WE replacement parts?

[Assault Pioneer]

okay so I have a WE/ AWSS open bolt PDW and a part got knocked loose after a day of firing. it's the little screw/hinge system that holds the stock to the gun, according to the manuals part 82 and 83 are needed. I'm not just gonna jam any screw into that gun it requires a certian radius in width also.
this little screw is pretty important as it holds the entire stock to the gun. but I can't find it on the internet.
I saw in a forum you can get replacement parts from WE but their website seems to be empty, (you click a link for parts and it shows 0.) http://www.weairsoft.com/products.php so I was wondering how I would go about getting a replacement pin from them. already contacted them via the "contact us" email thing but theres gotta be a better way, like an online catalogue with the parts and an ordering system.

Has anyone gotten replacement parts from WE and how'd you get it? (like directly from WE not finding the part you need on the internet somewhere I tried that they don't sell these screw's anywhere)

thanks
A-P

[ex]

This seems to be a common problem with them. Here's a link to the Parts you need. Shipping is expensive but super fast I have ordered from them 4 times and gotten all my packages within 3-5 days.

http://www.airsoftbuddy.com/index_ep...roducts_id=694

Use Blue Loctite on the new one so it doesnt fall out

[Assault Pioneer]

oh, was just on there, slow website I left before the whole page finished.

thanks man!

[coach]

Try and see if you can find a suitable screw and sleeve/tube from a hardware store. $15 usd + $21 usd shipping is a lot for 2 screws and a bolt (for lack of names to call it)

I lost that screw too so I know what you're experiencing. lol. Loctite everything! The blowback on these things are so nice but proper attention to prepping them is required. Also check your forward outter barrel section. There is a grub screw on the bottom near the gas block that will back out too.