'Battleaxe' G36C / M4 magazine adaptor

SavageDany · June 4th, 2011, 01:11

I currently use a Kwa H&K G36C and i want to know if this adaptor will fit on my gun. here the link : http://www.bentbarrelgundoctor.com/a...s/show/1784616

Also does anyone know if all kind of m4 mag fit in it or do i have to buy a special brand?

Styrak · June 4th, 2011, 06:48

Yes. Any M4 mag.

THe_Silencer · June 4th, 2011, 07:15

Any mag will work, though they may be fitment issues. Tell us how it goes.

cbourdeau · June 4th, 2011, 11:34

I have this adaptor and a kwa g36c as well and I don't use it because I have feeding problems with it... The mags are too loose in it and even if you try to use tape or other methods, they don't feed well.

To make the adaptor fit, you'll have to modify it.

FoxhoundNB · June 4th, 2011, 11:36

My friend has one, and it works perfectly, he's been using it for years and has never had feeding problems.

The mags go in a little funny but they go in nonetheless.

Drake · June 4th, 2011, 11:40

This isn't gear; moved to the right section. Please post in the correct section in the future.

Darklen · June 4th, 2011, 14:18

I have a couple of clients using these adapters and I've either sold or had every variation of them since Private Parts of the the UK first released them waaay back.

First Gen PP was ok, I had some fitment issues but only with certain brands of mags. Wobble was pretty bad though on almost every brand.

Second Gen PP fixed most of the wobble but still had fitment issues with certain brands.

Socom Gear was about the same as second Gen PP, but the plastic seems pretty brittle in comparison. I had almost every one of them break.

The Battleaxe ones hold up better. There still some wobble and I've heard of some issues with certain brands but KA, MAG and TM all work fine with minimal wobble.

KWA G36's do have to have the adapter modified for them to fit properly. There's a part on their mechbox that gets in the way. I haven't had to modify them for TM, CA or JG however. The mod isn't difficult and I can do it with a Dremel in about 15 seconds.

Julz · June 27th, 2011, 01:35

I use a TM g36c, with battleaxe conversion. Bought it from Bent Barrel too funny enough.

I have two types of mags that i used.

Magpul 30rnd PTS mags - Were a little tough to get in at first, the mag release was tight on them, but has since worn in and are easy to get in now, they work GREAT, no misfires ever.

King Arms 65 RND.
These snap in great, but don't hold up. BUT, this is the same story when using them on an m16 so we can say that it's the mags themselves, i rigged a bungie system to keep pressure on the mag and they work ok.

I haven't been disappointed with this system at all, especially since G36 mags cost a million dollars. Plus, having mag compatibility with the 99% of players that use armalites, is very handy.

If you are going to use a conversion, GO WITH BATTLEAXE.

Strelok · February 24th, 2012, 18:57

Appologies for the necro but its on the same note. Got a CA G36 here, curious if the adaptor will work on it?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 4th, 2011, 01:11	#1
SavageDany Trader rating Join Date: Jun 2011 Location: Terrebonne/Quebec	'Battleaxe' G36C / M4 magazine adaptor I currently use a Kwa H&K G36C and i want to know if this adaptor will fit on my gun. here the link : http://www.bentbarrelgundoctor.com/a...s/show/1784616 Also does anyone know if all kind of m4 mag fit in it or do i have to buy a special brand?

June 4th, 2011, 06:48	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Yes. Any M4 mag. __________________ Airsoft Sales and Repair/Upgrade Services

June 4th, 2011, 07:15	#3
THe_Silencer Trader rating Join Date: Jul 2009 Location: Hamilton,ON	Any mag will work, though they may be fitment issues. Tell us how it goes. __________________ It is the mark of an educated mind to be able to entertain a thought without accepting it - Aristotle -Founder of Steel City Hamilton Infantry and Tactics -Certified level 43 Autosniper by Commander Amos

June 4th, 2011, 11:34	#4
cbourdeau Trader rating Join Date: Aug 2010 Location: Chateauguay	I have this adaptor and a kwa g36c as well and I don't use it because I have feeding problems with it... The mags are too loose in it and even if you try to use tape or other methods, they don't feed well. To make the adaptor fit, you'll have to modify it. Last edited by cbourdeau; June 4th, 2011 at 11:36..

June 4th, 2011, 11:36	#5
FoxhoundNB Trader rating Join Date: Jan 2011 Location: Fredericton NB	My friend has one, and it works perfectly, he's been using it for years and has never had feeding problems. The mags go in a little funny but they go in nonetheless.

June 4th, 2011, 11:40	#6
Drake E-01 Trader rating Join Date: Dec 2001 Location: Montreal, QC	This isn't gear; moved to the right section. Please post in the correct section in the future. __________________

June 4th, 2011, 14:18	#7
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	I have a couple of clients using these adapters and I've either sold or had every variation of them since Private Parts of the the UK first released them waaay back. First Gen PP was ok, I had some fitment issues but only with certain brands of mags. Wobble was pretty bad though on almost every brand. Second Gen PP fixed most of the wobble but still had fitment issues with certain brands. Socom Gear was about the same as second Gen PP, but the plastic seems pretty brittle in comparison. I had almost every one of them break. The Battleaxe ones hold up better. There still some wobble and I've heard of some issues with certain brands but KA, MAG and TM all work fine with minimal wobble. KWA G36's do have to have the adapter modified for them to fit properly. There's a part on their mechbox that gets in the way. I haven't had to modify them for TM, CA or JG however. The mod isn't difficult and I can do it with a Dremel in about 15 seconds. __________________ *ASC Age Verifier for Red Deer & Area Alberta*

June 27th, 2011, 01:35	#8
Julz Trader rating Join Date: Mar 2009 Location: Red Deer AB	I use a TM g36c, with battleaxe conversion. Bought it from Bent Barrel too funny enough. I have two types of mags that i used. Magpul 30rnd PTS mags - Were a little tough to get in at first, the mag release was tight on them, but has since worn in and are easy to get in now, they work GREAT, no misfires ever. King Arms 65 RND. These snap in great, but don't hold up. BUT, this is the same story when using them on an m16 so we can say that it's the mags themselves, i rigged a bungie system to keep pressure on the mag and they work ok. I haven't been disappointed with this system at all, especially since G36 mags cost a million dollars. Plus, having mag compatibility with the 99% of players that use armalites, is very handy. If you are going to use a conversion, GO WITH BATTLEAXE.

February 24th, 2012, 18:57	#9
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Appologies for the necro but its on the same note. Got a CA G36 here, curious if the adaptor will work on it?

'Battleaxe' G36C / M4 magazine adaptor

Upgrades & Modifications