February 25th, 2014, 16:52 | #46 |
With this type of valve Air and Co2 are interchangeable.
No need for an expensive regulator. if you choose HPA you can set up with a scuba fill station for under $150 and that would give you (guess 7000 + rds) fill cost $7 a 12 oz tank with a $4 fill would give you 3000 to 4000 rds.. if you were starting from scratch ( which most are not ) Air is cheaper and easier the batteries I think. If you play at a field Air ii Free and is usually located for self serve in the middle of the field. |
|
February 25th, 2014, 16:54 | #47 |
the Tippmann 98 vale runs on all AIr types.... and at pressures 300 psi to 3000 psi so Air / Co2 and Nitrogen.. it would run on propane as well if you could get it there..
|
|
February 25th, 2014, 16:56 | #48 |
How much sand CAN you fit in your vagina!?
|
But you have a hose to your gun the hole time, correct? Kind of an important "avoid" in airsoft. Don't GBBR users using CO2 or HPA play endurance games without a hose?
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection... |
February 25th, 2014, 17:00 | #49 | |
Quote:
or you run 12 grams in the 80 round mags.. this wont be for everyone for sure.. but for those in cold climates or that like the blow back action it is a really good option.. |
||
February 25th, 2014, 17:05 | #50 |
How much sand CAN you fit in your vagina!?
|
I see. I guess it would make a good starter GBBR, or indoor gun though.
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection... |
February 25th, 2014, 18:15 | #51 |
Air system: HPA has to be regulated. Standard HPA valving is between 650 and 950 psi.. no problem for any standard hpa paintball tank. CO2 by nature is unregulated at the tank and regulated by the internal valving.
If you're looking for an hpa tank to work with a remote line setup, ANY paintball hpa tank will be just fine. Personally, i'm a big fan of the Ninja tanks as currently their valves have the most consistent output pressure. NOTE: if purchasing an hpa tank for use in Canada, MAKE SURE it has the appropriate TC stamp on it. No TC stamp, no go. There is also a CE stamp that will be accepted as of Sept this year, but look for the TC to be safe. 12g magazines. The 12g is fit into the mag using an hourglass pressure fit. I tested mags upside down in rigs and did not lose a cartridge once.
__________________
The Tier One Tactical Operator Tippmann Arms M4A1 KWA USP .45, KJW P226, KJW hi-cappa |
|
February 25th, 2014, 18:57 | #52 |
When can we expect this to hit the market?
__________________
|
|
February 25th, 2014, 19:13 | #53 |
I,ll pass !
__________________
Weapons : 39 airsoft weapons. Daf YA 314, 3 ton Dutch Army Truck. Retired Reg.Force 1 Brigade RECCE. nmvac.org |
|
February 25th, 2014, 19:38 | #54 |
I was honestly hoping for real cap mags and a bitchin' blow back system (co2 GBBr?) when I saw this.
Can the hopup unit accommodate things like enhanced buckings, tightbores and modify flat hops?
__________________
Age Verifier - Lower Vancouver Island Brotherhood of Nod - Nod Prime || Vancouver Island Airsoft League - President Unavailable for AV until April 2020. |
|
February 25th, 2014, 19:45 | #55 |
How much sand CAN you fit in your vagina!?
|
They said the hop-up is proprietary, don't know about buckings, but it takes AEG cut barrels.
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection... |
February 25th, 2014, 20:06 | #56 |
with Tippmann making a serious Airsoft gun, companies like Tect and lapco will not be far behind in doing Up Grades,,
Forget this Gun , That's whats really exciting about this development lol Up'd vales upgrades and bolt and trigger mods are already in production for a lot of the 98 parts used in this gun. companies like this would be a very positive thing for Airsoft as a whole.. these companies rock at building in shop cnc machined upgrade parts https://www.techtpaintball.com/ |
|
February 26th, 2014, 11:10 | #57 |
Tippmann USA is a small fish recently bought by GI Sportz Canada.
The big company to watch for is Empire which bought out multiple companies which can put a bigger dent. Last edited by SuperHog; February 26th, 2014 at 11:13.. |
|
February 26th, 2014, 11:13 | #58 |
this might make me consider getting something other than my beloved F2000
|
|
February 26th, 2014, 11:29 | #59 |
That thing looks cheep as balls. No thanks tippmann, I'm sticking to my AEG.
|
|
February 26th, 2014, 12:36 | #60 |
SuperHog, I hate to break it to you, but Tippmann is one of the largest paintball companies worldwide, and has been for years. The merger between GI Sportz and Tippmann corrected the 2 areas that Tippmann was lacking in; paintballs themselves, and broad range soft goods.
Tippmann's 98 Custom continues to be the #1 selling paintball marker worldwide. Kee (Empire), while huge in the number of companies it has in it's stable (Empire, BT, Halo, JT, RPS, Extreme Rage, Pure Energy), has had its own share of problems over the years. Kee has also stated they have no desire to enter the airsoft world. Cheap? I'll put Tippmann's gun up against any AEG out there for durability and reliability. They build things to last and be reliable. There are original Tippmann 98's still being used as field rental markers... making them 16 years old and still going strong.
__________________
The Tier One Tactical Operator Tippmann Arms M4A1 KWA USP .45, KJW P226, KJW hi-cappa |
|
|
Bookmarks |
|
|