MP7 Upgrades

[Jayhad]

Hey everyone I upgraded my MP7 a bit, I added a new cylinder head, spring, spring guide, bearings, longer tight bore barrel but the dude that did the work pouched my Hop up and they aren't like normal hop ups.

I have done the normal searches just wondering if any of you have seen a MP7 hop up unit.

[Jayhad]

I figured I would tell you all what I have done to my MP7.
I Have upgraded my MP7 currently, be careful ordering AEP stuff as it may say it is MP7 compatible it isn't.
I ordered a new cylinder from Red Wolf that is said to be for the G18, M93 and MP7, but once it was installed it was about 8mm shorter then the stock one so no go.

I have a spring, spring guide, piston head, tightbore longer barrel, and bearings. If you go with a longer barrel you will need a new silencer adapter and the barrel/muzzle base the adapter threads to, or I guess you could drill them out.

I have ordered some new stuff like a new cylinder and polycarbonate piston body

As for battery I have NINE BALL External Battery Adapter from WGC, then either mount the battery off of one of the rails or run a battery sling... don't waste your time with a Li-po, just use a sanyo 8.4v AEG battery.

you can find stuff here http://www.x-fire.org/aeg/2004other/e.hk.html
or here http://uncompany.com/ search MP7
or here http://www.wgcshop.com/

NOTE THE ONLY PROBLEM I HAVE EXPERIENCED IS THAT THE GEARS NEEDED DEBURRED
AND THE DUDE THAT DID ALL THE WORK FOR ME SCREWED MY HOP UP AND THEY ARENT AEG HOPUPS AND THEY ARE NOT AVAILIBLE FROM WHAT I HAVE BEEN ABLE TO FIND.

Hope this helps if you find a MP7 hop up LET ME KNOW