FAQ for Tokyo Marui Hi-Capa, 2011, 1911, MEU & Detonics type variants

[intinerious]

Originally Posted by ILLusion

Unscrew the strike face from the shaft. Place the shims under the strike face. Screw back together. I'd recommend some loctite to seal her up.

The extra O-ring is just a replacement in case it crosses your threads and cuts it up.

Thanks for the info and Merry Christmas!:smile:

[AXe Hound]

ok I got a new outer barrel,slide and comp for my TM hi capa and something is out of places .the hop up and outer barrel are fitting loosely together.the outer barrel moves off of the hop up with out any effort.the kit came with some
O-rings but i have no idea as to where they go.I am completely lost.
can any one help.

[AXe Hound]

I got it

[ILLusion]

Originally Posted by AXe Hound

ok I got a new outer barrel,slide and comp for my TM hi capa and something is out of places .the hop up and outer barrel are fitting loosely together.the outer barrel moves off of the hop up with out any effort.the kit came with some
O-rings but i have no idea as to where they go.I am completely lost.
can any one help.

Whenever seeking technical help of any kind, it will help greatly if you identify what brands and models you are referring to, so that the people who help you have a better idea of what it is that you're referring to.

Originally Posted by AXe Hound

I got it

So what was it that fixed it?

[AXe Hound]

Originally Posted by ILLusion

Whenever seeking technical help of any kind, it will help greatly if you identify what brands and models you are referring to, so that the people who help you have a better idea of what it is that you're referring to.



So what was it that fixed it?

its a 5KU set and I really did not fix it I just put all the parts together in the slide and placed them on the frame. its OK I guess but the outer barrel and hop up don't fit snug.
the hop up moves around the outer barrel allot and theres nothing to hold it from doing it.the build is a TM hi capa 5.1 if that helps.

[ILLusion]

Originally Posted by AXe Hound

its a 5KU set and I really did not fix it I just put all the parts together in the slide and placed them on the frame. its OK I guess but the outer barrel and hop up don't fit snug.
the hop up moves around the outer barrel allot and theres nothing to hold it from doing it.the build is a TM hi capa 5.1 if that helps.

I haven't used 5KU before, so I couldn't provide any help on it. In this case, some pictures of the problem in question would probably go a long way more than words can.

[AXe Hound]

i don't got my camera but I will post them ASAP

[StrikeFreedom]

I'm rather curious as well. Why do some kits come with a metal/rubber o-ring?

[AXe Hound]

my kit came with two rubber o-rings and also a metal ring of the same size.

[quote=StrikeFreedom;1380117]I'm rather curious as well. Why do some kits come with a metal/rubber o-ring?

[ILLusion]

Those o-rings are to be mounted at the base of the outer barrel where the compensator attaches. It is covered by the sheathe once it is fully closed. It keeps the sheathe from falling off the base.

The metal ring acts as a bushings to stabilize your inner barrel within the outer barrel. This gives it a more precise fitment, resulting in more consistent shots. Usually, these are precision fit for specific inner barrel brands, as there is a +/- 0.01mm variance in outer diameter across brands.

[AXe Hound]

thanks illusion

[ILLusion]

Here's a photo of placement:

[StrikeFreedom]

Originally Posted by ILLusion

The metal ring acts as a bushings to stabilize your inner barrel within the outer barrel. This gives it a more precise fitment, resulting in more consistent shots. Usually, these are precision fit for specific inner barrel brands, as there is a +/- 0.01mm variance in outer diameter across brands.

So you put the metal ring over the inner barrel before inserting it into the outer barrel? Or does it go where the compensator threads into?

[ILLusion]

Originally Posted by StrikeFreedom

So you put the metal ring over the inner barrel before inserting it into the outer barrel?

Correct. It is to shim the inner barrel to the outer barrel. At least that's how the shims I've requested are to be used. I don't know if other resellers are packaging their kits with a ring for another purpose. A photo would speak a thousand words.

Sorry, I was not clear in describing the above picture. That picture is for o-ring placement only.

[StrikeFreedom]

Thanks for the clarification. I'm just wondering though, whether it yields more consistent shots with the inner barrel "sticking" to the outer barrel (using the shim) or just letting it free float. Even in a fixed barrel setup, the compensator & outer barrel move a bit as the slide cycles especially when it slams forward, which in turn can alter the inner barrel if the shim was in place?