Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Airsoft Media
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

This is an PTW thread

:

Airsoft Media

Reply
 
Thread Tools
Old July 15th, 2014, 23:17   #586
Azathoth
 
Azathoth's Avatar
 
Join Date: Feb 2008
Location: Red Deer
Airsoft 11.1v is fine for cylinders M90 to M150.

Quality RC 11.1v can run every cylinder under the sun. For the TW5 you can fit a nice 100C 5000mah 11.1 in the gun and it will run nice.

Things that you should do regardless

1. Replace that god awful Tamiya connector
2. If possible replace the quick disconnect spade connectors.

Make sure your motor isn't one of those fake modified motors. I have a "modified" motor in the TW5 I am working here and the commutator/armature is a Pile of shit FCC one. The comm needs to be lathed smooth since the FCC one is rough.

The biggest annoyance with the TW5. Is getting the trigger spring, selector cylinder and ECU in without destroying the ECU. The next issue is making sure you don't pinch the wiring (The black heatshrink is on your pics) when you open / close the receiver. Then the so called "quick" cylinder swap isn't so quick. Lastly, MP-RE-005 is prone to breaking buy a couple of spares. or have one custom made from some quality tool grade steel.
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver View Post
it would appear I am not first up in this gang-bang
---
WANTED PTW Receiver PRIME, STG, Factory
Azathoth is offline   Reply With Quote
Old July 16th, 2014, 00:18   #587
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
If you run an 11.1 battery, you will increase the cycle rate. This is fine, as long as the mags can keep up. It is a known issue to chop BBs in the M-series when running full-auto and M90-M110 with heavyweight BBs. Chopping in the M-series can damage the hopup and cylinder if unattended by cleaning debris or repeated further chopping, but not the sector gear typically.

This can have the unintended consequence of also jamming the hopup in the M-series, just like what happens in the TW5. Once this occurs, then damage can result.

If you have to run a lower cylinder like M90-M110, then stick to semi. Your odds of chopping and jamming is reduced 99% right there. Pick a quality BB that feeds well. Weed out any mags that fail to feed well and discontinue using them until you rectify the feeding issue.

There are a few TW5's in Canada, I personally know of about 5 of them, and there are most certainly more than that.
__________________
Age verifier Northern Alberta

Democracy is two wolves and a sheep discussing what's for dinner.

Freedom is the wolves limping away while the sheep reloads.

Never confuse freedom with democracy.
mcguyver is offline   Reply With Quote
Old August 17th, 2014, 00:34   #588
mcguyver
 
mcguyver's Avatar
 
Join Date: Aug 2005
Location: Northern Alberta
A few updates. Added an M600V, Haley Thorntail mount and dual pad for LDI and Surefire.
Attached Images
File Type: jpg image.jpg (1.07 MB, 148 views)
__________________
Age verifier Northern Alberta

Democracy is two wolves and a sheep discussing what's for dinner.

Freedom is the wolves limping away while the sheep reloads.

Never confuse freedom with democracy.
mcguyver is offline   Reply With Quote
Old August 19th, 2014, 01:07   #589
FULLMETAL
 
FULLMETAL's Avatar
 
Join Date: Jun 2010
Location: Montreal
So you guys have the experience... is there any hope for this one? Or should I just dump it and get another motor?

https://www.youtube.com/watch?v=9Sw3...ature=youtu.be

ill open a thread on help :P

Last edited by FULLMETAL; August 19th, 2014 at 15:03..
FULLMETAL is offline   Reply With Quote
Old December 1st, 2014, 22:55   #590
SuperHog
 
SuperHog's Avatar
 
Join Date: Jul 2011
Location: Toronto, Ontario
Quote:
Originally Posted by FULLMETAL View Post
So you guys have the experience... is there any hope for this one? Or should I just dump it and get another motor?

https://www.youtube.com/watch?v=9Sw3...ature=youtu.be

ill open a thread on help :P
Are the brushes burnt and comm black and pitted? Looks like arcing.
SuperHog is offline   Reply With Quote
Old December 1st, 2014, 23:37   #591
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
looks like the comm's out of round
ThunderCactus is offline   Reply With Quote
Old April 12th, 2015, 20:30   #592
c3sk
(╯°□°)╯︵ ┻━┻
 
Join Date: Jul 2007
Location: ก็็็็็็็็็็็็็


The Goods:

Systema m16a2 07 PTW
RS Noveske upper receiver.
RS Knights Armament URX 3.1 13.5" Rail.
RS Leupold MK4 3.5-10x40 M2-TMR FDE.
RS Larue SPR-1.5 mount.
RS Aimpoint T1 Micro 4moa.
RS Knights Armament 30mm Aimpoint Scope offset mount.
RS Laser Devices Inc Dbal-i2 FDE.
RS Harris Medium Bipod.
c3sk is offline   Reply With Quote
Old April 14th, 2015, 18:30   #593
P93
 
P93's Avatar
 
Join Date: Apr 2015
Location: UK

2013 CQBR PTW

Last edited by P93; April 14th, 2015 at 18:33..
P93 is offline   Reply With Quote
Old April 15th, 2015, 21:22   #594
mr_nuts31
 
mr_nuts31's Avatar
 
Join Date: Aug 2009
Location: Petawawa, ON
Here's my TW-5 with a real steel surefire flashlight and a VFC MP-5 GBBR retractable stock(took me a bit a of work because I was an idiot):

mr_nuts31 is offline   Reply With Quote
Old June 29th, 2015, 09:46   #595
Kelvinator85
 
Join Date: Apr 2015
Hi guys can you tell me were I can buy a Systema PTW. I'm from Montreal and can't find any store that sell Systema ??
Kelvinator85 is offline   Reply With Quote
Old June 29th, 2015, 09:56   #596
BioRage
 
BioRage's Avatar
 
Join Date: Nov 2008
Location: Toronto
Send a message via Skype™ to BioRage
Quote:
Originally Posted by Kelvinator85 View Post
Hi guys can you tell me were I can buy a Systema PTW. I'm from Montreal and can't find any store that sell Systema ??
http://lmgtfy.com/?q=systema+ptw+canada
BioRage is offline   Reply With Quote
Old July 1st, 2015, 10:34   #597
Kelvinator85
 
Join Date: Apr 2015
Very funny! I already google it and I always find store that sell the Systema for twice the price or not have them in stock at all. That why I ask you where I can find one.
Kelvinator85 is offline   Reply With Quote
Old July 1st, 2015, 13:09   #598
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
I think B2 airsoft was saying they can order them in from redwolf. I doubt you'll find one on a store shelf anywhere.
ThunderCactus is offline   Reply With Quote
Old July 1st, 2015, 17:11   #599
Mike27MB
 
Mike27MB's Avatar
 
Join Date: Nov 2013
Location: S Ontario
No.
This is a "make the non-PTW users feel jealous and sad." thread.
__________________
- Muisey
Mike27MB is offline   Reply With Quote
Old October 24th, 2016, 00:35   #600
Gato
ASC's Whiny Bitch
 
Gato's Avatar
 
Join Date: Dec 2005
Location: North York, Ontario
She should arrive Wednesday, she's just beggin to be turned into a C8. I have all the CAD files for C7 and C8 trades somewhere, at least I used to, so the main bit of work is already out of the way :P




__________________
Quote:
Originally Posted by ThunderCactus View Post
Like seriously dude. The incredible lack of common sense in the question could be scientifically investigated for evidence of a black hole.
Certified Level 3.1415926 Sniper Certified
Certified Level 3.1415926 Orbital Weapons platform Certified
Gato is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Media

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 10:53.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.