|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 29th, 2009, 20:47
|
#1 |
|
Tokyo Marui Desert Eagle GBB Mag Leaking!
Hi, I've never had any problems with my two year old Marui DE, until today when I filled the magazine, gas kept spewing out of the end close to where the bb's feed.
Does anyone know of a disassembly guide for the mag? I want to tighten the seals, but I have no idea where to start. |
|
|
|
|
July 29th, 2009, 20:52
|
#2 | |
|
Can't fix my own guns. Willing to fix yours.
|
you punch out the little pin near the feed lips, then pry out the top parts, theres the plastic feed lips and a rubber part, then theres the metal cap, they take a bit of coaxing to take out
__________________
 Words to live by Quote:
Last edited by Thenooblord; July 29th, 2009 at 22:30.. |
|
|
|
|
|
July 29th, 2009, 22:22
|
#3 |
|
Red Wine & Adderall
|
Seems like something maybe stuck open. Before you open anything up, grab some silicone (the gbb maintenance spray kind if you have it) and just give a shot on the back valve and a shot and one down that top port where the gas comes out. Make sure your mag is empty and using your thumb just press on the little button on the flow valve a few times to work the oil around, let it sit for a short while and do it again. Hopefully it should be better by then. If not then you can try taking things apart.
Not the most descriptive repair suggestion but I believe you get the idea.
__________________
 "Its only a little bit on fire" |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
