p-90 upgrade

shadowninja · October 23rd, 2006, 21:46

i was woundering if anyone could tell me what i need to get to up grade my p-90 to shoot 350-400 fps im new to upgrading

Mantelope · October 23rd, 2006, 21:50

Spring and bushings.

Amazing KG3 · October 23rd, 2006, 22:22

is it that simple, or will you run into problems in the end? im using a J type battery at 9.6v, and i want more power, eventually more range, but ill just convert to a ps90 barrel. is it as easy as installing a new spring (120-140) and some bushings?

Mantelope · October 23rd, 2006, 22:31

Yes, yes it is. Only caveat is that you need V6-specific bushings. I ran a PDI150% with Guarder bushings and a J-batt, it was perfect. Things started going wrong when I replaced more stuff with Systema/Guarder etc.

thephenom · October 23rd, 2006, 22:40

Bushings and springs are the most basic upgrades. Obviously an upgraded gun will increase wear and tear, so over time, you'll need to replace other parts.

Mantelope · October 23rd, 2006, 22:42

Not likely on a P90 unless you're pushing 400FPS.

Amazing KG3 · October 23rd, 2006, 22:46

what would you recommend for a spring (110,115,140)? sorry for the hijack shadowninja...

Mantelope · October 23rd, 2006, 22:50

Check out ILLusion's spring chart, the numbers will be very close to what you'll get... in fact, yours might be a bit higher with everything else stock. The only other part you might need to replace is the spring guide, and that's only when you're close to 400FPS.

shadowninja · October 23rd, 2006, 23:18

what FPS would i get if i used a 150% spring

Mantelope · October 24th, 2006, 00:13

I dunno, look at the freaking chart.

ILLusion · October 24th, 2006, 00:35

http://www.airsoftcanada.com/SpringChart.html

Amazing KG3 · October 24th, 2006, 14:39

how the hell do you get a j type battery to fit in a p90?

Guardian · October 24th, 2006, 15:16

http://www.airsoftcanada.com/showthr...&highlight=p90

Amazing KG3 · October 24th, 2006, 15:19

huh, woulda wished i knew that before i got it.

Amazing KG3 · October 24th, 2006, 18:24

so, i understand what i need to cut, but i know it wont fit around the wires. I see i need to do something around the fusebox. Ive never opened a AEG before, so whats the easiest way to do this without having to do to much?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 23rd, 2006, 21:46	#1
shadowninja Trader rating Join Date: Apr 2006 Location: kitchener,ont,canada	p-90 upgrade i was woundering if anyone could tell me what i need to get to up grade my p-90 to shoot 350-400 fps im new to upgrading

October 23rd, 2006, 21:50	#2
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	Spring and bushings. __________________

October 23rd, 2006, 22:31	#4
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	Yes, yes it is. Only caveat is that you need V6-specific bushings. I ran a PDI150% with Guarder bushings and a J-batt, it was perfect. Things started going wrong when I replaced more stuff with Systema/Guarder etc. __________________

October 23rd, 2006, 22:22	#3
Amazing KG3 Trader rating Join Date: Feb 2006 Location: Calgary, AB	is it that simple, or will you run into problems in the end? im using a J type battery at 9.6v, and i want more power, eventually more range, but ill just convert to a ps90 barrel. is it as easy as installing a new spring (120-140) and some bushings?

October 23rd, 2006, 22:40	#5
thephenom Trader rating Join Date: Jan 2006 Location: Toronto	Bushings and springs are the most basic upgrades. Obviously an upgraded gun will increase wear and tear, so over time, you'll need to replace other parts.

October 23rd, 2006, 22:42	#6
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	Not likely on a P90 unless you're pushing 400FPS. __________________

October 23rd, 2006, 22:46	#7
Amazing KG3 Trader rating Join Date: Feb 2006 Location: Calgary, AB	what would you recommend for a spring (110,115,140)? sorry for the hijack shadowninja...

October 23rd, 2006, 22:50	#8
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	Check out ILLusion's spring chart, the numbers will be very close to what you'll get... in fact, yours might be a bit higher with everything else stock. The only other part you might need to replace is the spring guide, and that's only when you're close to 400FPS. __________________

October 23rd, 2006, 23:18	#9
shadowninja Trader rating Join Date: Apr 2006 Location: kitchener,ont,canada	what FPS would i get if i used a 150% spring

October 24th, 2006, 00:13	#10
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	I dunno, look at the freaking chart. __________________

October 24th, 2006, 00:35	#11
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	http://www.airsoftcanada.com/SpringChart.html __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

October 24th, 2006, 14:39	#12
Amazing KG3 Trader rating Join Date: Feb 2006 Location: Calgary, AB	how the hell do you get a j type battery to fit in a p90?

October 24th, 2006, 15:16	#13
Guardian Trader rating Join Date: Aug 2004 Location: Ajax-Pickering (GTA)	http://www.airsoftcanada.com/showthr...&highlight=p90 __________________ "Sex is one of the 9 reasons for reincarnation, the other 8 are unimportant." Henry Miller Guardian’s airsoft projects @ http://www3.sympatico.ca/aftershock/

October 24th, 2006, 15:19	#14
Amazing KG3 Trader rating Join Date: Feb 2006 Location: Calgary, AB	huh, woulda wished i knew that before i got it.

October 24th, 2006, 18:24	#15
Amazing KG3 Trader rating Join Date: Feb 2006 Location: Calgary, AB	so, i understand what i need to cut, but i know it wont fit around the wires. I see i need to do something around the fusebox. Ive never opened a AEG before, so whats the easiest way to do this without having to do to much?

p-90 upgrade

Upgrades & Modifications