|
|
|
October 29th, 2008, 21:56
|
#121 |
|
just adding some more pics.....got bored sitting around...
   
|
|
|
|
October 29th, 2008, 21:58
|
#122 |
|
That Hicapa is probably the sexiest hicapa I've ever seen...
And I love the grips and the comp on the 1911. What are the grips made of?
__________________
I love freedom and consequently America |
|
|
|
|
October 29th, 2008, 22:13
|
#123 |
|
|
Some sort of pressure formed rosewood or something....got it off eBay...
|
|
|
|
|
October 31st, 2008, 19:28
|
#124 |
|
I'm new to 1911s, so could you please tell me how to remove the trigger? I removed the grip safety, main spring housing, all the sears but couldnt figure how to get the trigger out of its place.
|
|
|
|
|
|
October 31st, 2008, 19:44
|
#125 |
|
GBB Whisperer
|
Remove the mag catch as well.
|
|
|
|
|
October 31st, 2008, 20:31
|
#126 |
|
Thats it? Thanks for the quick answer
 Edit: The screw thats on the mag release is too strong and it chips away easily, can I have to remove it another way? Sorry for my newb questions but I really hate the standard 1911 trigger. Last edited by scarletsnake; October 31st, 2008 at 20:37.. |
|
|
|
|
|
October 31st, 2008, 23:38
|
#127 |
|
GBB Whisperer
|
Push it in before turning it counter-clockwise. It's spring loaded. :P
|
|
|
|
|
November 3rd, 2008, 10:03
|
#128 | |
|
Quote:
So I've stripped the gun of its mag catch button, but the hammer's black string-like thing that hangs down from where the grip safety used to be keeps getting in the way... I've taken all of the visible sears out, how do I disassemble the hammer & hammer assembly? Sorry for wasting your time with my stupid questions, but I'd be grateful if you could help me more
|
||
|
|
|
|
November 3rd, 2008, 14:03
|
#129 |
|
Here snake
http://airsoft-barracks.com/forums/i...howtopic=522.0 A complete disassembly guide for the TM 1911, hope this helps.
__________________
bLaRg. |
|
|
|
|
November 3rd, 2008, 14:34
|
#130 |
|
Thanks man
Im fresh outta allan keys, so will try tomorrow BTW, the front screw at my frame (The one that the guy refers to as : the little Phillips head screw in the front of the frame, located inside the channel that the recoil spring sits in.) isnt moving, and I've applied a serious amount of force to it. Is there something I'm missing? |
|
|
|
|
|
November 3rd, 2008, 14:55
|
#131 |
|
GBB Whisperer
|
A bit more muscle on the arms.
... seriously though, it shouldn't be that hard to budge that screw. It's on very loose. btw, that "black string-like thing" is called the hammer strut. |
|
|
|
|
November 3rd, 2008, 15:20
|
#132 |
|
Thanks guys
I have the ehobby custom one, so they might have screwed it harder than it was supposed to be on the standard marui one. I work out regularly so I have some strength, but dang I've started to chip away at the edges. Anyway, thanks again, I'll hopefully have stripped the whole dang thing down by tomorrow. Edit: I almost hurt my wrist trying to get the screw off. It wont budge 
Last edited by scarletsnake; November 3rd, 2008 at 15:35.. |
|
|
|
|
|
November 3rd, 2008, 18:15
|
#133 |
|
|
Just to make sure we are talking about the same thing, its the magcatch retaining pin thing thats accessed from the right side of the pistol, with the slotted head? You are supposed to push in then turn counterclockwise by just about 90 degree. Then you press the mag release from the left and it should wiggle out....
|
|
|
|
|
November 3rd, 2008, 19:44
|
#134 |
|
Lol, your 1911's look like everything except an A1.
__________________
"Lieutenant John Chard: The army doesn't like more than one disaster in a day. Bromhead: Looks bad in the newspapers and upsets civilians at their breakfast." - ZULU (1964) |
|
|
|
|
November 4th, 2008, 11:47
|
#135 |
|
http://i235.photobucket.com/albums/e...p/fabb060a.jpg
Im talking about this little screw. Its not movin
|
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
