MadBull Ultimate Hopup released today

[Drake]

Originally Posted by baker_Jeff

I have some of these on the way with my next stock order. I will do a Youtube review for sure!

Sweet, looking forward to that!

[KoolAidMan]

now only if this works in that ics l85 im getting tomorow : ) it would be one the ultimate aeg IMO at least ;P

[DarkAngel]

Any idea when the Optional Tracer unit or the complete unit including the tracer unit will be availible?

[Gonzo Sleeper]

Interested in a full unit with tracer..make my cqb even smaller and still use tracers..hope it doesnt have the same problem as the mag....that thing sucked

[grantmac]

I personally think it's brilliant! ICS M4s with the dial hop-up have always been a lot more accurate and consistant for me, or G36s for that matter.
With that "window" where the tracer unit goes this will let modders use optical devices to detect an empty mag. There have been a few modified hop-ups with optical sensors in them but this makes it a really easy proposition.
Cheers,
Grant

[Drake]

Originally Posted by grantmac

With that "window" where the tracer unit goes this will let modders use optical devices to detect an empty mag. There have been a few modified hop-ups with optical sensors in them but this makes it a really easy proposition.

Paging Dr.DonP!

That would be a nifty addition to the Trigger Master

Originally Posted by Drake

Paging Dr.DonP!

That would be a nifty addition to the Trigger Master

Wouldn't this not work since not all the bbs will be shot?

[Styrak]

Originally Posted by pawscal

Wouldn't this not work since not all the bbs will be shot?

No it wouldn't work because you'd still have BB's sitting in the feed tube that can't be fired.

[Mitchell12]

Originally Posted by Styrak

No it wouldn't work because you'd still have BB's sitting in the feed tube that can't be fired.

It'd probably be simpler to mod all your mags so that when they are empty they complete a circuit. Don't see it being overly hard. Plus you'd still beable to use un modded mags.

[tunabreath]

Some magazines, such as the D-Boys real caps, have an extended spring follower which goes out past the end of the magazine up into the feed tube to feed every last BB. I'm sure an optical sensor could be made to tell the difference between the BBs and the spring follower and cut power accordingly.

[Mitchell12]

Originally Posted by tunabreath

Some magazines, such as the D-Boys real caps, have an extended spring follower which goes out past the end of the magazine up into the feed tube to feed every last BB. I'm sure an optical sensor could be made to tell the difference between the BBs and the spring follower and cut power accordingly.

I'm doubtful about that. But how about a magnetic extended follower with a reed switch along the feed tube?

[Styrak]

Originally Posted by Mitchell12

It'd probably be simpler to mod all your mags so that when they are empty they complete a circuit. Don't see it being overly hard. Plus you'd still beable to use un modded mags.

You go get to work on that then.

[shiftsup]

Today I installed the Madbull Ultimate Hop Up into my completely stock CA XM 177 E2. Prior to installation this AEG's FPS was chronied at approximately 330 FPS. With the Ultimate Hop Up Unit installed the FPS was chronied at approximately 400 fps.

Has anyone else experienced this significant increase in muzzle velocity?

[Huron]

Originally Posted by Mitchell12

I'm doubtful about that. But how about a magnetic extended follower with a reed switch along the feed tube?

Drill a small hole through the extended follower so the sensor on the other side sees through it once it's pushed every last bb maybe?

[medhatboy]

Originally Posted by shiftsup

Today I installed the Madbull Ultimate Hop Up into my completely stock CA XM 177 E2. Prior to installation this AEG's FPS was chronied at approximately 330 FPS. With the Ultimate Hop Up Unit installed the FPS was chronied at approximately 400 fps.

Has anyone else experienced this significant increase in muzzle velocity?

would love to know if anyone else has had this happen, was thinking of getting one for my M4, but if it makes a jump in fps like that, I would not be able to use my gun on most fields as it would be well over 400fps (already doing about 375). Plus, I was poking around for some reviews and came across a board in the US, the name of the board escapes me right now, but some was saying that they had to mod their bodies with some brands of AEGs to get it to fit, and even going as far as to say that Madbull was making a body that this hop up was ment for, that it wasn't ment for other aeg bodies.