Maruzen L96 Problems

whoreable · July 7th, 2007, 23:27

Hello, I have a Maruzen L96.

Recently it started to have this issue,

I will have a bb in the chamber, bolt goes forward, I fire. The BB is stuck in the barrel near the hop up.

If I pull the bolt back again and put it forward, it will fire.

Its like the bb is getting stuck and the second time I send the piston forward it will fire.

Any suggestions? PLz help me before Sundays Game Tommorow!!!

guiltyspark · July 8th, 2007, 02:04

only thing that makes sense is the hop-up is set too high. If your chambering a round and the hop-up is too high, then it wont go through. if you cock it again, it will chamber another round pushing the first bb that is stuck behind the hop-up forward. Then when the gun is fired, the first bb is free to be fired.

If your constantly firing one shot and it takes 2 shots to get it out, same thing, the hop-up.

So turn the hop-up lower and start testing if that helps. If not, clean the barrel with some silicone oil.

whoreable · July 8th, 2007, 02:05

I understand that, but its not the issue, hop can be off or on. Also, I remove the magazine so it wont load another round.

So im not sure what the issue is.

guiltyspark · July 8th, 2007, 02:38

well then, i can only think that there is something wrong with the gun internals. Very weird problems.

dave_995 · July 10th, 2007, 09:44

i have a be l96 clone and there is something wrong with the trigger mechanism and iam not sure how its supposed to go back together could someone help me with this cos iam stumped

lupo · July 10th, 2007, 18:45

Sorry for the thread jack but , its a very strange feeling being someone from oxfords avatar.

dave_995 · July 12th, 2007, 07:08

Quote:

Originally Posted by lupo

Sorry for the thread jack but , its a very strange feeling being someone from oxfords avatar.

<<<<<<what is that you ?
i'll change it its just it was the coolest avatar i could find

Kos-Mos · July 12th, 2007, 08:16

Remove your innerbarrel, clean it and check through it facing a light source. Might be a kink or notch inside the barrel that makes the bb stop there. If there is some white stuff inside your barrel when you clean it that probably is the problem.

If your barrel is dead, tell me, I have one that I am not using (got a PDI hop chamber and M14 barrel... stock barrel is no use now)

dave_995 · July 12th, 2007, 11:40

fixed my l96 now found the problem it was to do with the spring latch

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 7th, 2007, 23:27	#1
whoreable Trader rating Join Date: Feb 2003	Maruzen L96 Problems Hello, I have a Maruzen L96. Recently it started to have this issue, I will have a bb in the chamber, bolt goes forward, I fire. The BB is stuck in the barrel near the hop up. If I pull the bolt back again and put it forward, it will fire. Its like the bb is getting stuck and the second time I send the piston forward it will fire. Any suggestions? PLz help me before Sundays Game Tommorow!!!

July 8th, 2007, 02:04	#2
guiltyspark Trader rating Join Date: Nov 2005 Location: vancouver	only thing that makes sense is the hop-up is set too high. If your chambering a round and the hop-up is too high, then it wont go through. if you cock it again, it will chamber another round pushing the first bb that is stuck behind the hop-up forward. Then when the gun is fired, the first bb is free to be fired. If your constantly firing one shot and it takes 2 shots to get it out, same thing, the hop-up. So turn the hop-up lower and start testing if that helps. If not, clean the barrel with some silicone oil. __________________ Last edited by guiltyspark; July 8th, 2007 at 02:06..

July 8th, 2007, 02:38	#4
guiltyspark Trader rating Join Date: Nov 2005 Location: vancouver	well then, i can only think that there is something wrong with the gun internals. Very weird problems. __________________

July 8th, 2007, 02:05	#3
whoreable Trader rating Join Date: Feb 2003	I understand that, but its not the issue, hop can be off or on. Also, I remove the magazine so it wont load another round. So im not sure what the issue is.

July 10th, 2007, 09:44	#5
dave_995 Trader rating Join Date: Jul 2007 Location: oxford england	i have a be l96 clone and there is something wrong with the trigger mechanism and iam not sure how its supposed to go back together could someone help me with this cos iam stumped __________________ snipers rule ok

July 10th, 2007, 18:45	#6
lupo Trader rating Join Date: Dec 2001 Location: vancouver	Sorry for the thread jack but , its a very strange feeling being someone from oxfords avatar.

July 12th, 2007, 08:16	#8
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	Remove your innerbarrel, clean it and check through it facing a light source. Might be a kink or notch inside the barrel that makes the bb stop there. If there is some white stuff inside your barrel when you clean it that probably is the problem. If your barrel is dead, tell me, I have one that I am not using (got a PDI hop chamber and M14 barrel... stock barrel is no use now)

July 12th, 2007, 11:40	#9
dave_995 Trader rating Join Date: Jul 2007 Location: oxford england	fixed my l96 now found the problem it was to do with the spring latch __________________ snipers rule ok

Maruzen L96 Problems

Doctor's Corner