Tanio Koba / KJW M4 GBBR Basic Information and FAQ

audi_bhoy · February 20th, 2012, 10:42

Updates, I tried replacing the small O-Ring provided with the new bolt floating valve with the Cradle Huge O-Ring, and the FPS is still low, so I suspect that it's the O-ring that prevents the CVR to be properly adjusted, I will work this out next week-end !

Amos · February 20th, 2012, 12:17

you need to chop a bit of the bolt on the nozzle on the V2 bolts for the cradles to work properly.

audi_bhoy · February 20th, 2012, 21:34

I don'tget it, do you have any picture of that you could share?

Thanks

Rommen · February 26th, 2012, 14:14

In the search for STANAG magazines, I came across this: http://www.law-airsoft.com/en/boutiq...=2&rgt=3&id=26

Has anyone heard of these, or maybe even own a few? I'm really interested in them, as pulling the thermold mags out of a double pouch can be annoying. If I ordered these they should make it through customs right? Seeing as they don't use the real STANAG shell.

audi_bhoy · February 26th, 2012, 21:35

They are juste releasing those, One thing for sure, it will probably not hold as much gas as the Thermold's. It now makes about 15 months that they plan on producing those mags, and it seems that they will be ready to ship this March, AFAIK.

Rommen · February 27th, 2012, 19:07

So is anyone planning on picking the mags up? Or is there some looming problem which I can't see...

Heerven · February 27th, 2012, 20:47

mmm ... I<m waiting you try them first

Seriously it might interesting but I still need to see review first (construction, capacity, durability)

audi_bhoy · February 28th, 2012, 18:12

I've still no idea where to chop the nozzle on the V2 Bolts to have the Cradle Velocity Reducer working properly, does anyone have a picture on this ?

mrpie123 · March 4th, 2012, 10:04

+1 on audi_bhoy,
i was going to get the cradle velocity reducer but now im hesistant.....
is cradle going to make another video showing us how to install it on the version 2 bolt?
sorry im a noob at gbbrs =P

Saberwing · March 8th, 2012, 13:39

Wow it's been a while since I've posted. Got sucked into the university world since it was too cold out for my M4.

You have to cut the nozzle of the V2 bolt for the CR velocity reducer to work? I've been using it in mine with no mods and it works fine?

I won't be getting the STANAG magazines just yet... Considering they want 214 Euros for 5... which is $281 at the current rate... I have better stuff I could get for my rifle with that money.

SKI · March 9th, 2012, 19:25

Quote:

Originally Posted by Heerven

mmm ... I<m waiting you try them first

Seriously it might interesting but I still need to see review first (construction, capacity, durability)

Looking at the pictures on their site, it looks like they should have similar characteristics as the factory Thermolds. It doesn't look like a shell like WE so hoping the capacity is good.

Heerven · March 14th, 2012, 13:23

Hi
since I wanted to replace my O-ring (external) on my filling valve, I was enable to find them in any store in Canada. I don't want to buy the entire fill valve but just the O-ring. All of them are missing on my mags. I check on google and I found this guy who replaced all the O-ring with Teflon tape (or plumber tape). It seems to work great. He even apply it on threads of the fill valve. I wonder if anyone here have already tried this technic?
Does it last Or I have to do the same thing every month. This solution would be super cheap in comparison to buy O-ring all the time. Anyway, I hope someone can give me his opinion on this.
Thanks

Rommen · March 14th, 2012, 13:50

Quote:

Originally Posted by Heerven

Hi
since I wanted to replace my O-ring (external) on my filling valve, I was enable to find them in any store in Canada. I don't want to buy the entire fill valve but just the O-ring. All of them are missing on my mags. I check on google and I found this guy who replaced all the O-ring with Teflon tape (or plumber tape). It seems to work great. He even apply it on threads of the fill valve. I wonder if anyone here have already tried this technic?
Does it last Or I have to do the same thing every month. This solution would be super cheap in comparison to buy O-ring all the time. Anyway, I hope someone can give me his opinion on this.
Thanks

You should be able to get replacement o-rings from a local hobby, hardware or plumbing store. Just bring the valve with you and see if they fit. Teflon tape will work, put there are no guarantees it will be more permanent than a lubed o-ring. Sealing it with something like blue gasket maker or silicone adhesive sealant should seal it forever, but also 'glue' the fill valve in... bad should you ever need to take it out. Personally, I'd just replace the o-rings.

IggysPiggy · March 14th, 2012, 14:58

Huh funny im running two v2 bolts with cvr's and no issues ones set cqb at about 360,others 430 ish no issues ive seen.

