7" barrels for hicapa

[mikebarkski]

i want to get a seven inch barrel to add to this list of upgrades to my TM 5.1...

-Azimuth CNC Machined Aluminum Enlarged / Flared Mag Well for Marui Hi-Capa - Dark Titanium (Pisces)
-Laylax Nine Ball Enhanced Rubber Magazine Gasket for Tokyo Marui 5.1 Hi-Capa

-Guarder Aluminum Metal Slide for MARUI / WE HI-CAPA 5.1 Airsoft GBB (OPS/Dual Ver.)
-Guarder Enhanced Recoil / Hammer Spring Set for Tokyo Marui, Hi-capa Series.
-Airsoft Surgeon Shock Buffer (For Tokyo Marui / WE Hi Capa / 1911 / MEU)

TO REPAIR AS NEEDED or good stuff to have ready for when i get a barrel
-Angel Ultimate DYNA Piston Head for WE/TM Hi-CAPA M9 P226 1911 Airsoft GBB Pistol
-Airsoft Surgeon Air Seal hop up chamber for Tokyo Marui GBB and VSR-10
-Maple Leaf DELTA System Hop Up Rubber 60 Degree for Tokyo Marui / WE / KJ GBB & VSR-10

if i get a 7" barrel will i need to find a different slide?

[mikebarkski]

or does anyone know if a 5KU CNC Wildcat Metal Slide will hide a 6 or 7 inch precision barrel?

[devbro]

I have seen ones with longer barrel which are covered by the silencer.

[mikebarkski]

ideally i'ld like to buy multiple parts at once to save on S&H, but i just affraid to get parts that dont all work together or that require further mods, unbeknownst to me...

i know that with a metal slide i cant use the stock recoil spring, so ill get the upgraded one (150%..? idk what to get there) & additionally i picked the Angel Ultimate DYNA Piston Head (that good?)in case the stock goes from the recoil/higher velocity, WILL IT?...and the mag valves will increase my fps, as will a longer barrel so i should get a 70 degree bucking (ive been told the maple leaf delta/deception are good)

I JUST DONT KNOW A GOOD ORDER OF OPERATIONS TO AVOID BUYING UNNECESSARY?INCOMPATIBLE PARTS..

1) Slide
then...
2&3)innerbarrel & bucking
then
3&4) outer barrell and compensator if needed...
or do iget the barrel first, and go with the 7 Inch PDI 6.01 then find slides for the Hi-Capa 5.1 that will cover it?

problem is that retailers dont describe their stuff too well...

[devbro]

when it comes to shop for airsoft, you need to do a lot of research to buy parts before doing anything. At times it took me weeks to just buy a single spring.

[mikebarkski]

so if i get this compensator, this outer barrel and this SLIDE, http://www.torontoairsoft.com/5KU-CN...es_p_1055.html
would they A.) work together B.) hide a 7in barrel?

[Styrak]

If the compensator is 2" long.....then yes.

[mikebarkski]

yea but i cant find retailers that give that, seemingly, crucial spec, kind of a piss off...i have found some SD wildcat slides that say they are 6 inches, but none that confirm seven...im only doing this cause i want a precision barrel that is 6 or 7 inches as i heard that the 7 add considerably force...does the 6 do the same? or is it more like the stock 5 inch in terms of performance?..i guess i could be stressin over this for nothing if the inch or 2 are not much better then the stock 5"....
...to be honnest i don't want a comp. cause they look lame...a full slide flush from top of outer barrel to bottom of recoil hammer (?if thats what its called?) would look much nicer...even this http://shop.ehobbyasia.com/media/cat...-sv_1_mark.jpg is kinda awkward...is the extra inch or two really worth that awkward look?
i reall do like the 2-tone mods (atm, mine is stock black)...