AGM Sten: Not Firing (Trigger Problem?)

Mr P · July 31st, 2012, 19:23

Recently acquired an AGM Sten and gamed it a few times (loved it). During a game recently, the gun stopped firing.

I took it apart down to it's gearbox to investigate the problem. When I attached the battery and pulled the trigger, the trigger mechanism (Which is proprietary) gives off a spark when the trigger is pulled. Anyone know of any solutions to fix this?

Would highly appreciate any help from anyone.

Cheers

-Mr P

Kingsix · July 31st, 2012, 19:25

Quote:

Originally Posted by Mr P

Recently acquired an AGM Sten and gamed it a few times (loved it). During a game recently, the gun stopped firing.

I took it apart down to it's gearbox to investigate the problem. When I attached the battery and pulled the trigger, the trigger mechanism (Which is proprietary) gives off a spark when the trigger is pulled. Anyone know of any solutions to fix this?

Would highly appreciate any help from anyone.

Cheers

-Mr P

Trigger mechanism is the switch, it might have carbon buildup or paint or other dirty crap on it clean it off it that doesn't work, file the trigger part that comes into contact with the contacts until it is shiny silver.

cadpat_tact · July 31st, 2012, 19:25

Not sure if this is the same issue, but his was solved:

http://www.airsoftcanada.com/showthr...light=agm+sten

Edit: Kingsix you beat me to it!

Mr P · July 31st, 2012, 19:28

Thanks Guys, I'll give it a go

Mr P · July 31st, 2012, 19:36

Gave it a go, the trigger piece is now shiny silver and I'm still having the same problem!

Kingsix · July 31st, 2012, 19:38

Try cleaning the two copper contact plates on the other end of the trigger.
Afterwards put a screwdriver between the two copper contacts, the mechbox should cycle.

Mr P · July 31st, 2012, 19:51

Ok, did that, and it cycles!

But now whenever I attach the battery the gun fires...and doesn't stop until i disconnect the battery :S

Kingsix · July 31st, 2012, 19:56

Are the copper contacts bent by any chance? The Current flows from one contact through the trigger to the other copper contact to complete the circuit to run the mechbox. If by any chance the Copper contacts are crossed, or touching each other the mechbox will cycle.

Mr P · July 31st, 2012, 20:07

Yep, that seems to have been the problem, gun cycles now when trigger is pulled, I'll throw some rounds down range now to see if the problem is gone.

Mr P · July 31st, 2012, 20:53

Just popped 1000 rounds through the Sten with no problems. Thank you very much for your help. It was highly appreciated!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 31st, 2012, 19:23	#1
Mr P Trader rating Join Date: Jun 2008 Location: Lower Sackville, NS	AGM Sten: Not Firing (Trigger Problem?) Recently acquired an AGM Sten and gamed it a few times (loved it). During a game recently, the gun stopped firing. I took it apart down to it's gearbox to investigate the problem. When I attached the battery and pulled the trigger, the trigger mechanism (Which is proprietary) gives off a spark when the trigger is pulled. Anyone know of any solutions to fix this? Would highly appreciate any help from anyone. Cheers -Mr P

July 31st, 2012, 19:38	#6
Kingsix Trader rating Join Date: Apr 2008 Location: Peoples Republic of Toronto	Try cleaning the two copper contact plates on the other end of the trigger. Afterwards put a screwdriver between the two copper contacts, the mechbox should cycle. __________________

July 31st, 2012, 19:56	#8
Kingsix Trader rating Join Date: Apr 2008 Location: Peoples Republic of Toronto	Are the copper contacts bent by any chance? The Current flows from one contact through the trigger to the other copper contact to complete the circuit to run the mechbox. If by any chance the Copper contacts are crossed, or touching each other the mechbox will cycle. __________________

July 31st, 2012, 19:25	#3
cadpat_tact Trader rating Join Date: Apr 2007 Location: Hamilton, ON	Not sure if this is the same issue, but his was solved: http://www.airsoftcanada.com/showthr...light=agm+sten Edit: Kingsix you beat me to it!

July 31st, 2012, 19:28	#4
Mr P Trader rating Join Date: Jun 2008 Location: Lower Sackville, NS	Thanks Guys, I'll give it a go

July 31st, 2012, 19:36	#5
Mr P Trader rating Join Date: Jun 2008 Location: Lower Sackville, NS	Gave it a go, the trigger piece is now shiny silver and I'm still having the same problem!

July 31st, 2012, 19:51	#7
Mr P Trader rating Join Date: Jun 2008 Location: Lower Sackville, NS	Ok, did that, and it cycles! But now whenever I attach the battery the gun fires...and doesn't stop until i disconnect the battery :S

July 31st, 2012, 20:07	#9
Mr P Trader rating Join Date: Jun 2008 Location: Lower Sackville, NS	Yep, that seems to have been the problem, gun cycles now when trigger is pulled, I'll throw some rounds down range now to see if the problem is gone.

July 31st, 2012, 20:53	#10
Mr P Trader rating Join Date: Jun 2008 Location: Lower Sackville, NS	Just popped 1000 rounds through the Sten with no problems. Thank you very much for your help. It was highly appreciated!

AGM Sten: Not Firing (Trigger Problem?)

Doctor's Corner