Amos what exactly did you have to nod and in what way?

Heerven · March 14th, 2012, 17:03

Thanks for the reply Rommen.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 20th, 2012, 12:17	#692
Amos Trader rating Join Date: Aug 2006 Location: Tokushima, Japan	you need to chop a bit of the bolt on the nozzle on the V2 bolts for the cradles to work properly. __________________ Custom Builds: FA3674U Krinkov G3SD6

February 27th, 2012, 20:47	#697
Heerven Trader rating Join Date: Nov 2009 Location: Montréal	mmm ... I<m waiting you try them first Seriously it might interesting but I still need to see review first (construction, capacity, durability) __________________ We will find a way.

March 8th, 2012, 13:39	#700
Saberwing Trader rating Join Date: Mar 2007 Location: London, ON	Wow it's been a while since I've posted. Got sucked into the university world since it was too cold out for my M4. You have to cut the nozzle of the V2 bolt for the CR velocity reducer to work? I've been using it in mine with no mods and it works fine? I won't be getting the STANAG magazines just yet... Considering they want 214 Euros for 5... which is $281 at the current rate... I have better stuff I could get for my rifle with that money. __________________ KJW Mk18 MOD1 BLOCK 2 - Well VSR-10 - Les Baer Ultimate Recon Last edited by Saberwing; March 8th, 2012 at 13:42..

February 20th, 2012, 10:42	#691
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	Updates, I tried replacing the small O-Ring provided with the new bolt floating valve with the Cradle Huge O-Ring, and the FPS is still low, so I suspect that it's the O-ring that prevents the CVR to be properly adjusted, I will work this out next week-end !

February 20th, 2012, 21:34	#693
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	I don'tget it, do you have any picture of that you could share? Thanks

February 26th, 2012, 14:14	#694
Rommen Trader rating Join Date: Jul 2011 Location: Mississauga, Ontario.	In the search for STANAG magazines, I came across this: http://www.law-airsoft.com/en/boutiq...=2&rgt=3&id=26 Has anyone heard of these, or maybe even own a few? I'm really interested in them, as pulling the thermold mags out of a double pouch can be annoying. If I ordered these they should make it through customs right? Seeing as they don't use the real STANAG shell.

February 26th, 2012, 21:35	#695
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	They are juste releasing those, One thing for sure, it will probably not hold as much gas as the Thermold's. It now makes about 15 months that they plan on producing those mags, and it seems that they will be ready to ship this March, AFAIK.

February 27th, 2012, 19:07	#696
Rommen Trader rating Join Date: Jul 2011 Location: Mississauga, Ontario.	So is anyone planning on picking the mags up? Or is there some looming problem which I can't see...

February 28th, 2012, 18:12	#698
audi_bhoy Trader rating Join Date: Mar 2009 Location: Trois-Rivières	I've still no idea where to chop the nozzle on the V2 Bolts to have the Cradle Velocity Reducer working properly, does anyone have a picture on this ?

March 4th, 2012, 10:04	#699
mrpie123 Trader rating Join Date: Oct 2011	+1 on audi_bhoy, i was going to get the cradle velocity reducer but now im hesistant..... is cradle going to make another video showing us how to install it on the version 2 bolt? sorry im a noob at gbbrs =P

March 14th, 2012, 13:23	#702
Heerven Trader rating Join Date: Nov 2009 Location: Montréal	Hi since I wanted to replace my O-ring (external) on my filling valve, I was enable to find them in any store in Canada. I don't want to buy the entire fill valve but just the O-ring. All of them are missing on my mags. I check on google and I found this guy who replaced all the O-ring with Teflon tape (or plumber tape). It seems to work great. He even apply it on threads of the fill valve. I wonder if anyone here have already tried this technic? Does it last Or I have to do the same thing every month. This solution would be super cheap in comparison to buy O-ring all the time. Anyway, I hope someone can give me his opinion on this. Thanks __________________ We will find a way.

March 14th, 2012, 14:58	#704
IggysPiggy Trader rating Join Date: Sep 2007	Huh funny im running two v2 bolts with cvr's and no issues ones set cqb at about 360,others 430 ish no issues ive seen. Amos what exactly did you have to nod and in what way?

March 14th, 2012, 17:03	#705
Heerven Trader rating Join Date: Nov 2009 Location: Montréal	Thanks for the reply Rommen. __________________ We will find a way.

Tanio Koba / KJW M4 GBBR Basic Information and FAQ

Airsoft Guns Discussion