|
|
|
February 24th, 2008, 22:42
|
#46 | |
|
kos
|
Quote:
 !
|
|
|
|
|
February 25th, 2008, 00:33
|
#47 |
|
a.k.a. Kody_1
|
Ya,the back portion will be a breeze with the reamer tool I'm having made.What I mean is the cylinders will not even slide in up to the thickened back part of the cylinders.you would think they should slide in for the first 5" till they hit that point you need to mill out.After lapping with a 1" steel dowel for about 15 minutes ,the blue slides in to the ridge,the gold slides about half way and the two red ones I have to twist them in.So the cylinders vary in diameter a few thou .Just wondering if anyone else has run into this before.4 RS uppers ,4 cylinders what are the odds I'm the only one
 .Just saying I haven't read anything about this. That's all. lapping is working.The Colt upper with the bigger front take down pin hole,I have a bushing with an off set hole.I plan on loctiteing it in perm, when and if I use that upper.I'm leaning more to the flat top armalite for now.But am planing on spare complete uppers later .
|
|
|
|
|
February 25th, 2008, 00:42
|
#48 |
|
The red cylinders use an o-ring to seal the cylinder head to the cylinder. They may be slightly ballooned due to the o-ring. This will obviously alter it's diameter by a tad.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
February 25th, 2008, 11:27
|
#49 | ||
|
Quote:
Quote:
do not locktite that bushing on the SP1, it needs to move around to have the SP1 flush againsnt the lower so there will be no crack, well mine is that way..... I have no problem with all 4 cylinders... well the red is a very snug, but the rest is good Last edited by leblanc74; February 25th, 2008 at 11:32.. |
||
|
|
|
|
February 25th, 2008, 12:43
|
#50 |
|
holy.. That is one pricey ptw.
 What hongkong company did the engraving and what did it cost? |
|
|
|
|
February 26th, 2008, 00:46
|
#51 | |||
|
Quote:
Quote:
In my point of view, my buddy's one is way more insane than mine. Quote:
Guns & Guys does the engraving. It cost around $150USD for the engraving on the low receiver and the barrel.
__________________
Last edited by 6ft4; February 26th, 2008 at 00:49.. |
|||
|
|
|
|
February 26th, 2008, 00:48
|
#52 |
|
|
Few more pics after i have moved the Vltor Low profile gas block out alittle bit.
at the same time, i accidentally made a few scatches on the gas block.
__________________
|
|
|
|
|
February 26th, 2008, 11:51
|
#53 | |
|
|
Quote:
|
|
|
|
|
|
March 4th, 2008, 22:36
|
#54 | |
|
|
Quote:
__________________
|
|
|
|
|
|
March 1st, 2009, 02:39
|
#55 |
|
|
finally put the Prime CNC Colt Marking Lower Receiver and change the trigger from Magpul to KAC
__________________
|
|
|
|
|
March 1st, 2009, 02:47
|
#56 |
|
A-56 aka Mr.Hitman
|
Oh dude, that is sex right there. Get a better stock.
|
|
|
|
|
March 5th, 2009, 06:24
|
#57 | |
|
|
Quote:
waiting for it arrives....
__________________
|
|
|
|
|
|
March 5th, 2009, 15:14
|
#58 |
|
I think its a beaut...
I would ( and Im just stating what i think would be Tacticool ) is if you changed the scope and put a full stock on. Just like this Balckwater sniper... YouTube - Blackwater Snipers in Najaf, Iraq I am in love with his rifle... |
|
|
|
|
|
March 5th, 2009, 16:05
|
#59 |
|
|
|
|
|
|
March 5th, 2009, 16:09
|
#60 | |
|
Wow, now thats realism, even putting in a Vtlor gas block on a PTW. Though I don't see a gas tube from the camera angles.
Its ironic, when the toy gun cost more than the real-deal. And ends up being a "safe-queen" as its too beautiful to get skirmished with, as scratches, beauty marks, are just too unbearable! Sucks too when the new blaster doesn't go bang, and becomes a giant paper-weight, though a chicks-dig-it/cool-guy paper weight at that! But hey power to you, for having one kick ass unique looking airsoft gun, so realistic I would have to break open the receiver or pull the charging handle to verify its a replica. Quote:
  
__________________
http://www.youtube.com/user/ICTTacAirsoft "I am prepared to meet my Maker. Whether my Maker is prepared for the great ordeal of meeting me is another matter" -Winston Churchill "Train as you fight!" Last edited by Ming_the_Merciless; March 5th, 2009 at 16:13.. |
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
