Hbar ~update~WITH pictures omg

Tankdude · August 5th, 2005, 17:51

I am going to be making myself a hbar barrel for my aug.

Going to be 12 cm longer then the normal barrel and made of steel and might be a little thicker pending on weight. Will be threaded 14- on the end if need be. I might just make my own flash hider. bipod not included.

If I make the first one it probely woldn't take long to make a few others.

Wondering if there are any other aug owners out there looking for a hbar barrel?

Don't clutter this thread with stupid comments, just post if you would be interested.

I plan to make 2 extra if possible.

odp · August 5th, 2005, 19:42

Interested, pending cost.

Lisa · August 6th, 2005, 19:22

Likewise

Tankdude · August 12th, 2005, 17:51

update: Will be made of aluminum. 3 hbar barrels are planned, but I could make more if interest pops up. I am also thinking about a bull barrel and a cilvian model.

Cost is unknown yet. I am the one programing the machine and running it and the metal doesn't cost very much.

Tankdude · August 25th, 2005, 19:49

The first barrel is made. It fits but I have to make the ID a bit bigger.

It is long and silver and fits in the collar very tight, but it does fit.

I have two more already cut out on the cnc lathe and just have to drill the barrel and do a finishing pass on the surface. I'm going to set up the cnc lathe to do the drilling for me from now on as it took a few hours just to do the first barrel. in out in out in out, oil, in out in out in out oil.

Don't have a word on price yet, but I wouldn't worry about it, be dirt cheap pending on a few things, I guess the max would be 100, but it probly be closer to 50-75 range shipped pending on a few things.

I can also make shorter barrels. I plan to make a para barrel for myself.

Shinjin_MC · August 25th, 2005, 21:26

oooh
HBAR barrel?
count me in!
ill make a deposit too if you want

Tankdude · August 25th, 2005, 21:32

odp · August 25th, 2005, 21:43

Looks pretty slick so far. The price isn't bad at all. Will definately take one, if your cost estimates are correct. Will the inner barrels need barrel spacers or does the inner barrel fit well?

Tankdude · August 25th, 2005, 21:54

doesn't fit as of right now. I need to make the hole wider. Prototype and I forgot to bring in the barrel and just guessed at the hole (read: stupid me)

The inner barrel should fit very nice once I drill a bit more. Maybe some tape, but leaving it to float free might be best.

Tankdude · August 26th, 2005, 16:51

Done. I have 5 ready to go. I did the QC and they all fit. You have to cut the silver tube that surrounds the inner barrel back to the collar. This was just because of drill bits or a lack of.

75 dollars shipped. extra ones will be 60 each. First people get the pick of the litter.

Aquamarine · August 29th, 2005, 19:36

Those look DAMN DAMN sexy buddy. I'm anxiously awaiting a review

(pulls his Aug out)

Tankdude · August 29th, 2005, 19:40

Lisa has one on the way. I already used mine at a 24hr game and it rocked. I could do a review, but I might be a little bias.

Far right.

Lisa · August 29th, 2005, 22:04

Looking forward to it, the price was right.

Shinjin_MC · September 6th, 2005, 19:30

uhm
quick question
how do you remove the original barrel from that foregrip attatchment part?
there is this nubbie right by the gas port thing
but i have no idea how the parts detach

Tankdude · September 6th, 2005, 19:35

remove the forward grip. Under it is a small screw. Undo that and the barrel will slide right out.

Cut the silver tube back to the collar.

Insert new barrel and re tighten screw.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 5th, 2005, 17:51	#1
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	Hbar ~update~WITH pictures omg I am going to be making myself a hbar barrel for my aug. Going to be 12 cm longer then the normal barrel and made of steel and might be a little thicker pending on weight. Will be threaded 14- on the end if need be. I might just make my own flash hider. bipod not included. If I make the first one it probely woldn't take long to make a few others. Wondering if there are any other aug owners out there looking for a hbar barrel? Don't clutter this thread with stupid comments, just post if you would be interested. I plan to make 2 extra if possible.

August 6th, 2005, 19:22	#3
Lisa Looking for form T-whatev Trader rating Join Date: Jun 2004 Location: Trenton	Likewise __________________ May you live in interesting times. ASCMART, your smart choice

August 29th, 2005, 19:36	#11
Aquamarine PanSexual Trader rating Join Date: Oct 2002 Location: Asakusa, Japan	Those look DAMN DAMN sexy buddy. I'm anxiously awaiting a review (pulls his Aug out) __________________

August 5th, 2005, 19:42	#2
odp Trader rating Join Date: Sep 2002 Location: Vancouver	Interested, pending cost.

August 12th, 2005, 17:51	#4
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	update: Will be made of aluminum. 3 hbar barrels are planned, but I could make more if interest pops up. I am also thinking about a bull barrel and a cilvian model. Cost is unknown yet. I am the one programing the machine and running it and the metal doesn't cost very much.

August 25th, 2005, 19:49	#5
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	The first barrel is made. It fits but I have to make the ID a bit bigger. It is long and silver and fits in the collar very tight, but it does fit. I have two more already cut out on the cnc lathe and just have to drill the barrel and do a finishing pass on the surface. I'm going to set up the cnc lathe to do the drilling for me from now on as it took a few hours just to do the first barrel. in out in out in out, oil, in out in out in out oil. Don't have a word on price yet, but I wouldn't worry about it, be dirt cheap pending on a few things, I guess the max would be 100, but it probly be closer to 50-75 range shipped pending on a few things. I can also make shorter barrels. I plan to make a para barrel for myself.

August 25th, 2005, 21:26	#6
Shinjin_MC Trader rating Join Date: Dec 2003 Location: sauga, on	oooh HBAR barrel? count me in! ill make a deposit too if you want

August 25th, 2005, 21:32	#7
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick

August 25th, 2005, 21:43	#8
odp Trader rating Join Date: Sep 2002 Location: Vancouver	Looks pretty slick so far. The price isn't bad at all. Will definately take one, if your cost estimates are correct. Will the inner barrels need barrel spacers or does the inner barrel fit well?

August 25th, 2005, 21:54	#9
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	doesn't fit as of right now. I need to make the hole wider. Prototype and I forgot to bring in the barrel and just guessed at the hole (read: stupid me) The inner barrel should fit very nice once I drill a bit more. Maybe some tape, but leaving it to float free might be best.

August 26th, 2005, 16:51	#10
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	Done. I have 5 ready to go. I did the QC and they all fit. You have to cut the silver tube that surrounds the inner barrel back to the collar. This was just because of drill bits or a lack of. 75 dollars shipped. extra ones will be 60 each. First people get the pick of the litter.

August 29th, 2005, 19:40	#12
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	Lisa has one on the way. I already used mine at a 24hr game and it rocked. I could do a review, but I might be a little bias. Far right.

August 29th, 2005, 22:04	#13
Lisa Looking for form T-whatev Trader rating Join Date: Jun 2004 Location: Trenton	Looking forward to it, the price was right. __________________ May you live in interesting times. ASCMART, your smart choice

September 6th, 2005, 19:30	#14
Shinjin_MC Trader rating Join Date: Dec 2003 Location: sauga, on	uhm quick question how do you remove the original barrel from that foregrip attatchment part? there is this nubbie right by the gas port thing but i have no idea how the parts detach

September 6th, 2005, 19:35	#15
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	remove the forward grip. Under it is a small screw. Undo that and the barrel will slide right out. Cut the silver tube back to the collar. Insert new barrel and re tighten screw.

Hbar ~update~WITH pictures omg

Showcase