This is GBBR thread.

The Chad · February 21st, 2013, 20:58

Not done yet but one full gun so far. GBBRs are a pleasure to build from the ground up. No magpul in sight!
It's all g&p woc minus some rs parts and the body.

http://airsoftcanada.com/showthread.php?t=140693
.
image.jpg

Aper · February 21st, 2013, 21:24

Quote:

Originally Posted by Shirley

He's asking what kind. Its a modified redimag. The opening makes it lighter.

haha damn misread ... my bad.

Also Chad, why do you put that rear sight so far away ?

The Chad · February 21st, 2013, 21:32

Elcan will go behind, once i get one. It belongs on the C7 upper I'm working on but the only other sight I have is a crappy aeg one.

jtjcheng · February 24th, 2013, 03:43

Me. I run standard M4 and Mk10 Mod1 GBBRs. You're not alone now.

Quote:

Originally Posted by Eeyore

Does anyone in Canada run a gbbr that doesn't have a Magpul stock on it besides me?

jtjcheng · February 24th, 2013, 03:51

My long-time buddy serves me for many milsims.

VFC Mk18 Mod1 GBBR.

Shirley · February 24th, 2013, 05:05

Why is there so many elastics? The one on PEQ, Eotech, and pistol grip.
Usually RS operators use zipties for the PEQ, the optics, I haven't seen anyone do that for zipties though. Optics should always be tight on..

Aper · February 24th, 2013, 09:40

Normally you use elastics on the pistol grip / foward vertical grip for a better grip / non-slipperish grip. AS for the one on the stock it's maybe to make sure the release catch doesn't wobble and by that making some noise.

As for the others (An/Peq, EOTech), I have no fucking clue lol.

The Chad · February 24th, 2013, 09:56

Good mount hardware shouldn't need zip ties or elastics. I'm afraid to leave elastics on anything too long, I've had multiple items react with the rubber and the elastic became part of it. Putting an elastic on the stock is good when you need to be sneaky, I agree.

Hockey tape is decent for added grip, stippling though time consuming, is probably the best.

Can anyone tell me why there is two flashlights on jarhead's perty gun?

AngelusNex · February 24th, 2013, 10:03

Quote:

Originally Posted by The Chad

Can anyone tell me why there is two flashlights on jarhead's perty gun?

Because "Two is one and one is none". It's incase one gets shot/battery dies/broken he can still use the other, seeing as this is non life threatening airsoft, he probably has 2 different powers, one lower for searching one ridiculously bright for spotting/blinding.

The Chad · February 24th, 2013, 11:25

Thanks, makes sense

RacingManiac · February 24th, 2013, 12:20

Not sure what the rubber band is going to do for you if somehow your actual optic/PEQ mount fails....at that point you might as well take the part off and throw it at your opponent, as they don't do jack all at that point...

jtjcheng · February 24th, 2013, 21:03

You all have great points!

I did them just because I didn't have zipties to do the jobs at the time I took the photos. The replica EOTech cover doesn't lock itself well and recoil bumps it open from time to time and I lose battery connection.

On AN-PEQ, yes, no use if it gets loose, but better than losing it in the field where I can't even find it.

On pistol grip, yes, more grips, that's all...

I just use whatever in my hand at the time to do it...I can't make the gun pretty when I'm doing the job in the field...maybe it's the time to make my buddy pretty now...since it serves me too well...

Quote:

Originally Posted by RacingManiac

Not sure what the rubber band is going to do for you if somehow your actual optic/PEQ mount fails....at that point you might as well take the part off and throw it at your opponent, as they don't do jack all at that point...

Spawn28 · February 24th, 2013, 22:08

This is my new and first gbbr. I think I'm hooked

Disco_Dante · February 24th, 2013, 22:44

You made a great choice!

Deadpool · February 24th, 2013, 22:57

Quote:

Originally Posted by Spawn28

This is my new and first gbbr. I think I'm hooked

It's like crack!

I bet you giggled like a little girl the first time you shot it.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 21st, 2013, 20:58	#676
The Chad formerly LoveMyStubby Trader rating Join Date: Dec 2008 Location: SW ON	Not done yet but one full gun so far. GBBRs are a pleasure to build from the ground up. No magpul in sight! It's all g&p woc minus some rs parts and the body. http://airsoftcanada.com/showthread.php?t=140693 . image.jpg Last edited by The Chad; February 21st, 2013 at 21:07..

February 24th, 2013, 05:05	#681
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Why is there so many elastics? The one on PEQ, Eotech, and pistol grip. Usually RS operators use zipties for the PEQ, the optics, I haven't seen anyone do that for zipties though. Optics should always be tight on.. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

February 24th, 2013, 09:40	#682
Aper E-30 Trader rating Join Date: Jan 2004 Location: Aegiis's Neighbor.	Normally you use elastics on the pistol grip / foward vertical grip for a better grip / non-slipperish grip. AS for the one on the stock it's maybe to make sure the release catch doesn't wobble and by that making some noise. As for the others (An/Peq, EOTech), I have no fucking clue lol. __________________ West Coast EOD Supporter. // Bang One, Bang Em All ! // In war, it's not who's right, but who's left.

February 21st, 2013, 21:32	#678
The Chad formerly LoveMyStubby Trader rating Join Date: Dec 2008 Location: SW ON	Elcan will go behind, once i get one. It belongs on the C7 upper I'm working on but the only other sight I have is a crappy aeg one.

February 24th, 2013, 09:56	#683
The Chad formerly LoveMyStubby Trader rating Join Date: Dec 2008 Location: SW ON	Good mount hardware shouldn't need zip ties or elastics. I'm afraid to leave elastics on anything too long, I've had multiple items react with the rubber and the elastic became part of it. Putting an elastic on the stock is good when you need to be sneaky, I agree. Hockey tape is decent for added grip, stippling though time consuming, is probably the best. Can anyone tell me why there is two flashlights on jarhead's perty gun?

February 24th, 2013, 11:25	#685
The Chad formerly LoveMyStubby Trader rating Join Date: Dec 2008 Location: SW ON	Thanks, makes sense

February 24th, 2013, 12:20	#686
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	Not sure what the rubber band is going to do for you if somehow your actual optic/PEQ mount fails....at that point you might as well take the part off and throw it at your opponent, as they don't do jack all at that point... __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

February 24th, 2013, 22:08	#688
Spawn28 I am manly hear me squeek Trader rating Join Date: Apr 2007 Location: North Bay The Gateway to Hells Ars!	This is my new and first gbbr. I think I'm hooked __________________

February 24th, 2013, 22:44	#689
Disco_Dante Trader rating Join Date: Oct 2007 Location: GTA	You made a great choice! __________________ Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life.

This is GBBR thread.

Airsoft Media