ICS mp5 trouble shooting

Huge · June 15th, 2010, 23:47

I gamed my ICS mp5a5 for the first time tonight and it was good, but there was trouble shooting from time to time. Looks like there was a BB jammed (could see it in the hop-up sort of tunnel through the magwell). Everytime I would dislodge the BB with a rod, put the mag back in but the same thing would happen again. Sometimes, the problem was resolved after taking out the BB though.

Any thoughts?

SlashH4X · June 16th, 2010, 01:55

check your hopup, your gun may be over hopped

VooDooPeteK · June 16th, 2010, 02:45

when you pull the mag out that BB you see is just one that was chambered into the hop up and this is normal.

As for the not shooting properly, what exactly was it doing?

try and turn your hop up all the way off then (with small adjustments) turn it up and fire it until its shooting nice and strait.

If the problem still happens then let us know what exactly its doing

chaosnemesis · June 16th, 2010, 06:44

What bb's are you using?

Huge · June 16th, 2010, 10:19

Cool, I'll try adjusting the hop up. As for the BBs, I was usingg some 0.25 somebody gave me (I dont know the brand) and I too thought that was the problem so I emptied my mags and filled them with my usual 0.2 bastards, but nothing changed...

Spawn28 · June 16th, 2010, 10:29

Is it possible the mags are the issue are they all the same brand might wanna try a different brand could be they are not seating correctly?

Huge · June 16th, 2010, 10:35

in fact they are all the same brand (dont know exactly which though, but they have the same markings). But the previous owner didnt seem to have problem with them.

Spawn28 · June 16th, 2010, 10:42

Did the previous owner have the same AEG as you? if not then i would definatly try a different mag brand if he did still might wanna try a different mag just to eliminate that from the list.

Huge · June 16th, 2010, 10:48

Quote:

Originally Posted by Spawn28

Did the previous owner have the same AEG as you? if not then i would definatly try a different mag brand if he did still might wanna try a different mag just to eliminate that from the list.

yeah he did, they were his AEG and his mags, so I guess he would have known if it was a mag issue, but I'll still try and find one to make sure.

Sha Do · June 16th, 2010, 11:20

Check to see if you have torn or other wise damaged hop up sleeve. This will usually always lead to the problems you are describing.
Also, make sure that your bucking is set properly in the fact that the opening for the loading of the BBs is perfectly circular and not oval (or misshaped).

SHA DO

Huge · June 16th, 2010, 12:33

well now I tried again, setting the hopup in various positions. Nothing. About 1 in 5 BBs come out but they just drop to the ground at the end of the barrel. Battery is fully charged and I use 0.2 bastards.

coach · June 16th, 2010, 13:18

Quote:

Originally Posted by Huge

well now I tried again, setting the hopup in various positions. Nothing. About 1 in 5 BBs come out but they just drop to the ground at the end of the barrel. Battery is fully charged and I use 0.2 bastards.

feed issue and air leak. I'm siding with Sha Do on a torn hopup.

open your receiver and take out the inner barrel with the hopup unit. look through the inner barrel from the hopup side and see if the hopup rubber is uniform all around.

Huge · June 17th, 2010, 21:21

I just opened my gun right now and only thing I noticed is that there was a BB just behind the feeding hole in my hopup (no BB when you see through the magwell, but one when you see from behind the barrel(. I dont know if I'm clear on this, difficult to explain, but could this be the problem?

EDIT : no it wasnt. Took it out but there,s the same problem. I tried putting one BB by hand in the hopup hole and fire the gun upside down to look at what happens. And it seems like the BB can,t be pushed forward. I can see the nozzle trying to push the BB but it seems to stop before actually launching the BB (or sometimes it does push it until i cant see it, but no BB come out). What could it be?

WolvesSoulZ · June 17th, 2010, 23:39

Do the nozzle looks in good conditions? Is it moving right when you shoot? Could be related to that too.

Also, try to check for the hop up nub, maybe your nub is too tight, or misaligned.
But as other said, it may be the sleeve that is ripped. Or misaligned too.

Kos-Mos · June 18th, 2010, 11:29

As stated, probably the sleeve that is damaged. Can also be the barrel clip of the hop-up that is broken, making the barrel move forward 1mm and there comes the air leak. Can also be the nozzle/tappet plate.

