|
|
|
April 27th, 2009, 20:10
|
#1 | |
|
just got this...good deal?
i just got this used KJW full metal M9 for $190 shipped. just wondering if it's a good price. most airsoft pistols i see on sites retail for around 200 with tinted grips so i assumed it was a good deal. here's what it includes:
Quote:
|
|
|
|
|
April 27th, 2009, 20:13
|
#2 |
|
Ditch the BB's for some Bastards, pick up some silicone oil for the magazines, and you should be ready to rock 'n roll.
__________________
  Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. |
|
|
|
|
April 27th, 2009, 20:16
|
#3 |
|
Nice Guy
|
Its only a good deal until you get it and check it out , you never know how well its been used or what problems will show up
|
|
|
|
|
April 27th, 2009, 20:22
|
#4 | |
|
|
yea definately not using those bb's. i have a bag of bastards lying around in my basement that are waiting to fly now that my rifle is out of commission.
 Quote:
|
|
|
|
|
|
April 27th, 2009, 20:23
|
#5 |
|
aka coachster
|
lube it up and charge the mags carefully. if they are dry you'll want to make sure the seals get some silicone in them or you'll blow them out with a full propane charge. seals are not easily found.
if you give it a half second fill and it starts to piss gas, I'd break it down and give the seals and orings a silly bath so that they get nice and fat. |
|
|
|
|
April 27th, 2009, 20:30
|
#6 | ||
|
asexual lumbricus terrestris
|
Good deal if that guy hadn't been using those... My personal rule is to not trust people on facebook, but who knows, it may well be in excellent condition.
__________________
Quote:
Quote:
|
||
|
|
|
|
April 27th, 2009, 20:40
|
#7 |
|
|
so, lube, charge slowly and carefully...lube seal and orings if dry or leaky. got it! thanks
 @yuhaoyang: i generally don't trust it either but i gave in this time. 
|
|
|
|
|
April 27th, 2009, 20:52
|
#8 | ||
|
asexual lumbricus terrestris
|
Probably a good idea to take everything in the slide assembly apart and give it a good wipe before you lube them as well to clean out the old dirty dusty lube =p.
__________________
Quote:
Quote:
|
||
|
|
|
|
April 27th, 2009, 21:38
|
#9 | |
|
Quote:
|
|
|
|
|
|
April 27th, 2009, 21:39
|
#10 |
|
O-rings are super easy to find for most pistols, especially KJ Beretta's.
Go to any home depot, or any hardware store really. Get o-rings that are used for taps, try and find the mid-small size. I cant remember the exact dimensions but I can find them for my TM 1911 MEU in o-ring kits by MOEN. KJ Beretta's are tanks. Just be careful with the right side safety. |
|
|
|
|
April 27th, 2009, 21:59
|
#11 | |
|
aka coachster
|
Quote:
|
|
|
|
|
|
April 27th, 2009, 22:01
|
#12 | |
|
Quote:
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
|
April 27th, 2009, 22:41
|
#13 |
|
|
The main seals on the bottom of the mags.
Never had any issues aside from a KJ 226 after replacing the stock ones after they go off. |
|
|
|
|
April 27th, 2009, 23:00
|
#14 |
|
aka coachster
|
The main seals are the ones that go dry and leak. sometimes can be averted by tightening the screw, but there's only so much to tighten.
|
|
|
|
|
April 27th, 2009, 23:55
|
#15 | |
|
Official ASC "Dumb Ass"
|
Quote:
__________________
|
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
