|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 16th, 2015, 13:03
|
#1 |
|
AK Buttpad
I'm looking for a buttpad for my GHK AK, I've been looking around for a few days without luck not able to find anything that will work and ship to Canada. I installed a RS polymer stock which came without hardware for it and the buttpad from the orginal GHK doesn't fit as the screws don't line up and it's too small height wise. Wondering if anyone knows where to get one preferably RS. Dimensions are 4 inches in height, 2 5/8 inches between the screws measured from the centre of both screw holes, 3/8 of an inch from the top of the stock to the top edge of the hole for the top screw with this gap being 5/8 inches from the bottom screwhole and the bottom of the stock, and the stock is 1.5 inches in width. I'd prefer a ribbed metal plate without the trap door but I'd take whatever if it's available within Canada so long as it's held in with screws and isn't one of the slip on rubber recoil reducing pads.
|
|
|
|
|
July 18th, 2015, 01:21
|
#2 |
|
+1 on this question
|
|
|
|
|
July 18th, 2015, 07:02
|
#3 |
|
Dmitry[VDV"Romashka"]
|
__________________
Мой арсенал: АКМС, АК74, АКС74, АК74М, АК103, АК104, АК105 |
|
|
|
|
July 21st, 2015, 17:23
|
#4 |
|
No I mean like this.
 Stock ribbed pad without a trap door my stock LCT doesn't fit. |
|
|
|
|
|
July 22nd, 2015, 19:09
|
#5 |
|
http://www.ironwooddesigns.com/IWDhardware.html You need East German butt plate if stock in the picture you posted is what you have.
__________________
Op Woodsman. Biggest WW2 event in Ontario. Last edited by 666; July 22nd, 2015 at 19:12.. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
