July 9th, 2015, 18:12 | #1441 |
willing to perform services in a dark alley that may or may not leave you satisfied for a title. GFE = 1, looks = 2, BBFS for an extra $50.
|
Strelok I've been eying those for my russian/opfor loadout, what were the lemon issues specifically?
|
July 9th, 2015, 20:05 | #1442 |
@Biorage:
Nah, the PMm looks ugly as hell to me, and I've got a set of bakelite grips and a holster on the way for this. Gotta have that proper cold war Mak look. Though, I'm tempted to grab one just for the russian sidearm lineage I seem to be gathering. @localfreerider From what I've read. Its been the following: The valve knocker and magazine doesn't properly line up in some models. Making the gun useless as it can't run enough gas through the system. Some have had very very tight tolerances. Which I can see in mine, but not nearly as bad as some people have reported. Some folks have said that its difficult to get the magazine in, drop the slide or even use the magazine release as the springs are very stiff. Mine has a bit of laggy slide travel, as the inside of the slide cavity is kinda rough. I'm gonna disassemble it and polish it up once my warranty is over and see how that fares. There were also some other issues where the gun won't reset unless the slide is pushed in. Which it would just end up venting gas. Haven't seen this with mine yet. And lastly. Trigger bar and hammer sear issues. Which I can very well see happening with this in the future. The trigger bar looks and feels cheap. And the it creaks when you fire it in double action. I would absolutely not recommend testing the trigger when on safe with this as it could very well snap. I lubricated every little bit of this gun with superlube and silicon oil and seemed to have remedied the creep and creak. Feels a lot smoother. Hopefully this will be enough to keep stress off of the bar. Once my new propane adapter comes in I'll make a firing video of it. Heres a pic of the slav pistol family so far. Last edited by Strelok; July 9th, 2015 at 21:11.. |
|
July 10th, 2015, 13:53 | #1443 |
__________________
Asahi WA2000 DX |
|
July 10th, 2015, 13:57 | #1444 |
Very nice George and Strelok.
|
|
July 12th, 2015, 17:11 | #1445 |
__________________
Asahi WA2000 DX |
|
July 12th, 2015, 22:18 | #1446 |
Slow mo.
|
When you say Prime, is it TM or WA based?
__________________
The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr. |
July 12th, 2015, 23:06 | #1447 |
July 13th, 2015, 02:53 | #1448 |
It's WA based.
Wolf
__________________
Asahi WA2000 DX |
|
July 23rd, 2015, 19:10 | #1449 |
__________________
Asahi WA2000 DX |
|
July 31st, 2015, 14:16 | #1450 |
Glock SAI
SAI Glock 17 Tier1 (TM/GunsModify)
Frost |
|
August 3rd, 2015, 03:46 | #1451 |
2 x GForce19
__________________
|
|
August 9th, 2015, 22:52 | #1452 |
"bb bukakke" KING!
|
before it gets all scratched up and worn from use.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
August 10th, 2015, 14:39 | #1453 |
__________________
"...However, if preserving the integrity of the gun was the only factor at play then clearly the best option would be to run a 0.0v Lipo and run around shouting 'bang'." |
|
August 10th, 2015, 15:52 | #1454 |
That m84 on the right looks real nice. Whats the deal with that one?
|
|
August 10th, 2015, 16:18 | #1455 | |
Quote:
Just a simple WE M84 with aftermarket wood grip. Unfortunately no trades, so I opted not to get a grip with Beretta medallions.
__________________
"...However, if preserving the integrity of the gun was the only factor at play then clearly the best option would be to run a 0.0v Lipo and run around shouting 'bang'." |
||
|
Bookmarks |
|
|