This is the KJ 10/22 thread

Styrak · July 22nd, 2011, 03:25

Well, I had my first failure of my 10/22. Read on because it's not what you think.

We played on Sunday, and I was using my 10/22 and pistols. During a game the bolt seemed like it seized up. I could rack it but it would not fully seat into battery. When the bolt was back the nozzle seemed very hard to move.

I said oh well, guess I'll just use my pistols for the rest of the day.

Fast forward to tonight when I actually took it apart. I found out the piston and cylinder o-ring were BONE DRY! Yes folks, I had not used oiled in my gun since I got it (well maybe the first mag fill or two, or one in between somewhere).

So it was totally user error. Didn't have to take it apart to remedy it but that's just how it happened. Added oil to the oring and piston and it cycles like a dream again.

Derp.

baker_Jeff · July 23rd, 2011, 21:13

I should have the M1 Carbine sights and straight mags on Tuesday. Also talking with Cradle Airsoft about reducers

Jeff

Viperfish · July 23rd, 2011, 21:27

There is no need for a reducer. simply run it on duster. works like a dream and gives a good gameable FPS. Ill have a full post about FPS tests on both propane and duster with normal and tight bore barrel.

Ill have it up soon.

Strelok · July 28th, 2011, 18:05

Soon to be a member of the KC02 club!

lleets · July 29th, 2011, 12:51

Just got mine, luffit!!! Now, what are you guys using for pouches?

Nevermind... found out that my pistol mag pouches work perfectly!

And if you double up the mags they'll fit right into a single m4 pouch.

Can't wait to game the thing!

Styrak · July 29th, 2011, 13:12

Whatever I have available. They're much smaller and different dimension than any other rifles mags so....try something and see what works.

baker_Jeff · July 29th, 2011, 16:29

Quote:

Originally Posted by Viperfish

There is no need for a reducer. simply run it on duster. works like a dream and gives a good gameable FPS. Ill have a full post about FPS tests on both propane and duster with normal and tight bore barrel.

Ill have it up soon.

Totally weird and who knows how it happened, but I chrono'd mine on propane AND duster for a night game, and it was shooting hot through the Paintball chrono they had at the field

Styrak · July 29th, 2011, 16:53

Quote:

Originally Posted by baker_Jeff

Totally weird and who knows how it happened, but I chrono'd mine on propane AND duster for a night game, and it was shooting hot through the Paintball chrono they had at the field

What do you consider "hot"? You need to list numbers.

LegioXIII · July 30th, 2011, 13:09

Quote:

Originally Posted by Styrak

It's funny that anyone would be interested in a 22LR gun.

But it actually looks like a decent gun, not that anyone would actually use the real one in any kind of situation other than to shoot gophers or cans

The Israelis had a use for the Ruger 10/22:

Ruger 10/22 Suppressed Sniper Rifle

Strelok · July 30th, 2011, 13:40

So,

Buying the gun next week, got the sniper kit coming in the following month hopefully.

Anyone care to run a quick crash-course of info on the gun? Just basic shit like maitenance and things to do/not do and etc.

Thanks

hattrick · July 30th, 2011, 14:24

Quote:

Originally Posted by LegioXIII

The Israelis had a use for the Ruger 10/22:

Ruger 10/22 Suppressed Sniper Rifle

The israelis could kill a man with a stuffed donkey if need be....

Strelok · August 6th, 2011, 04:54

So, whats the benefit of having a steel bolt for this thing? Putting together a 'to buy' list for when mine comes in. Getting the RATech bolt, mag release, inner barrel/hopup unit... But then theres that steel bolt. Just curious if it would be worth the 80 some dollars to have that installed in my gun.

Styrak · August 6th, 2011, 05:18

I think it would be a disadvantage. Heavier bolt = worse performance and gas consumption.

By the way, why are you getting the inner barrel? It's already close to limits, and WAAAAY over limits with an extended tightbore. What are the sniper limits where you are?

Rob121 · August 6th, 2011, 11:31

Has anybody had issues with mags failing? I have four mags that have now failed. One even went off in my vest.

teriases · August 6th, 2011, 13:18

Quote:

Originally Posted by Rob121

Has anybody had issues with mags failing? I have four mags that have now failed. One even went off in my vest.

Yea... My mag is failing too. I checked it yesterday put some gas in it and it's leaking like mad... ;( need to open it to take a look

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 22nd, 2011, 03:25	#91
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Well, I had my first failure of my 10/22. Read on because it's not what you think. We played on Sunday, and I was using my 10/22 and pistols. During a game the bolt seemed like it seized up. I could rack it but it would not fully seat into battery. When the bolt was back the nozzle seemed very hard to move. I said oh well, guess I'll just use my pistols for the rest of the day. Fast forward to tonight when I actually took it apart. I found out the piston and cylinder o-ring were BONE DRY! Yes folks, I had not used oiled in my gun since I got it (well maybe the first mag fill or two, or one in between somewhere). So it was totally user error. Didn't have to take it apart to remedy it but that's just how it happened. Added oil to the oring and piston and it cycles like a dream again. Derp. __________________ Airsoft Sales and Repair/Upgrade Services Last edited by Styrak; July 22nd, 2011 at 03:53..

July 23rd, 2011, 21:13	#92
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	I should have the M1 Carbine sights and straight mags on Tuesday. Also talking with Cradle Airsoft about reducers Jeff __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

July 29th, 2011, 12:51	#95
lleets Trader rating Join Date: Feb 2011 Location: Region of Peel	Just got mine, luffit!!! Now, what are you guys using for pouches? Nevermind... found out that my pistol mag pouches work perfectly! And if you double up the mags they'll fit right into a single m4 pouch. Can't wait to game the thing! __________________ How 'bout you just suck my A$$.... Last edited by lleets; July 29th, 2011 at 16:51..

July 28th, 2011, 18:05	#94
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Soon to be a member of the KC02 club!

July 29th, 2011, 13:12	#96
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Whatever I have available. They're much smaller and different dimension than any other rifles mags so....try something and see what works. __________________ Airsoft Sales and Repair/Upgrade Services

July 30th, 2011, 13:40	#100
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	So, Buying the gun next week, got the sniper kit coming in the following month hopefully. Anyone care to run a quick crash-course of info on the gun? Just basic shit like maitenance and things to do/not do and etc. Thanks

August 6th, 2011, 04:54	#102
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	So, whats the benefit of having a steel bolt for this thing? Putting together a 'to buy' list for when mine comes in. Getting the RATech bolt, mag release, inner barrel/hopup unit... But then theres that steel bolt. Just curious if it would be worth the 80 some dollars to have that installed in my gun.

August 6th, 2011, 05:18	#103
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	I think it would be a disadvantage. Heavier bolt = worse performance and gas consumption. By the way, why are you getting the inner barrel? It's already close to limits, and WAAAAY over limits with an extended tightbore. What are the sniper limits where you are? __________________ Airsoft Sales and Repair/Upgrade Services

August 6th, 2011, 11:31	#104
Rob121 Trader rating Join Date: May 2010 Location: Niagara	Has anybody had issues with mags failing? I have four mags that have now failed. One even went off in my vest.

This is the KJ 10/22 thread

Airsoft Guns Discussion