We will see tomorrow anyways.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 15th, 2010, 23:47	#1
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	ICS mp5 trouble shooting I gamed my ICS mp5a5 for the first time tonight and it was good, but there was trouble shooting from time to time. Looks like there was a BB jammed (could see it in the hop-up sort of tunnel through the magwell). Everytime I would dislodge the BB with a rod, put the mag back in but the same thing would happen again. Sometimes, the problem was resolved after taking out the BB though. Any thoughts?

June 16th, 2010, 02:45	#3
VooDooPeteK Trader rating Join Date: Feb 2010 Location: Thorold, Ont	when you pull the mag out that BB you see is just one that was chambered into the hop up and this is normal. As for the not shooting properly, what exactly was it doing? try and turn your hop up all the way off then (with small adjustments) turn it up and fire it until its shooting nice and strait. If the problem still happens then let us know what exactly its doing __________________ http://www.gorillaairsoftradio.com/ Great Airsoft Podcast Gun tech work, Parts, Upgrades and anything else you might need http://www.fortythievesmcnation.com/ Support your local 1%er

June 16th, 2010, 10:29	#6
Spawn28 I am manly hear me squeek Trader rating Join Date: Apr 2007 Location: North Bay The Gateway to Hells Ars!	Is it possible the mags are the issue are they all the same brand might wanna try a different brand could be they are not seating correctly? __________________

June 16th, 2010, 01:55	#2
SlashH4X Trader rating Join Date: Jan 2009	check your hopup, your gun may be over hopped

June 16th, 2010, 06:44	#4
chaosnemesis Trader rating Join Date: Nov 2008 Location: Toronto	What bb's are you using?

June 16th, 2010, 10:19	#5
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	Cool, I'll try adjusting the hop up. As for the BBs, I was usingg some 0.25 somebody gave me (I dont know the brand) and I too thought that was the problem so I emptied my mags and filled them with my usual 0.2 bastards, but nothing changed...

June 16th, 2010, 10:35	#7
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	in fact they are all the same brand (dont know exactly which though, but they have the same markings). But the previous owner didnt seem to have problem with them.

June 16th, 2010, 10:42	#8
Spawn28 I am manly hear me squeek Trader rating Join Date: Apr 2007 Location: North Bay The Gateway to Hells Ars!	Did the previous owner have the same AEG as you? if not then i would definatly try a different mag brand if he did still might wanna try a different mag just to eliminate that from the list. __________________

June 16th, 2010, 11:20	#10
Sha Do Trader rating Join Date: Jun 2003 Location: No where to be seen......Hillsburgh	Check to see if you have torn or other wise damaged hop up sleeve. This will usually always lead to the problems you are describing. Also, make sure that your bucking is set properly in the fact that the opening for the loading of the BBs is perfectly circular and not oval (or misshaped). SHA DO __________________ SHOOT TO KILL......... WITH COMPASSION

June 16th, 2010, 12:33	#11
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	well now I tried again, setting the hopup in various positions. Nothing. About 1 in 5 BBs come out but they just drop to the ground at the end of the barrel. Battery is fully charged and I use 0.2 bastards.

June 17th, 2010, 21:21	#13
Huge formerly Huge94 Trader rating Join Date: Nov 2007 Location: Montreal, QC	I just opened my gun right now and only thing I noticed is that there was a BB just behind the feeding hole in my hopup (no BB when you see through the magwell, but one when you see from behind the barrel(. I dont know if I'm clear on this, difficult to explain, but could this be the problem? EDIT : no it wasnt. Took it out but there,s the same problem. I tried putting one BB by hand in the hopup hole and fire the gun upside down to look at what happens. And it seems like the BB can,t be pushed forward. I can see the nozzle trying to push the BB but it seems to stop before actually launching the BB (or sometimes it does push it until i cant see it, but no BB come out). What could it be? Last edited by Huge; June 17th, 2010 at 21:59..

June 17th, 2010, 23:39	#14
WolvesSoulZ Trader rating Join Date: Jun 2008	Do the nozzle looks in good conditions? Is it moving right when you shoot? Could be related to that too. Also, try to check for the hop up nub, maybe your nub is too tight, or misaligned. But as other said, it may be the sleeve that is ripped. Or misaligned too.

ICS mp5 trouble shooting

Doctor's Corner