Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

AEG firing perfectly on semi auto, but has misfeeding problems on full auto

:

Doctor's Corner

Reply
 
Thread Tools
Old August 17th, 2008, 20:45   #1
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
AEG firing perfectly on semi auto, but has misfeeding problems on full auto

Hi, I recently got the SRC/ TSD Gen III hk 416... and it was working perfectly, on full and semi auto, but he hop up needed to be changed, because of the bad quality of the bucking... so I changed the hop up rubber, and it was shooting perfectly both on semi and full auto....
that was 5 days ago

today I tried it again and the gun was shooting perfectly on semi auto, but on the full auto mode, it was shooting 2-4 bbs, then it was blank shooting... or event double and triple feeding...
but when turned upside down, it shoots perfectly on full auto


PS: the gun has internal upgrades, such as a 6.03 tighbore barrel, upgraded gearbox, metal hop up, 8mm ball bearing...
PPS: hop up is set to off

thx

Last edited by Gunny_McSmith; August 17th, 2008 at 20:50..
Gunny_McSmith is offline   Reply With Quote
Old August 17th, 2008, 20:51   #2
Shirley
A-56 aka Mr.Hitman
 
Shirley's Avatar
 
Join Date: Nov 2007
Location: Toronto, ON
You have a magazine problem than..
__________________

CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS)
CAPS DIRECTOR # 0047
Shirley is offline   Reply With Quote
Old August 17th, 2008, 20:54   #3
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
so can i repair that or i have to buy new mags?
Gunny_McSmith is offline   Reply With Quote
Old August 17th, 2008, 20:56   #4
KNIVEZS
 
KNIVEZS's Avatar
 
Join Date: Jan 2008
Location: mujahideen
Quote:
Originally Posted by Palucol View Post
so can i repair that or i have to buy new mags?
much easier to buy a new mag
__________________
Latest Infractions Received : Being a dumb ass - Inspired by pusangani


Quote:
Originally Posted by TokyoSeven
Tip of the day: When removing a chain of anal beads from your lovers rectum. Do not pull them out as if you were attempting to start a lawn mower.

sexy time
KNIVEZS is offline   Reply With Quote
Old August 17th, 2008, 20:58   #5
Shirley
A-56 aka Mr.Hitman
 
Shirley's Avatar
 
Join Date: Nov 2007
Location: Toronto, ON
Try changing back to the other hop-up bucking and then shoot. If it's fine, than no need to buy new magazines.

If problem still exists, than it's the magazine. Borrow some of your buddies magazines first before buying new ones. It probably not be the magazine.

Thing is if you always leave BBs in the magazine when not in use, the spring would not be strong enough to push and lose it's power. Might be your magazine lip.
__________________

CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS)
CAPS DIRECTOR # 0047
Shirley is offline   Reply With Quote
Old August 17th, 2008, 21:22   #6
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
i always empty the mags after each use...., and what do you mean by the mag lip?
Gunny_McSmith is offline   Reply With Quote
Old August 18th, 2008, 05:47   #7
The Major
 
The Major's Avatar
 
Join Date: Mar 2007
Location: Provo, Utah
Send a message via AIM to The Major Send a message via MSN to The Major
I don't think its the mag lip - I've seen that be a cause before, but based on your story, I don't think it could be that. If it were the magazine lip, I think you would have had trouble right off the bat.

I had to modify the mag lip in my King Arms M14 mids, because they didn't feed worth jack right out of the box.


I recently worked on a SRC/TSD M16A3 that had some similar feeding issues and it turned out to be a crappy magazine. I think the rifle was about a month old. I've seen it before in several SRC-based rifles. SRC makes more-solid guns these days (compared to their past), but their magazines leave something to be desried.
__________________
The Major is offline   Reply With Quote
Old August 18th, 2008, 09:45   #8
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
ok, then I'll have to buy new mags, but what brand, type should I buy, and are the mags from ebaybanned good?
Gunny_McSmith is offline   Reply With Quote
Old August 18th, 2008, 09:47   #9
The Saint
 
The Saint's Avatar
 
Join Date: Jan 2005
Location: Quebec
Before you try new mags, try dropping a little bit of silicon oil into where the BBs go into the gun. Some AEGs need a little lubrication there to work properly.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."
The Saint is offline   Reply With Quote
Old August 18th, 2008, 10:00   #10
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
nop it doesnt work... but also when i was shooting, i noticed that the motor was heating up after about 300 rounds....is that normal?
Gunny_McSmith is offline   Reply With Quote
Old August 18th, 2008, 10:01   #11
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
BTW the gun is only 2 weeks old
Gunny_McSmith is offline   Reply With Quote
Old August 18th, 2008, 10:15   #12
ShelledPants
 
ShelledPants's Avatar
 
Join Date: Feb 2008
Location: Toronto, On
Are we talking 300 rounds straight on full auto? Yeah, that's normal. :|

So you've lubed the hopup intake, but have you tried lubing the magazine spring?

This has been a fix to a number of star magazines in the past.
__________________


Ár skal r?*sa, sá er annars vill
fé eða fjör hafa. Sjaldan liggjandi úlfur
lær um getur né sofandi maður sigur.
ShelledPants is offline   Reply With Quote
Old August 18th, 2008, 11:01   #13
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
nop it wont work, and the mag misfeeds more now, even on semi auto....
Gunny_McSmith is offline   Reply With Quote
Old August 18th, 2008, 11:06   #14
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
also now bbs just roll down the barrel....
Gunny_McSmith is offline   Reply With Quote
Old August 18th, 2008, 12:48   #15
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Problems with the nozzle now, perhaps?
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 19:05.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.