Looking for a good machinist!

deadlydayne · July 22nd, 2011, 00:49

they are a little smaller than the box you sent me

Ross · July 22nd, 2011, 00:55

Oh. So I take it, you got my package?

deadlydayne · July 22nd, 2011, 01:00

"Package" or Box 'O money? either way, yea I got it today. =)

Ross · July 22nd, 2011, 01:03

you've just been xbox live stalked. it's amazing what happens when you type deadlydayne into google.

deadlydayne · July 22nd, 2011, 01:03

HAHAHA did you find me on XBL now?

Ross · July 22nd, 2011, 22:01

Yup.

KrashRider · July 22nd, 2011, 23:57

I just got my CNC part 66 and it is way off spec. It doesn't fit tight in part 27 and the stock is not straight when I mount part 66. I'm going to complain but shipping back to Airsoft Buddy is not going to be worth it. Just better to put the shipping money into another part 66 from a better source.

deadlydayne any chance you would consider cutting some part 66? I would rather pay you for a better quality part then pay again for another Chinese hack job.

Ross · July 23rd, 2011, 00:04

jesus, another one! They must be getting sloppy on their machines

dwinandabp · July 23rd, 2011, 01:08

[QUOTE=KrashRider;1505747]I just got my CNC part 66 and it is way off spec. It doesn't fit tight in part 27 and the stock is not straight when I mount part 66. I'm going to complain but shipping back to Airsoft Buddy is not going to be worth it. Just better to put the shipping money into another part 66 from a better source.

same thing happened to me, the holes and fitting didn't aligned very well to the stock.
I had to file certain areas to fit in at least to minimize the problem

Ross · July 23rd, 2011, 01:22

Mine fit like a glove. A tight glove. I feel like I got lucky.

deadlydayne · July 23rd, 2011, 12:07

I tried to make them a little tight on tolerances as when I made mine it was a little loose on Part 66, and allowed my stock to slide up and down. So i tightened it up a bit but, I have no idea on the QC for TSC's 66.

Fox62 · July 23rd, 2011, 13:23

Quote:

Originally Posted by KrashRider

I just got my CNC part 66 and it is way off spec. It doesn't fit tight in part 27 and the stock is not straight when I mount part 66. I'm going to complain but shipping back to Airsoft Buddy is not going to be worth it. Just better to put the shipping money into another part 66 from a better source.

deadlydayne any chance you would consider cutting some part 66? I would rather pay you for a better quality part then pay again for another Chinese hack job.

Mine was **** too. I sent some pictures to RedWolf Airsoft and they sent a replacement. The paint job on these seems to always be different though, and never matches either the upper, nor the stock color.

Fox.

deadlydayne · July 23rd, 2011, 20:09

Thats why I don't do FDE or any color other than black, That color is way to hard to match exact, and its easy to spot when it doesn't match.

KrashRider · July 23rd, 2011, 21:04

Quote:

Originally Posted by Fox62

Mine was **** too. I sent some pictures to RedWolf Airsoft and they sent a replacement. The paint job on these seems to always be different though, and never matches either the upper, nor the stock color.

Fox.

Good to hear. Just by looking or pic can't see the problem. Maybe a pic of the part installed will show the alignment. I'll try to send a pic but I will hold my breath.

deadly: did you give any thought to doing up a matching part 66 for your 27?

Ross · July 24th, 2011, 00:23

Quote:

Originally Posted by KrashRider

deadly: did you give any thought to doing up a matching part 66 for your 27?

He originally was making a part 66 with the part 27. But just as he was about to start, tsc popped out of nowhere and made it. A few of us got them right away, and they fit fine, so he decided not to make them. But let's see if that changes.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 22nd, 2011, 00:55	#542
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	Oh. So I take it, you got my package? __________________

July 22nd, 2011, 01:03	#544
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	you've just been xbox live stalked. it's amazing what happens when you type deadlydayne into google. __________________

July 22nd, 2011, 22:01	#546
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	Yup. __________________

July 22nd, 2011, 00:49	#541
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	they are a little smaller than the box you sent me

July 22nd, 2011, 01:00	#543
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	"Package" or Box 'O money? either way, yea I got it today. =)

July 22nd, 2011, 01:03	#545
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	HAHAHA did you find me on XBL now?

July 22nd, 2011, 23:57	#547
KrashRider Trader rating Join Date: May 2011 Location: Airdrie	I just got my CNC part 66 and it is way off spec. It doesn't fit tight in part 27 and the stock is not straight when I mount part 66. I'm going to complain but shipping back to Airsoft Buddy is not going to be worth it. Just better to put the shipping money into another part 66 from a better source. deadlydayne any chance you would consider cutting some part 66? I would rather pay you for a better quality part then pay again for another Chinese hack job. Last edited by KrashRider; July 23rd, 2011 at 00:00..

July 23rd, 2011, 00:04	#548
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	jesus, another one! They must be getting sloppy on their machines __________________

July 23rd, 2011, 01:08	#549
dwinandabp Trader rating Join Date: May 2011 Location: Jakarta, Indonesia	[QUOTE=KrashRider;1505747]I just got my CNC part 66 and it is way off spec. It doesn't fit tight in part 27 and the stock is not straight when I mount part 66. I'm going to complain but shipping back to Airsoft Buddy is not going to be worth it. Just better to put the shipping money into another part 66 from a better source. same thing happened to me, the holes and fitting didn't aligned very well to the stock. I had to file certain areas to fit in at least to minimize the problem

July 23rd, 2011, 01:22	#550
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	Mine fit like a glove. A tight glove. I feel like I got lucky. __________________

July 23rd, 2011, 12:07	#551
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	I tried to make them a little tight on tolerances as when I made mine it was a little loose on Part 66, and allowed my stock to slide up and down. So i tightened it up a bit but, I have no idea on the QC for TSC's 66.

July 23rd, 2011, 20:09	#553
deadlydayne Trader rating Join Date: Mar 2011 Location: Michigan, USA	Thats why I don't do FDE or any color other than black, That color is way to hard to match exact, and its easy to spot when it doesn't match.

Looking for a good machinist!

Upgrades & Modifications