kraken.

Thankyou Tokyo. And yeah, i've read the 'So, you've baught a kraken' thread on the Custom guns/modifications thread. I just need to finish upgrading my m24 before i start poking at this AK for parts. Just a piston and piston head to go... I'll do that tonight before I go to bed. See how that fares in the morning.

Will post results tommorow afternoon.
________
Corvette c4

~Bodkin~ April 14th, 2008 01:03

Umm, you might also wanna check and see if the front post of your sights is crooked. When I was at the store getting them, I noticed that on 90% of them the front sight was WAY off.

Strelok April 14th, 2008 01:20

Quote:

Originally Posted by ~Bodkin~ (Post 694033)
Umm, you might also wanna check and see if the front post of your sights is crooked. When I was at the store getting them, I noticed that on 90% of them the front sight was WAY off.

I dont think they are. But i'll check anyway, I just finished installing a guarder clear that i had left over from my m24, gonna see if its any improvement.

Thanks!
________
FREE VAPORIZER

tony123 April 14th, 2008 01:24

hmmm. i guess i will just have to stand infront of you to not get shot...

dodger_me April 14th, 2008 01:56

Everyone i know that has a kraken, the hole in the outer barrel the front site mounts into is off center

Strelok April 14th, 2008 02:07

Quote:

Originally Posted by dodger_me (Post 694060)
Everyone i know that has a kraken, the hole in the outer barrel the front site mounts into is off center

Alright, that doesnt matter much anyway, i'm making a longer outer barrel out of PVC for it.
________
latin girl Webcams

Bontic April 14th, 2008 02:26

Got my Kraken a couple of days ago. Mine seems to shoot dead center down the sights, until I turn the hop up on more than a quarter inch. However, even this amount of hop seemed to send the bbs around 150 feet before they dropped off. Since I wanted to experiment and see how far I could send them, I turned on some more hop, and the bbs started curving and following inconsistent paths. I had to cut short the session then, so I don't know if I can find that "happy place" again. Hopefully, or else the hop up has to go.

At around 25 feet I can send one bb straight into the back of the preceding one in semi auto, taking the gun off the target in between; so I think I can safely say the sights are mounted squarely in mine.

Does your outer barrel have a kind of ribbed finish? Is your hop up unit black?

Strelok April 14th, 2008 02:43

Quote:

Originally Posted by Bontic (Post 694076)
Got my Kraken a couple of days ago. Mine seems to shoot dead center down the sights, until I turn the hop up on more than a quarter inch. However, even this amount of hop seemed to send the bbs around 150 feet before they dropped off. Since I wanted to experiment and see how far I could send them, I turned on some more hop, and the bbs started curving and following inconsistent paths. I had to cut short the session then, so I don't know if I can find that "happy place" again. Hopefully, or else the hop up has to go.

At around 25 feet I can send one bb straight into the back of the preceding one in semi auto, taking the gun off the target in between; so I think I can safely say the sights are mounted squarely in mine.

Does your outer barrel have a kind of ribbed finish? Is your hop up unit black?

Yes, It was black, and was really sticky. I didnt like that one bit. so I tore that out, cleaned the barrel (outer area) from all the greasy shit and installed a guarder clear. Gonna see how that fares tommorow.
and my barrel is sorta ribbed, I dont like it,
________
Mercedes-benz w116 specifications


All times are GMT -4. The time now is 12:46.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.