Toronto Airsoft Aimpoint Micro T1 Clone

[Handsonic]

Is it any good? I've seen threads of people discussing the quality of different T1 clones but the ones on TOA never came up.

Would you recommend this sight over an Eotech replica?

[BioRage]

I would recommend you just grab a Bushnell TRS-25, save for Holosun or a Vortex.

Those replicas are horrible, and 90% of them don't last even a year, and are not GBB shock-proof.

My personal experience of course, YMMV.

RE: Bushnell.

They go on sale here and there, you can picked them up semi-new on Canada Gun Nutz for like $100 bucks.

Bushnell Trophy TRS-25 3 MOA Red Dot Reticle Riflescope, 1x 25mm (Matte), Colors May Vary: Amazon.ca: Sports & Outdoors

[Handsonic]

Originally Posted by BioRage

I would recommend you just grab a Bushnell TRS-25, save for Holosun or a Vortex.

Those replicas are horrible, and 90% of them don't last even a year, and are not GBB shock-proof.

My personal experience of course, YMMV.

RE: Bushnell.

They go on sale here and there, you can picked them up semi-new on Canada Gun Nutz for like $100 bucks.

Bushnell Trophy TRS-25 3 MOA Red Dot Reticle Riflescope, 1x 25mm (Matte), Colors May Vary: Amazon.ca: Sports & Outdoors

Thanks! I'll look into it. Is the sight BB proof or will I need a protector?

[8bitninja]

Originally Posted by Handsonic

Is it any good? I've seen threads of people discussing the quality of different T1 clones but the ones on TOA never came up.

Would you recommend this sight over an Eotech replica?

Quality is "ok" but value for $ is not quite there. You can pickup a so-so clone mailed overseas for less than half the price usually.

Having said that, buy right buy once... unless you're like me and have nearly a dozen rifles, some of which are loaners. In that case, might as well cheap out ( except for my own )

[BioRage]

Originally Posted by Handsonic

Thanks! I'll look into it. Is the sight BB proof or will I need a protector?

All of them are based off of T1 clones, so the T1 protectors you can find from GunsModify, etc, will fit. (You can get them at airsoftparts for $10-15 bucks IIRC).

Yeah, I use a Vortex SPARC II on my primary, but if you're like 8bit with 999 guns, then you can just order from aliexpress and try your chances.

Really up to you!

[Handsonic]

Originally Posted by BioRage

All of them are based off of T1 clones, so the T1 protectors you can find from GunsModify, etc, will fit. (You can get them at airsoftparts for $10-15 bucks IIRC).

Yeah, I use a Vortex SPARC II on my primary, but if you're like 8bit with 999 guns, then you can just order from aliexpress and try your chances.

Really up to you!

Thanks! I've looked at a few reviews on the sight and it looks like it's exactly what I need. Ordered one

[BioRage]

Originally Posted by Handsonic

Thanks! I've looked at a few reviews on the sight and it looks like it's exactly what I need. Ordered one

TRS-25?

Nice!

[Handsonic]

Okay so I got the sight and it looks great and functions even better than expected! Thanks for pointing it out!

[SuperHog]

As for bb protection, I would put a bb shield in front of it.

https://www.youtube.com/watch?v=Pt5Lfaf_bbI

[Handsonic]

Originally Posted by SuperHog

As for bb protection, I would put a bb shield in front of it.

https://www.youtube.com/watch?v=Pt5Lfaf_bbI

Yeah, I'm gonna get a friend to cut a piece of polycarbonate for me