Need help Upgrading the ROF and range on my CA m15a4 Socom

[Wolf13]

I have a CA m15a4 socom, its all stock and i get about 20 bps and about 360 fps,I have a 9.6v b attery but i want to use my 12v... i want to increase the ROF without really losing FPS and i want to increase the range, what do i need to buy to do this? here's a link for the gun ... http://www.airsoftgi.com/product_inf...oducts_id=3036

[mr_nuts31]

to increase rof: use a lipo, a hi speed motor, or both even
to increase range, get a tightbore barrel and a decent hopup rubber

[Wolf13]

Originally Posted by mr_nuts31

to increase rof: use a lipo, a hi speed motor, or both even
to increase range, get a tightbore barrel and a decent hopup rubber

alright so all i need to buy is a highspeed motor and have someone install it and im good to go, or do i also need to buy high speed gears?

[ThunderCactus]

your at 1200rpm and you want to increase your speed? lol
Firstly, get a MOSFET and reqire your gun with high quality wire, that should give you an extra 100rpm right there.
If you want it shooting damn fast and it's all stock your going to need;
piston, piston head, cylinder head, gears (torque or double torque is fine), shims, bushings (not bearings), you won't need a high speed motor but you will need a good motor.
Then read this FAQ.... http://www.airsoftcanada.com/showthread.php?t=99899
And get yourself an 11.1v LiPo
Anyway a reliable high speed setup is going to cost alot.

My M249 is shooting 1350rpm (22.5rps), and is capable of 1500rpm. Does 360fps, gets ridiculously fantastic range (without a tightbore), and in it I've got a tuned up G&P M140 motor, custom built triggermaster SW-COMP, 11.1v 20C 4900mah LiPo, and prometheus everything for internals, with triple torque gears (not max torque so i dont need a half tooth piston)
In total I've dropped something like $600 for upgrades and I've never broken anything

[Wolf13]

Originally Posted by ThunderCactus

your at 1200rpm and you want to increase your speed? lol
Firstly, get a MOSFET and reqire your gun with high quality wire, that should give you an extra 100rpm right there.
If you want it shooting damn fast and it's all stock your going to need;
piston, piston head, cylinder head, gears (torque or double torque is fine), shims, bushings (not bearings), you won't need a high speed motor but you will need a good motor.
Then read this FAQ.... http://www.airsoftcanada.com/showthread.php?t=99899
And get yourself an 11.1v LiPo
Anyway a reliable high speed setup is going to cost alot.

My M249 is shooting 1350rpm (22.5rps), and is capable of 1500rpm. Does 360fps, gets ridiculously fantastic range (without a tightbore), and in it I've got a tuned up G&P M140 motor, custom built triggermaster SW-COMP, 11.1v 20C 4900mah LiPo, and prometheus everything for internals, with triple torque gears (not max torque so i dont need a half tooth piston)
In total I've dropped something like $600 for upgrades and I've never broken anything

where can i buy the mosfet?

[HKGhost]

contact DonP

[ThunderCactus]

http://unconventional-airsoft.com/we...2nss7g4hha1jc3
You'll want the simple mosfet unit if your sticking to NIMH batteries

[L473ncy]

It's the "Trigger Master MOSFET" that you want and available from DonP. I believe they're based off the "Extreme Fire" MOSFET's.

If you short stroke your piston (some people do up to 3 teeth or so I've heard), it's a pretty standard "upgrade" and can increase your ROF. Highspeed motor and high speed gears as well but if your spring is too strong it won't pull it back because not enough torque will be generated.

[CDN_Stalker]

Simplest range increase you can do is to upgrade to heavier BBs, 0.28g minimum for outdoor usage.

[Amos]

That + upgraded hop-up rubber and nub.

I'd recommend the ARS hop-up rubber paired with a Shredder's Concave Spacer.

I've used this in several builds now and it's netted me fantastic results so far.