TRIAD RAIL MOUNT FOR C7/C8

Airmax · March 4th, 2008, 01:40

I would be interested in two of them. Looking forward to seeing finished work.
cheers

Zekk05 · March 4th, 2008, 14:35

mine was made to the exact specs. no trimming was required at all. its identical to the real thing and fits perfectly. im using a G&P M16A2front end on my rifle.

Toubib · March 10th, 2008, 09:29

Hi,

Depending on the materials, price, and finish, I will take two and i'm ready to pay around 50$ each.

Crunchmeister · April 5th, 2008, 15:46

Any progress on this yet?

Toubib · May 7th, 2008, 15:51

Some news about this project?

Strelok · June 9th, 2008, 20:01

Defenately would be interested in one. I've got an m16-soon to be C7a2 on the way in a few days.
________
Expert insurance

Zekk05 · June 9th, 2008, 22:44

pretty sure this can be written off as a pipe dream.

Gumby · June 10th, 2008, 12:01

Well boys, so far it does not look like the demand will be high enough to make these at a reasonable price, I have a couple more people to talk to about it, but don't get your hopes up.

Vince · June 10th, 2008, 13:04

Would take one as well, and I'm sure 2-3 guys I know would too.

Amos · June 10th, 2008, 14:15

I'd take one depending on cost...

If you made a tonne of them I'm sure jugglez @ airsoftparts.ca would be interested...

I know there's a bit of demand for these things overseas aswell... There's quite a few Canadian impressions

warbird · June 10th, 2008, 16:43

I'd get one depending on the price.

Airmax · June 13th, 2008, 03:11

Price would not bother me, I still would buy two of them.
cheers

elemar · June 19th, 2008, 02:16

Hi all, I`m from Russia and I`m interested in buying 4-5 of this rails. Price is not a problem.

super_six_four · June 19th, 2008, 02:33

if anyone finds a line on them please post, i need about 8 of them

machinehead · September 27th, 2008, 12:34

hello,

i am a machinist and i want to make a TRIAD mount for a clone im doing of a C7. does anyone have any info on it as far as drawings or such. or where i can get an original. i looked at the PFD posted before and that is a little more info than i had before.

thanks

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 4th, 2008, 01:40	#16
Airmax Trader rating Join Date: Aug 2006 Location: Langley, BC	I would be interested in two of them. Looking forward to seeing finished work. cheers __________________ That's what you said last time, Then look what happened! (LMAG) http://www.lowermainlandairsoft.ca

March 4th, 2008, 14:35	#17
Zekk05 Trader rating Join Date: Dec 2005 Location: Winnipeg	mine was made to the exact specs. no trimming was required at all. its identical to the real thing and fits perfectly. im using a G&P M16A2front end on my rifle. __________________

April 5th, 2008, 15:46	#19
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Any progress on this yet? __________________

March 10th, 2008, 09:29	#18
Toubib Trader rating Join Date: Nov 2004 Location: Sherbrooke, Québec	Hi, Depending on the materials, price, and finish, I will take two and i'm ready to pay around 50$ each.

May 7th, 2008, 15:51	#20
Toubib Trader rating Join Date: Nov 2004 Location: Sherbrooke, Québec	Some news about this project?

June 9th, 2008, 20:01	#21
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Defenately would be interested in one. I've got an m16-soon to be C7a2 on the way in a few days. ________ Expert insurance Last edited by Strelok; April 11th, 2011 at 10:40..

June 9th, 2008, 22:44	#22
Zekk05 Trader rating Join Date: Dec 2005 Location: Winnipeg	pretty sure this can be written off as a pipe dream. __________________

June 10th, 2008, 12:01	#23
Gumby Trader rating Join Date: Mar 2005 Location: Ontario, Canada	Well boys, so far it does not look like the demand will be high enough to make these at a reasonable price, I have a couple more people to talk to about it, but don't get your hopes up. __________________ We are not the Public Service of Canada, We are not just another department, We are the Canadian Forces, and our job is to be able to kill people. Airborne.

June 10th, 2008, 13:04	#24
Vince Trader rating Join Date: Feb 2006 Location: Drummondville QC	Would take one as well, and I'm sure 2-3 guys I know would too. __________________ Who wants to dine in hell?

June 10th, 2008, 14:15	#25
Amos Trader rating Join Date: Aug 2006 Location: Tokushima, Japan	I'd take one depending on cost... If you made a tonne of them I'm sure jugglez @ airsoftparts.ca would be interested... I know there's a bit of demand for these things overseas aswell... There's quite a few Canadian impressions __________________ Custom Builds: FA3674U Krinkov G3SD6

June 10th, 2008, 16:43	#26
warbird Trader rating Join Date: Oct 2006 Location: NB, Canada	I'd get one depending on the price.

June 13th, 2008, 03:11	#27
Airmax Trader rating Join Date: Aug 2006 Location: Langley, BC	Price would not bother me, I still would buy two of them. cheers __________________ That's what you said last time, Then look what happened! (LMAG) http://www.lowermainlandairsoft.ca

June 19th, 2008, 02:16	#28
elemar Trader rating Join Date: Jun 2008	TRI-AD Hi all, I`m from Russia and I`m interested in buying 4-5 of this rails. Price is not a problem.

June 19th, 2008, 02:33	#29
super_six_four Trader rating Join Date: Sep 2007 Location: Calgary, Alberta	if anyone finds a line on them please post, i need about 8 of them

September 27th, 2008, 12:34	#30
machinehead Trader rating Join Date: Sep 2008	hello, i am a machinist and i want to make a TRIAD mount for a clone im doing of a C7. does anyone have any info on it as far as drawings or such. or where i can get an original. i looked at the PFD posted before and that is a little more info than i had before. thanks Last edited by machinehead; January 17th, 2009 at 09:31..