This is the KJ 10/22 thread

Viperfish · September 13th, 2011, 20:31

OH! alright my bad i got ya. Well if thats the case then thats the only thing to keep in mind.

If i were him id go with the long mag one for starts.

Hurley895 · September 26th, 2011, 20:56

guys I have the falcon barrel kit. Anyone have a good video of removeal of the barrel? I ask this not becuase I can't figure it out my self but it's nice to see someone else do it first.

Styrak · September 26th, 2011, 22:12

What do you need help with?

Hurley895 · September 27th, 2011, 11:10

Well I installed the falcon kit.

In short it sucks.

I've lost fps and the shorts are very random. The hop up rubber with the kit was mis-cast (I had to poke out the barrel hole). The barrel extender was to small to fit the inner barrel so I had to drill it out.

I now have to take this garbage out of my gun.

(all shots fired with duster)

Strelok · September 27th, 2011, 12:47

What velocity do you guys normally get with duster?

Thanks!

Hurley895 · September 27th, 2011, 12:59

Me I get normal outdoor aeg fps (~400). Propane is a lot higher and the stock hop up is ineffective. (450 to 500). I use a stock mag.

Viperfish · September 27th, 2011, 23:30

Quote:

Originally Posted by Strelok

What velocity do you guys normally get with duster?

Thanks!

FPS with duster on .20s will range from 380-400 depending on air temp and your rof. with a tightbore it will rise to 400-420 depending. Works wonders for indoor games on super hot days.

With duster you will also find your bolt will lock back far less then on propane when its hot outside. Just make sure before you go from one gas to another that you open up your mags and clean them out, otherwise you may notice your FPS spike drastically from 380 one shot to 450 on the next.

shiftsup · October 1st, 2011, 20:57

Has anyone attempted to install a KJ 10/22 into an M1 Carbine Para stock?

Anyone?

Strelok · October 1st, 2011, 22:11

I'd do it if someone would link me to a source to get them from

shiftsup · October 2nd, 2011, 14:32

Quote:

Originally Posted by Strelok

I'd do it if someone would link me to a source to get them from

I know www.sofmilitary.co.uk offers them in their re-enactors catalogue for £150.00 which is ~$245 CDN.

Marstar had them for $325 CDN but they have been out of stock for some time.

Lots of US retailers sell them for ~$175 USD but from what I have read most of them won't ship to Canada (cheaperthandirt and so on).

It wouldn't hurt to ask your local firearm store if they can get them.

Disco_Dante · October 5th, 2011, 12:35

So i'm a bit stuck guys. I've got it taken apart down to the barrel and hop up, and its this metal lump attached to the barrel. There's no visible screws and pins, and I've tried twisting the little brass ring thats between the barrel and the lump of the hop up unit, but I don't want to apply too much pressure in case I twist something inside the unit.

Am I even doing this right? Should I be trying to remove this brass nut?

Hurley895 · October 5th, 2011, 14:07

Is it the large brass nut with the barrel running though it? If so then yes. It has two flat sides.

Disco_Dante · October 5th, 2011, 14:25

Yeah thats the one! I was worried I'd tear the rubber or something if i twisted it too hard. Thanks a lot Hurley!

tdunn · October 25th, 2011, 16:29

Has anyone considered cutting down and retreading the outer barrel say 5mm longer than the inner. Then use duster and have a serious CQB unit, that should still have good accuracy at range.

D.Kovacs · October 25th, 2011, 21:12

10/22 bullpup kit anyone? illegal to use on a real 10/22, but hot damn the possibilities.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 26th, 2011, 20:56	#152
Hurley895 The Costco Kid Trader rating Join Date: Jul 2010 Location: St. John's NF	guys I have the falcon barrel kit. Anyone have a good video of removeal of the barrel? I ask this not becuase I can't figure it out my self but it's nice to see someone else do it first. __________________ Type 2 airsoft player.

September 26th, 2011, 22:12	#153
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	What do you need help with? __________________ Airsoft Sales and Repair/Upgrade Services

September 27th, 2011, 11:10	#154
Hurley895 The Costco Kid Trader rating Join Date: Jul 2010 Location: St. John's NF	Well I installed the falcon kit. In short it sucks. I've lost fps and the shorts are very random. The hop up rubber with the kit was mis-cast (I had to poke out the barrel hole). The barrel extender was to small to fit the inner barrel so I had to drill it out. I now have to take this garbage out of my gun. (all shots fired with duster) __________________ Type 2 airsoft player.

September 27th, 2011, 12:47	#155
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	What velocity do you guys normally get with duster? Thanks!

September 27th, 2011, 12:59	#156
Hurley895 The Costco Kid Trader rating Join Date: Jul 2010 Location: St. John's NF	Me I get normal outdoor aeg fps (~400). Propane is a lot higher and the stock hop up is ineffective. (450 to 500). I use a stock mag.

October 1st, 2011, 22:11	#159
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	I'd do it if someone would link me to a source to get them from

October 5th, 2011, 12:35	#161
Disco_Dante Trader rating Join Date: Oct 2007 Location: GTA	So i'm a bit stuck guys. I've got it taken apart down to the barrel and hop up, and its this metal lump attached to the barrel. There's no visible screws and pins, and I've tried twisting the little brass ring thats between the barrel and the lump of the hop up unit, but I don't want to apply too much pressure in case I twist something inside the unit. Am I even doing this right? Should I be trying to remove this brass nut? __________________ Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life.

October 5th, 2011, 14:07	#162
Hurley895 The Costco Kid Trader rating Join Date: Jul 2010 Location: St. John's NF	Is it the large brass nut with the barrel running though it? If so then yes. It has two flat sides. __________________ Type 2 airsoft player.

October 5th, 2011, 14:25	#163
Disco_Dante Trader rating Join Date: Oct 2007 Location: GTA	Yeah thats the one! I was worried I'd tear the rubber or something if i twisted it too hard. Thanks a lot Hurley! __________________ Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life.

October 25th, 2011, 16:29	#164
tdunn Trader rating Join Date: Oct 2011 Location: Winnipeg	Has anyone considered cutting down and retreading the outer barrel say 5mm longer than the inner. Then use duster and have a serious CQB unit, that should still have good accuracy at range.

October 25th, 2011, 21:12	#165
D.Kovacs Trader rating Join Date: Jun 2009 Location: Winnipeg	10/22 bullpup kit anyone? illegal to use on a real 10/22, but hot damn the possibilities.

This is the KJ 10/22 thread

Airsoft Guns Discussion